Showing 1–12 of 71 results

Thread Extruder Nozzle For 3D Printer (0.3mm)

  • Filament Support: 1.75mm
  • Material: High-quality brass
  • Color: Brass color
  • Nozzle Accuracy: 0.3mm
  • Screw outer diameter: M6

0.5mm 3D Printer Extruder Brass Nozzle

  • Filament Support: 1.75mm
  • Material: High-quality brass
  • Colour: Brass colour
  • Nozzle Accuracy: 0.5mm
  • Screw outer diameter: M6

145mm Trapezoidal Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut

  • Rod Size: 8X145mm
  • Lead (the straight distance which turn a circle): 8mm
  • Nut Diameter: 8 mm.
  • Color: silver and gold
  • Material: Stainless steel and brass
  • Mainly use for Stepping motor driving guide rail.
  • T shape design, made of high-quality stainless steel material.
  • Easy to install and convenient to use.
  • Fine producing and practical.
 

PR34 2004 LCD Display Smart Controller W or Adapter for RAMPS1.4 Reprap 3D Printer

  • RAMPS 1.4 2004 LCD Display intelligent controller.
  • LED background light control circuit, a small function of the intelligent controller,
  • With pin short time to decide on all LED turn or steering 30 seconds
  • You can turn on the light time to do the long or short form of the adjustment TRIMM R4100K from 10 seconds to 2 minutes.
  • Plug and play on the RAMPS, but need to modify the firmware to support.
  • The product comes encoder parameter adjustment can be achieved, and the file selection print.
  • With an SD card base on the back, put slicing file into the SD card and select the file on the LCD, then can be printing.

Double Head 2 in 1 out J-Head Remote Extruder 3D Printers

  • Material: Aluminium Alloy.
  • Style: Long Distance Universal Accessories Set.
  • Nozzle: 0.4mm.
  • Filament: 1.75mm.

Creality CR-5 Pro 3D Printer with bl touch and silent motherboard 500w meanwell

• Print Size: 300*225*380mm • Machine Size: 530*487*612mm • Package Szie: 625*547*710mm • Filament diameter: 1.75 mm PLA/ABS • File Format: STL/OBJ/AMF • Layer Heigh: 0.1-0.4mm • Sicer software: Creality Slicer, Cura, Simplify3D, Repetier-Host • Connectivity: Online/SD card • Mainboard: ATmega2560 Silent board • UI interface: 4.3inch touch screen

Creality ender 5 plus print large build volume ender 5 plus 3d printer with bl touch color

  •  Print Size: 300*225*380mm
  • Machine Size: 530*487*612mm
  •  Package Szie: 625*547*710mm
  • Filament diameter: 1.75 mm PLA/ABS
  • File Format: STL/OBJ/AMF
  •  Layer Heigh: 0.1-0.4mm
  • Slicer software: Creality Slicer, Cura, Simplify3D, Repetier-Host
  •  Connectivity: Online/SD card
  • Mainboard: ATmega2560 Silent board
  • UI interface: 4.3inch touch screen

100K ohm NTC 3950 Thermistor/Temperature Sensor for Reprap 3D printer Extruder

₹90.00 inc. GST
  • High-temperature Teflon wire temperature: 200 degrees
  • Nominal resistance R25 (25 ℃): 100k
  • Resistance accuracy: ± 1%
  • B value R25 / 50: 3950k
  • B value accuracy: ± 1%
  • Operating temperature range: -40 ℃ ~ +300 ℃
  • Dissipation power factor: ≥ 5 mW / ℃ (static air)
  • Thermal time constant: ≤ 7S (static air)
  • Maximum rated power: 45mW
  • Wiring length: 1 meter
  • Material: glass glaze film

12V 40W Ceramic Cartridge Heater 6mm*20mm For Extruder 3D Printers

₹160.00 inc. GST
  • Material: stainless steel,
  • Core: ceramic.
  • Voltage: 12V.
  • Power: 40W.
  • Diameter: 6mm, Heating Length: 20 mm.
  • Wire Length: 100 cm.
  • Works on many 3D printers, including RepRap and Prusa models.
  • It fits nicely in our extruder, so it’s an easy replacement.
  • Small but powerful.
  • Get your hotend hot quickly.
  • This unit is a more powerful unit than the standard unit for many 3D printers.

Lead Copper Nut 8mm

₹175.00 inc. GST
  • Diameter Size: 8 mm.
  • Colour: Brass Colour.
  • Material: Brass.
  • Weight: 12 gm.
  • Lead (the straight distance which turn a circle): 8 mm.
  • Mainly use for Stepping motor driving guide rail.
  • Easy to install and convenient to use

24V 40W Ceramic Cartridge Heater Wire For 3D Printer

₹175.00 inc. GST
  • Voltage: 24V, Power: 40W
  • Material: 304 Stainless Steel
  • Wire Length :1M
  • Diameter: 6mm
  • Length: 20 mm
  • Works on many 3D printers, including RepRap and Prusa models.
  • It fits nicely in our extruder, so it’s an easy replacement.
  • Small but powerful.
  • Get your hotend hot quickly.
  • This unit is a more powerful unit than the standard unit for many 3D printers.

SK8 Linear Rail Shaft Guide Support Bracket For 3D Printer Bearing CNC Stepper Motor

₹180.00 inc. GST
  • Model: SK8.
  • Shaft ID: 8mm
  • Mounting Hole Diameter: Approx. 5.5 mm
  • Center Hole Distance: Approx. 32 mm
  • Material: Steel
  • Light and simple design
  • High torque capacity
  • High rigidity
  • High positioning accuracy, high rotating accuracy
  • High efficiency
  • Riding stability
  • Dimensions: 14 x 42 x 32 mm
  • Weight: 30gm