Showing 1–12 of 19 results

30AMPS ESC DYS

₹1,450.00 inc. GST
  • Input Voltage: 11.1 ~ 11.7 V.
  • Constant Current: 30A (Max 40A<10s).
  • BEC: 5V/3A.
  • Li-Po battery: 2S ~ 3S.
  • Ni-MH 4-10 CELLS Auto Detect.
  • Separately voltage regulator IC for the microprocessor, providing good anti-jamming capability.
  • Used with SimonK updated firmware for Multicopter
  • Battery side – Male deans (T) connector.
  • Motor side – Female 3.5mm gold connector.
  • 30A ESC for BLDC has onboard BEC.
  • Developed specifically for multi-rotor use
  • Smooth, linear, and precise throttle response
  • Extreme low output resistance, super current endurance
  • Auto Low Battery Slow down at 3.0V/cell Lipo, cut-off at 2.9V/cell lipo.
  • Supported motor speed (Maximum): 210000 RPM (2 poles), 70000 RPM (6 poles), 35000 RPM (12 poles).
  • Dimension: 46* 26 * 11mm
  • Weight: 23g

5045(5×4.5) SF Propellers 2CW+2CCW-2pair

₹100.00 inc. GST
  • Length: 5″.
  • Pitch: 4.5″.
  • Weight: 22 gm.
  • Shaft diameter: 5mm.
  • Total length:  5 inch / 125 mm.
  • Material: Glass Fiber Nylon
  • Durable plastic construction provides both lightness and rigidity.
  •  5045(5X4.5) Glass Fiber Nylon Bullnose Black Propellers comes with an Epoxy resin cover.
  • Very strong and lightweight.
  • Quick to release, quick to attach
  • New design propellers, with greater aerodynamic efficiency, good lifting capacity.
  • Dimensions: 30 x 6 x 4 cm
  • Weight: 26 gm.

8045(8X4.5) Propeller

₹149.00 inc. GST
  • Length: 8″
  • Pitch: 4.5″
  • Weight: 36.5g
  • Shaft Diameter: 6mm
  • Total Length: 177mm
  • Material: ABS
  • Durable plastic construction provides both lightness and rigidity.
  •  1245(12X4.5) Carbon Fiber Black comes with an Epoxy resin cover.
  • Very strong and lightweight.
  • Includes set of plastic reducers (3, 3.17, 4, 4.70, 5, 6, 6.25 mm).
  • Quick to release, quick to attach
  • New design propellers, with greater aerodynamic efficiency, good lifting capacity.
  • Dimensions: 30 x 6 x 4 cm
  • Weight: 25gm

AfroFlight Naze32 Rev6 Flight Controller Board

₹1,749.00 inc. GST
  • Version: 6 DOF
  • Input voltage: Max 16V on input rail and up to 35V 6s on the voltage sense line
  • USB on right side
  • 32-bit processor running at 3.3V/72MHz (STM32F103CB).
  • Up to 8 Ch. RC input - supports standard receivers (PWM), PPM Sum receiver (FrSky, etc), or Spectrum satellite receivers
  • Built-in FrSky telemetry inverter
  • Battery voltage monitoring
  • SBUS Inverter built-in
  • Spectrum satellite
  • Modern GUI for all operating systems, Baseflight Configurator.
  • Supports multiple platforms: Quad/Hexa/Tri/Bi/Y4/Y6/Octo/Camera Gimbal. (Default is Quad-X)
  • MPU6500 : 3-Axis MEMS Gyroscope + accelerometer
  • Onboard MicroUSB for setup and configuration
  • BMP280 barometer
  • Modern GUI for all operating systems, Baseflight Configurator.
  • Sonar pads w/resistors added for direct connection to 5V sonar3.3V
  • Dimensions: 36x36 mm (30.5mm Mounting)
  • Weight: 5.3 grams (no headers, 7.3 grams with).
 

Ardupilot Mega APM 2.8 Flight Controller

₹2,999.00 inc. GST
  • Model: APM 2.8
  • Input Voltage (V): 12-16 V.
  • Processor: ATMEGA2560 and ATMEGA32U-2
  • Micro SD card slot: No.
  • Arduino Compatible
  • MPU6000 : 3-Axis MEMS Gyroscope + accelerometer
  • High-performance Barometer upgraded to MS5611-01BA03, from Measurement Specialties.
  • Support hundreds of 3D waypoints
  • Full mission scripting with point-and-click desktop utilities
  • Two-way telemetry and in-flight command using the powerful MAVLink protocol
  • Powerful Ground Control Software
  • Supports full "hardware-in-the-loop" simulation with Xplane and Flight Gear
  • On-board 4 Megabyte Data flash chip for automatic data logging.
  • Optional off-board GPS, an uBlox LEA-6H module with Compass.
  • Dimensions: 70 x 45 x 15mm
  • Weight: 70gm
 

CC3D flight Control

₹1,749.00 inc. GST
  • Powerful STM32 32-bit microcontroller running at 90 MIPS with 128KB Flash and 20KB RAM.
  • 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer.
  • Tiny 36 x 36 mm 4 layer PCB for superior electrical noise reduction and flight performance.
  • Software support for Windows, Mac, and Linux.
  • Supported by powerful OpenPilot GCS
  • 10 PWM outputs to servos or ESC’s, or for camera stabilization
  • Direct high-speed USB support with no drivers required, a true plug and play device.
  • Spectrum satellite receiver support.
  • Futaba S-BUS hardware support.
  • With a function of being directly plugged into the satellite receiver
  • 10 PWM outputs to servos or ESC’s, or for camera stabilization
  • Innovative Flexi-port technology for superior port flexibility.
  • 4Mbits on-board EEPROM for configuration storage.

F450 Quadcopter Frame

₹1,500.00 inc. GST
  • Model: F450
  • Frame width: 450mm
  • Frame height: 55mm
  • Frame Weight: 282g
  • Take-off Weight: 800g ~ 1200g
  • Motor Mount Bolt Holes: 16/19mm
  • Landing Gear Height: 150mm
  • Landing Gear Weight: 90gm
  • Made by advanced engineering material, super strong & smooth.
  • High quality and strong ability of anti-fall, lower maintenance cost.
  • Compact design with small numbers of components, you can assemble it by yourself quickly and easily.
  • Recommended Propeller: 10x4.5in;8x4.5in
  • Recommended Battery: 3S~4S LiPo
  • Recommended Motor: 22x12mm (Stator size)
  • Recommended ESC: 20A/30A ESC

F550 HEXACOPTER FRAME

₹1,999.00 inc. GST
  • Model: F550
  • Material: Glass Fiber + Polyamide-Nylon
  • Wheelbase: 550mm
  • Arm Size : 220 x 40mm
  • Motor Mounting Hole Diameter: 3mm
  • Landing Gear Material: ABS Plastic
  • Landing Gear Height (mm): 200
  • Landing Gear Color: Black
  • Landing Gear Weight: 75gm
  • Comes with Black, Red, and White arms for easy orientation during flying
  • Plastic injection molding ensures hardness and lighter weight
  • Built from high-quality glass fiber and nylon
  • Easy to build and assemble
  • Made by advanced engineering material, super strong & smooth
  • Easy to assemble and disassemble.
  • The frame is tough and durable.
  • The arm equips support ridges for better and faster forward flight.
  • In-built power distribution board.
  • Large Center plate allows mounting of gimbals and camera for FPV and aerial photography
  • Weight:624gm

FlySky 2.4Ghz 6CH Receiver

₹1,299.00 inc. GST
  • Item Name: FS-R6B Receiver
  • Brand Name: Flysky
  • Power input: 4.0 -6.5 V DC
  • RF power: less than 20DBm
  • Modulation: GFSK
  • Code type: PCM
  • Sensitivity: 1024
  • PWM channels: 6
  • Protocol: AFHDS
  • Distance: >150m
  • Antenna type: Built-in antenna
  • Low voltage warning: LED
  • Charger port
  • Certificate: CE,FCC,RoHS
  • Dimension: 30*25*8mm
  • Weight: 25g

Flysky CT6B 6 Channel

₹4,000.00 inc. GST
  • Channels: 6 Channels
  • Operating Voltage: 12V DC (1.5AA x 8 Battery).
  • Model type: Heli, Airplane, Glider
  • RF Power: Less than 20db
  • Modulation: GFSK
  • Code Type: 2.4Ghz No Interference
  • Sensitivity: 1024.
  • Bandwidth: 500 kHz.
  • Default Operating Mode: Mode 2 (Left-Hand Throttle).
  • Low Voltage Warning: LED
  • We can programme by PC with the included software.
  • Super active and passive anti-jamming capabilities.
  • Very low power consumption.
  • 4 Types (Airplane, Heli90, Heli120, Heli140).
  • DSC Port: Yes
  • Charger Port: Yes
  • ANT length: 26mm
  • Certificate: CE FCC
  • Dimension: 190*80*240mm
  • Weight: 680g
 

Flysky FS-i6 6 Channel

₹6,500.00 inc. GST
  • Bandwidth (kHz): 500.
  • RF Range (GHz): 2.40 ~ 2.48.
  • No. of channels: 6.
  • Remote controller weight (gm): 400.
  • Power: 6V (1.5V AA*4).
  • Antenna Length: 26mm * 2 (dual antenna).
  • Transmitting Power: ≤ 20dBm.
  • RF Receiver Sensitivity: -105dbm.
  • Entry-level 6 channel 2.4GHz radio with telemetry capability.
  • Easy to use Programming & Navigation Buttons.
  • Supports Heli/Standard Wing/Elevon/V-Tail.
  • 20 Model Memory.
  • 8 Character Model Name.
  • Trainer and charging ports.
  • The backlight LCD screen displays real-time transmitter and receiver voltage.
  • 4 Stick Mode Selectable.

Flysky FS-TH9X 9Channel With FS-R8B

₹6,000.00 inc. GST
  • Transmitter: FS-TH9X Upgrade with FS-RM003 2.4GHz Module
  • Receiver: FS-R8B
  • Default Mode: Mode-2
  • Input Power: 12V DC (1.5V x 8 AAA Battery)
  • Bidirectional System
  • Frequencies-Hopping
  • Omni-directional High Gain Antenna
  • Low Power Consumption
  • Colour: Black
  • Charger Port: Yes(DC Port)
  • Data Output: PPM
  • Channel Resolution: 4096
  • Channel Delay: Better than 30us
  • Display: STN VA-73 39mm LCD
  • DSC port: 3.5mm:output:PPM
  • Dimension:185*220*110mm
  • weight: 690gm