Showing 1–12 of 25 results

7” Touch Screen

4,000.00 inc. GST
  • 800×480 high resolution.
  • Viewable screen size: 155mm x 86mm
  • 10 finger capacitive touch
  • Supports Raspberry Pi, and the driver is provided (works with custom Raspbian directly).
  • Supports BB Black, comes with related images like Angstrom.
  • Supports Banana Pi / Banana Pro, comes with related images like ubuntu, Raspbian.
  • Connects to the Raspberry Pi board using a ribbon cable connected to the DSI port.
  • Adapter board is used to power the display and convert the parallel signals from the display to the serial (DSI) port on the Raspberry Pi.
  • Require the latest version of Raspbian OS to operate correctly
  • Not only for mini-PCs, but it can also work as a computer monitor just like any other general HDMI screen (touch function is unavailable in this case).
  • HDMI interface for displaying, USB interface for touch control.
  • Backlight control to lower power consumption.
  • Screen Dimensions: 194mm x 110mm x 20mm

Aluminum Heatsink Cooler Cooling Kit for Raspberry Pi 3/2 Model 3B+ – 2 Piece

50.00 inc. GST
  • 3m - Sticker for best adhesiveness to the silicon.
  • Best aluminium - ensures best fin efficiency and fin effectiveness.
  • Colour: Black.
  • Suitable for raspberry pi models a, b, b+, 2, and 3 boards.
  • Can be applied with other devices such as the beaglebone.
  • Dimensions:
-  Large Heatsink: 14 x 14 x 6  mm -    Small Heatsink: 9 x 9 x 5  mm
  • Teeth Number:
-    Large Heatsink: 7 Teeth -Small Heatsink: 5 Teeth
  • Compatible with most Raspberry Pi cases
  • Compatible with other devices such as the Beaglebone
  • Compatible with stepper motors, motor driver boards, etc.

Arduino CNC Shield v3 Engraving Machine/3D Printer/A4988 driver GRBL compatible

199.00
  • Coolant enable
  • Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825, and others) (Not Included)
  • Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
  • Compact design.
  • Stepper Motors can be connected with 4 pin Molex connectors or soldered in place.
  • Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
  • Please note that this is an unassembled kit and needs soldering.
  • Latest Arduino CNC Shield Version 3.10
  • GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
  • PWM Spindle and direction pins
  • 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
  • 2 x End stops for each axis (6 in total)

Arduino Mega 2560 Board

799.00
  • Microcontroller: ATmega2560
  • Operating Voltage: 5V
  • Input Voltage (recommended): 7-12V
  • Input Voltage (limits): 6-20V
  • Digital I/O Pins: 54 (of which 15 provide PWM output)
  • Analog Input Pins: 16
  • DC Current per I/O Pin: 40 mA
  • DC Current for 3.3V Pin: 50 mA
  • Flash Memory: 128 KB of which 4 KB used by boot loader
  • SRAM: 8 KB
  • EEPROM: 4 KB
  • Clock Speed: 16 MHz

Arduino UNO R3 Clone

575.00
  • Microcontroller: ATMEGA328
  • Operating voltage: 5V
  • Input voltage: 7-12V
  • Digital I/O: 14 (6 provide PWM outputs)
  • Analog inputs: 6
  • Flash Memory: 32KB
  • SRAM: 2KB
  • EEPROM: 1KB
  • Clock Speed: 16MHz
  • DC Current per I/O Pin: 40 mA
  • DC Current for 3.3V Pin: 50 mA

ATtiny85 Arduino-enabled Mini USB Dev Board

200.00
  • Support for the Arduino IDE 1.0+ (OSX/Win/Linux)
  • Power via USB or External Source
  • Onboard 5V Regulator
  • Built-in USB
  • 6 I/O Pins
  • 8k Flash Memory (about 6k after bootloader)
  • I2C and SPI (vis USI)
  • PWM on 3 pins (more possible with Software PWM)
  • 10-bit ADC
  • ADC on 4 pins
  • Power LED and Test/Status LED
  • Low Power Consumption
  • Active Mode:1 MHz, 1.8V: 300 µA

AVR-ISP 10Pin to 6pin Adapter PCB for USBASP Programmer

470.00 inc. GST
  • Made of high-quality material, practical and durable
  • Number of Pinon USBASP side: 10.
  • Number of Pinon Device under programming side: 6.
  • Connector type on USBASP side: Male.
  • Connector type on Device under programming side: Female.
  • Header Pin Pitch: 2.54mm (0.1in).

ESP8266 ESP – 01

175.00 inc. GST
  • 11 b/g/n
  • Wi-Fi Direct (P2P), soft-AP
  • Integrated TCP/IP protocol stack
  • Integrated TR switch, balun, LNA, power amplifier and matching network
  • Integrated PLLs, regulators, DCXO and power management units
  • +19.5dBm output power in 802.11b mode
  • Power down leakage current of <10uA
  • 1MB Flash Memory
  • Dimensions: 25 x 15 x 11 mm (LxWxH)
  • PCB Thickness: 1mm
  • Weight: 2 gm
  • SDIO 1.1 / 2.0, SPI, UART
  • STBC, 1×1 MIMO, 2×1 MIMO
  • A-MPDU & A-MSDU aggregation & 0.4ms guard interval
  • Wake up and transmit packets in < 2ms
  • Standby power consumption of < 1.0mW (DTIM3)
  • Integrated low power 32-bit CPU could be used as an application processor
  • A-MPDU & A-MSDU aggregation & 0.4ms guard interval
  • Wake up and transmit packets in < 2ms
  • Standby power consumption of < 1.0mW (DTIM3)

ESP8266 ESP – 03 WIFI Transreceiver Wireless Module

  • Communication interface voltage: 3.3V
  • Working current: 240mA(MAX)
  • 802.11 b/g/n
  • Wi-Fi Direct (P2P), soft-AP
  • Integrated TCP/IP protocol stack
  • Integrated TR switch, balun, LNA, power amplifier and matching network
  • Integrated PLLs, regulators, DCXO and power management units
  • +19.5dBm output power in 802.11b mode
  • Power down leakage current of <10uA
  • Integrated low power 32-bit CPU could be used as application processor
  • SDIO 1.1/2.0, SPI, UART
  • STBC, 1×1 MIMO, 2×1 MIMO
  • A-MPDU & A-MSDU aggregation & 0.4ms guard interval
  • Wake up and transmit packets in < 2ms
  • Standby power consumption of < 1.0mW (DTIM3)
  • SDIO 2.0, SPI, UART
  • 32-pin QFN package
  • Integrated RF switch, balun, 24dBm PA, DCXO, and PMU
  • Integrated RISC processor, on-chip memory and external memory interfaces
  • Integrated MAC/baseband processors
  • Quality of Service management
  • I2S interface for high fidelity audio applications
  • On-chip low-dropout linear regulators for all internal supplies
  • Proprietary spurious-free clock generation architecture
  • Integrated WEP, TKIP, AES, and WAPI engines

ESP8266 ESP – 07

299.00 inc. GST
  • Smallest 802.11b/g/n Wi-Fi SOC module
  • Low power 32-bit CPU, can also serve as the application processor
  • Up to 160MHz clock speed
  • Built-in 10 bit high precision ADC
  • Supports UART/GPIO/IIC/PWM/ADC
  • SMD-16 package for easy welding
  • Integrated Wi-Fi MAC/BB/RF/PA/LNA
  • Deep sleep current as low as 20uA
  • Embedded LWIP protocol stack
  • Supports STA/AP/STA + AP operation mode
  • Support Smart Config/AirKiss technology
  • UART baudrate up to 4Mbps
  • General AT commands can be used quickly
  • Supports remote firmware upgrade (FOTA)
  • WIFI Direct (P2P),SOFT-AP
  • Built-in TCP/IP
  • The AT command is perfect,efficient,concise
  • Support three modes: AP, STA and AP+STA coexistence mode
  • Onboard Chip Antenna
  • +19.5dBm output power in 802.11b mode
  • Power down leakage current of <10uA
  • SDIO 1.1/2.0, SPI, UART
  • STBC, 1×1 MIMO, 2×1 MIMO
  • A-MPDU & A-MSDU aggregation & 0.4ms guard interval
  • Wake up and transmit packets in < 2ms
  • Standby power consumption of < 1.0mW (DTIM3)

ESP8266 ESP-12E

175.00 inc. GST
  • LDR Light Sensor on board.
  • WS2812 Led on board.
  • Wireless Standard: IEEE 802.11 b/g/n protocol
  • Frequency Range: 2.412 - 2.484 GHz
  • Serial Transmission: 110 - 921600 bps, TCP Client 5
  • SDIO 2.0, SPI and UART Interface available
  • PWM available
  • One ADC channel available
  • Programmable GPIO available
  • Wireless Network Type: STA / AP / STA + AP
  • Security Type: WEP / WPA-PSK / WPA2-PSK
  • Encryption Type: WEP64 / WEP128 / TKIP / AES
  • Network Protocol: IPv4, TCP / UDP / FTP / HTTP
  • Operating Voltage: 3.3V
  • Maximum current allowed to draw per pin: 15mA
  • Power down leakage current of < 10uA
  • Integrated low power 32-bit MCU
  • Onboard PCB Antenna
  • Wake up and transmit packets in < 2ms
  • Standby power consumption of < 1.0mW
  • Operating Temperature: -40ºC to +125 ºC

ESP8266 ESP-12F

  • Communication interface voltage: 3.3V
  • Working current: 240mA(MAX)
  • Serial port baud rate: 115200 (default), can be modified to other values by AT command
  • Serial communication format: 8N1
  • Wireless Network Mode: station / softAP / SoftAP + station
  • Wireless criteria: 802.11 b / g / n
  • WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
  • +19.5dBm output power
  • Compatible with ESP-12(ESP-202)
  • It is very easy to develop projects with AT commands
  • Surface Mount Package with 2mm Pitch Pads
  • Mulitple GPIO’s for all your sensor needs
  • Integrated TCP/IP protocol stac
  • Integrated TR switch, balun, LNA, power amplifier and matching network
  • Integrated PLL, regulators, DCXO and power management unit
  • Power down leakage current of <10uA
  • Integrated low power 32-bit CPU could be used as an application processor
  • SDIO 1.1/2.0, SPI, UART
  • STBC, 1×1 MIMO, 2×1 MIMO
  • A-MPDU & A-MSDU aggregation & 0.4ms guard interval
  • Wake up and transmit packets in < 2ms
  • Standby power consumption of < 1.0mW (DTIM3)
  • Both SMD and Inline package are available, and the pin pitch is 2.0mm.