12V / 2A Battery Charger

₹650.00 inc. GST
  • This is a durable product with a 6-month warranty.
  • The adapter is easy to use.
  • It comes with a long wire.
  • Wide input voltage range (100VAC-280VAC).
  • Very low no-load power consumption.
  • Very low ripple & noise output for device safety.
  • Protections against- under-over voltage/ overload/ short circuit with auto-restart on fault removal.
  • Thermal shut down (140°C) with auto-restart on cold condition.
  • Soft start & low inrush current.
  • Isolation up to 3kv for 5sec.time period.
  • High operating ambient temperature up to 60°C.
  • Highly efficient, compact, durable and long life.

12V 18650 10A BMS Charger Li-ion Lithium Battery Protection Board Circuit Board 10.8V 11.1V 12.6V Electric

₹260.00 inc. GST
  • Full Charge Voltage: 12.6V to 13V
  • Over Current Protection
  • Under Voltage (Over-discharge) protection
  • Maximum Discharge Current: 8A ± 2A
  • Maximum Charging Current: 10A ± 1A
  • Short Circuit Protection
  • Quiescent Current: < 30 ±A
  • Working Temperature: -40° ~ 50° C
  • Effective life: > 30000 Hour

3S BMS BOARD 25A

₹300.00 inc. GST
  • Charging Voltage: 12.6V DC CC/CV
  • Balance Voltage for Single Cell: 4.2V
  • Max Continuous Charge/Discharge Current: 25A
  • Overcharge voltage range: 4.25-4.35v + 0.05v.
  • Over discharge voltage range: 2.3-2.7v + 0.05v.
  • Operating current: 0 – 25A.
  • Operating temperature: -40 – +50℃.
  • Instantaneous current: 35 – 40A.
  • Storage condition: -40 – +80℃.
  • Quiescent current: less than 30uA.
  • Balance current: about 40 – 50mA.
  • Effective life: more than 30000 hours.
  • Internal resistance: less than 100m ohms.
  • Short-circuit protection: protection, delayed self-recovery.

Dual Micro USB 3.7v to 5V 2A Power Bank DIY 18650 LiPo Charger

₹250.00 inc. GST
  • 4-level LED lamp display power, not working state intelligent automatic shutdown;
  • The built-in lithium battery protection IC, over-current, under-voltage protection;
  • Dual USB output ports.
  • Dimensions: 68 x 34 x 9 mm (LxWxH)
  • Weight: 10 gm
  • Input port: MicroUSB (Andro)
  • Input requirements: 5V constant voltage power supply can do charge input power, the most matching charger for 5v1a above
  • Output port: USB
  • Output parameters: 5V1A/5V2A
  • Requirements for rechargeable batteries:
  • Compatible Batteries: 18650 batteries, cell phone batteries, flat-panel batteries, MP3 batteries, etc. 3.7v-4.2V polymer Lithium battery,
 

Dual USB 5V 1A 2.1A Mobile Power Bank Battery Charger

₹350.00 inc. GST
  • Micro USB input: 5V 1A
  • Charging voltage input: 5V-6V 1A.
  • Step-up voltage output: 5V 1A/2.1A (Dual output, Total 2.5A).
  • USB Output: 5V 2.1A / 5V 1A(Dual USB interface)
  • Charging display: intelligent digital display
  • Batteries Type: liquid lithium-ion batteries (18650)
  • Best for Arduino, DIY Kits, Power bank, etc.
  • Protection circuit: Overcharge protection: 4.250V Overcharge protection release: 4.100V.
  • Protection circuit: Over-discharge protection: 2.900V Over-discharge protection release: 3.000V.
  • Idle time before LCD switch off 60secs.
  • Screen size:27mm x 17mm
  • Dimension: 57mm x 28mm

IMAX B3 Charger

₹700.00 inc. GST
  • Input voltage: AC 110V-240V, 50~60Hz
  • Charge Current: 1.2A Max
  • Cell Cut Off Voltage: 4.2V ± 0.02V
  • Circuit Power: 11W ± 10%
  • Balance charge current: 850mA
  • Display: Green & Red LED
  • Built-in power supply
  • Case: Plastic
  • Max charge power: 10W
  • Only charge for 2~3 series LiPo battery
  • Automatic charge start
  • Simple, reliable, and safe to use
  • Dimensions: 88x57x35mm
  • Weight:103gm

IMAX B6 DIGITAL RC LIPO NiMH BATTERY BALANCE CHARGER

₹3,200.00 inc. GST
  • Input Voltage: 11V to 18V
  • Battery Voltage: 2V to 20V
  • Power Max Charge: 50W – Max
  • Discharge: 5W
  • Charge Current Range: 0.1 to 5.0A
  • Discharge Current Range: 0.1~1.0A NiMH/NiCd Cells, 1~15A LiIon/LiPoly Cells, 1~6A Pb
  • Microprocessor controlled
  • LiIon, LiPoly, and LiFe are capable
  • NiCad and NiMH are capable
  • Large range of charge currents
  • Storage charge function
  • Time limit function
  • Delta-peak sensitivity
  • Individual cell balancing
  • Battery break in and cycling.
  • Input voltage monitoring (Protects car batteries at the field)
  • Data storage (Store up to 5 packs in its memory
  • Dimensions: 133x87x33m
  • Weight 277g

IMAX B6-AC Lipo NiMH Battery Charger/Discharger 1-6 Cells

₹3,500.00 inc. GST
  • AC Input Voltage: 100V ~ 240v or 12V DC input
  • Current: 2.5A Max.
  • Max Charge: 50W
  • Max Discharge: 5W
  • Charge Current Range: 0.1A ~ 6.0A
  • Discharge Current Range: 0.1~1.0A NiMH/NiCd Cells, 1~15A LiIon/LiPoly Cells 1~6A Pb
  • Plug Type: Female End Type: IEC(To Charger)
  • Plug Type. Male End Type: EU plug (To Power Distribution Board).
  • The cables come with a fitted fuse.
  • Microprocessor controlled
  • Li-ion, LIPO, and LiFe are capable
  • Input voltage monitoring. (Protects car batteries at the field)
  • Battery break-in and cycling feature
  • Data storage (Store up to 5 packs in memory)
  • Internal resistance checker to see pack health
  • Delta-peak sensitivity
  • Individual cell balancing
  • EU Plug to IEC C13 which is used in devices such as ac adapters, digital cameras, camcorders, monitors, printers, Direct TV and more!\
  • Dimensions: 135 x 144 x 36mm
  • Weight: 632g

Lipo Battery Charger B3

₹700.00 inc. GST
  • Input voltage: AC 110V-240V, 50~60Hz
  • Charge Current: 1.2A Max
  • Cell Cut Off Voltage: 4.2V ± 0.02V
  • Circuit Power: 11W ± 10%
  • Balance charge current: 850mA
  • Display: Green & Red LED
  • Built-in power supply
  • Case: Plastic
  • Max charge power: 10W
  • Only charge for 2~3 series LiPo battery
  • Automatic charge start
  • Simple, reliable, and safe to use
  • Dimensions: 88x57x35mm
  • Weight:103gm

Solar Charge Controller 12v/24v 10A

₹975.00 inc. GST
  • Nominal Battery Voltage: 12V/24V
  • Maximum output current:10A
  • Maximum Input Power: 120W
  • Charge stage: 4
  • Adjustable voltage regulation: No
  • The regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL
  • Battery cable should be as short as possible to minimize loss

Solar Charge Controller 12v/24v 40A

₹1,300.00 inc. GST
  • High efficiency: your batteries are charged quickly.
  • Capacity for solar panel configurations of up to 3600 Wp.
  • Suitable for AGM, gel, wet and Mastervolt Lithium Ion batteries.
  • Fast and flexible setting of battery type.
  • Battery temperature sensor for long lifespan.
  • Automatic 12 V/24 V/48 V detection.
  • Switchable output.
  • Noiseless operation.
  • LCD display.
  • Fully protected against overtemperature, overload, high/low battery voltage, high/low PV voltage, short circuit and reverse polarity.

TP4056 Li-ion 5V/1A 18650 BATTERY CHARGER

₹75.00 inc. GST
  • Input interface: Micro USB
  • Input voltage: 4.5V-5.5V
  • Full charge voltage: 4.2V
  • Current: 1A adjustable
  • Charge precision: 1.5%
  • Battery over-current protection: 3 A
  • The battery Under-voltage protection: 2.5 V
  • Linear charging mode
  • Maximum charging current output: 1000 mA
  • Use mature charging chip TD4056 for simple peripheral circuits
  • Good performance & high charging accuracy
  • Dimension: 25*19*10m
  • Weight: 16gm

TP5100 4.2v 8.4v Single Double Lithium Battery Charge Management Li-ion Battery Compatible 2A Charging Board

₹400.00 inc. GST
  • Input voltage: 5-15V DC power supply.
  • Charge status: full and unloaded blue lights, charging red.
  • Double 8.4v / 4.2v lithium rechargeable single .
  • Programmable charge current. 0. 1A-2A .
  • Programmable steady precharge current 10% -100%.
  • Wide operating voltage, maximum reach I8V.
  • Red and green LED charge status indicator.
  • Chip temperature protection, overcurrent protection, under voltage protection.
  • Battery temperature protection, reverse battery shutdown, short circuit protection.
  • Switching frequency 400Khz, usable inductance 20uH and more.
  • PWR_ON Power battery for switching control.

USB Charger Doctor

₹275.00 inc. GST
  • Display data: Voltage Current
  • Operating Voltage: 3.5 to 7 V
  • Maximum Current: 3 A ( accuracy of 0.4% )
  • Battery Capacity (0-99999mah)
  • Working time (0-99Hour)
  • Charger voltage compliance DC 5V
  • Resolution : Voltage 10mV current 1mA
  • Error : voltage <± 1% current <± 2%
  • USB Plug: 13mm / 0.5"
  • RTZ, Reset button, press it three seconds will Reset
  • The working time and Capacity have a Memory function when power is off.
  • Compact and easy to carry, no additional power supply, plug, and play
  • Detect any USB charger such as PC USB, home charger, car charger
  • Easily measures the output voltage of the USB port and the device operating current or load voltage
  • Dimensions: 21mm x 53mm x 15mm
  • Weight: 16.2gm

USB for DIY charger 5V Step-Up Power Module Lithium Battery Charging Board

₹175.00 inc. GST
  • Input Voltage:3.7V~5.5V
  • Charging Current:1A(max)
  • Output Current:1A(max)
  • Output voltage:5V
  • BAT Discharging Stop Voltage: 2.9V.
  • Discharging Efficiency:85%(input 3.7V output 5V/1A).
  • Charging and discharging indication.
  • Internally installed charging and discharging power MOS.
  • Preset 4.2V charging voltage, precision ±1%.
  • Max 8uA standby current.
  • Integration charging management and discharging management.
  • Intelligent temperature control and overtemperature protection.
  • Integration output overvoltage protection, short circuit protection, overload protection.
  • Integration overcharging and over-discharging protection.
  • Support trickle mode and zero voltage charging.
  • When charging: red light flashing.
  • Fully charged: Red light glows for a long time