Showing 1–9 of 16 results

IMAX B6-AC Lipo NiMH Battery Charger/Discharger 1-6 Cells

₹3,500.00 inc. GST
  • AC Input Voltage: 100V ~ 240v or 12V DC input
  • Current: 2.5A Max.
  • Max Charge: 50W
  • Max Discharge: 5W
  • Charge Current Range: 0.1A ~ 6.0A
  • Discharge Current Range: 0.1~1.0A NiMH/NiCd Cells, 1~15A LiIon/LiPoly Cells 1~6A Pb
  • Plug Type: Female End Type: IEC(To Charger)
  • Plug Type. Male End Type: EU plug (To Power Distribution Board).
  • The cables come with a fitted fuse.
  • Microprocessor controlled
  • Li-ion, LIPO, and LiFe are capable
  • Input voltage monitoring. (Protects car batteries at the field)
  • Battery break-in and cycling feature
  • Data storage (Store up to 5 packs in memory)
  • Internal resistance checker to see pack health
  • Delta-peak sensitivity
  • Individual cell balancing
  • EU Plug to IEC C13 which is used in devices such as ac adapters, digital cameras, camcorders, monitors, printers, Direct TV and more!\
  • Dimensions: 135 x 144 x 36mm
  • Weight: 632g

IMAX B6 DIGITAL RC LIPO NiMH BATTERY BALANCE CHARGER

₹3,200.00 inc. GST
  • Input Voltage: 11V to 18V
  • Battery Voltage: 2V to 20V
  • Power Max Charge: 50W – Max
  • Discharge: 5W
  • Charge Current Range: 0.1 to 5.0A
  • Discharge Current Range: 0.1~1.0A NiMH/NiCd Cells, 1~15A LiIon/LiPoly Cells, 1~6A Pb
  • Microprocessor controlled
  • LiIon, LiPoly, and LiFe are capable
  • NiCad and NiMH are capable
  • Large range of charge currents
  • Storage charge function
  • Time limit function
  • Delta-peak sensitivity
  • Individual cell balancing
  • Battery break in and cycling.
  • Input voltage monitoring (Protects car batteries at the field)
  • Data storage (Store up to 5 packs in its memory
  • Dimensions: 133x87x33m
  • Weight 277g

Solar Charge Controller 12v/24v 40A

₹1,300.00 inc. GST
  • High efficiency: your batteries are charged quickly.
  • Capacity for solar panel configurations of up to 3600 Wp.
  • Suitable for AGM, gel, wet and Mastervolt Lithium Ion batteries.
  • Fast and flexible setting of battery type.
  • Battery temperature sensor for long lifespan.
  • Automatic 12 V/24 V/48 V detection.
  • Switchable output.
  • Noiseless operation.
  • LCD display.
  • Fully protected against overtemperature, overload, high/low battery voltage, high/low PV voltage, short circuit and reverse polarity.

Solar Charge Controller 12v/24v 10A

₹975.00 inc. GST
  • Nominal Battery Voltage: 12V/24V
  • Maximum output current:10A
  • Maximum Input Power: 120W
  • Charge stage: 4
  • Adjustable voltage regulation: No
  • The regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL
  • Battery cable should be as short as possible to minimize loss

Lipo Battery Charger B3

₹700.00 inc. GST
  • Input voltage: AC 110V-240V, 50~60Hz
  • Charge Current: 1.2A Max
  • Cell Cut Off Voltage: 4.2V ± 0.02V
  • Circuit Power: 11W ± 10%
  • Balance charge current: 850mA
  • Display: Green & Red LED
  • Built-in power supply
  • Case: Plastic
  • Max charge power: 10W
  • Only charge for 2~3 series LiPo battery
  • Automatic charge start
  • Simple, reliable, and safe to use
  • Dimensions: 88x57x35mm
  • Weight:103gm

IMAX B3 Charger

₹700.00 inc. GST
  • Input voltage: AC 110V-240V, 50~60Hz
  • Charge Current: 1.2A Max
  • Cell Cut Off Voltage: 4.2V ± 0.02V
  • Circuit Power: 11W ± 10%
  • Balance charge current: 850mA
  • Display: Green & Red LED
  • Built-in power supply
  • Case: Plastic
  • Max charge power: 10W
  • Only charge for 2~3 series LiPo battery
  • Automatic charge start
  • Simple, reliable, and safe to use
  • Dimensions: 88x57x35mm
  • Weight:103gm

12V / 2A Battery Charger

₹650.00 inc. GST
  • This is a durable product with a 6-month warranty.
  • The adapter is easy to use.
  • It comes with a long wire.
  • Wide input voltage range (100VAC-280VAC).
  • Very low no-load power consumption.
  • Very low ripple & noise output for device safety.
  • Protections against- under-over voltage/ overload/ short circuit with auto-restart on fault removal.
  • Thermal shut down (140°C) with auto-restart on cold condition.
  • Soft start & low inrush current.
  • Isolation up to 3kv for 5sec.time period.
  • High operating ambient temperature up to 60°C.
  • Highly efficient, compact, durable and long life.

TP5100 4.2v 8.4v Single Double Lithium Battery Charge Management Li-ion Battery Compatible 2A Charging Board

₹400.00 inc. GST
  • Input voltage: 5-15V DC power supply.
  • Charge status: full and unloaded blue lights, charging red.
  • Double 8.4v / 4.2v lithium rechargeable single .
  • Programmable charge current. 0. 1A-2A .
  • Programmable steady precharge current 10% -100%.
  • Wide operating voltage, maximum reach I8V.
  • Red and green LED charge status indicator.
  • Chip temperature protection, overcurrent protection, under voltage protection.
  • Battery temperature protection, reverse battery shutdown, short circuit protection.
  • Switching frequency 400Khz, usable inductance 20uH and more.
  • PWR_ON Power battery for switching control.