Showing 1–24 of 211 results

PWM DC Motor Speed Controller 20A

₹600.00 inc. GST
  • Adjustable speed range: 0%-100%.
  • Speed adjustment way: Potentiometer.
  • Output voltage: Linear under load.
  • Speed control type: Basins.
  • Output voltage: Load Linear
  • Type: Adjusting flow
  • The motor running condition adjustment: Forward /Stop / Reverse
  • Reverse polarity protection: Yes.
  • Suitable Motor: DC brush motors.

Vibration Motor

₹75.00 inc. GST
  • Speed(RPM):19000
  • Motor diameter: 6mm
  • Shaft diameter: 0.8mm
  • Shaft length: 4mm
  • Rated voltage: 1.5V-4.5V
  • Small Compact Size
  • Metal Body
  • Power: [email protected]
  • Powerful Motor

Toy Motor Small

₹95.00 inc. GST
  • Motor type: DC Toy Motor
  • Terminal: 2
  • The direction of working: Both clock and anticlockwise
  • Material: metal
  • Weight: 17 g
  • Dimension: 27.5 x 20 x 15mm

Toy Motor Small With Leaf

₹125.00 inc. GST
  • Operating Voltage: 3 to 6VDC
  • The direction of working: Both clock and anticlockwise
  • Material: metal
  • No batteries
  • Non Rechargeable
  • Width x Height: 100 mm x 100 mm
  • Weight: 17 g

Coreless Drone Motor

₹150.00 inc. GST
  • No iron losses
  • Extremely low current consumption
  • Low starting voltage
  • Low rotor inertia for extremely fast acceleration and braking
  • Extremely light and compact
  • Custom systems available from design to production
  • Very cost effective
  • Precision gearboxes available in all sizes

Toy Motor

₹20.00 inc. GST
The DC motor is a type of motor that may be utilized in a variety of DIY projects and tiny

Brushless DC Motor BLDC Motor

₹550.00 inc. GST
  • Less overall maintenance due to absence of brushes
  • Reduced size with far superior thermal characteristics
  • Higher speed range and lower electric noise generation.
  • It has no mechanical commutator and associated problems
  • High efficiency and high output power to size ratio due to the use of permanent magnet rotor
  • High speed of operation even in loaded and unloaded conditions due to the absence of brushes that limits the speed
  • Smaller motor geometry and lighter in weight than both brushed type DC and induction AC motors.
  • Long life as no inspection and maintenance is required for commutator system
  • Higher dynamic response due to low inertia and carrying windings in the stator
  • Less electromagnetic interference
  • Low noise due to absence of brushes

Toy Motor Long Shaft

₹90.00 inc. GST
  •   DC 12V
  • 13000 rpm motor
  • long shaft high speed motor
  • Suitable for toy car and other toys.
  • Good heat dissipation with cooling fan
  • Voltage: 12V.
  • No Load Current: 0.9A
  • No Load Rotate Speed: 13000r/ min. Shaft Length: 20mm/ 0.79in
  • Shaft Diameter: 3mm/ 0.12in. Size: 92mm x 37mm x 37mm/ 3.62in x 1.46in x 1.46in. Net Weight: 230g/ 8.11oz. Color: Silver

BO Motor Double Shaft 200 RPM

₹90.00 inc. GST
  • Shaft length: 7 mm Motor Design: Straight Dual Shaft
  • Shaft Diameter: 5.5 mm
  • Size: 55 x 48 x 23 mm.
  • Operating Voltage: 3 to 12V.
  • Current (without loading): 40-180mA.
  • RPM: 200 rpm.
  • Output Torque: 0.35 kg cm.
  • Cost-effectiveness of the injection-molding process.
  • Elimination of machining operations.
  • Low density: lightweight, low inertia.
  • Uniformity of parts.
  • Capability to absorb shock and vibration as a result of elastic compliance.
  • Ability to operate with minimum or no lubrication, due to inherent lubricity.
  • The relatively low coefficient of friction.
  • Corrosion-resistance; elimination of plating, or protective coatings.
  • The quietness of operation.
  • Tolerances are often less critical than for metal gears, due in part to their greater resilience.
  • Consistency with the trend to greater use of plastic housings and other components.
 

Bo Motor Double Shaft 150RPM

₹90.00 inc. GST
  • RPM: 150
  • Operating Voltage : 3V - 9V
  • Gear materials: plastic.
  • Motor types: permanent-magnet.
  • Brush-type: Brush.
  • Uncommitted motors: Homopolar motors.
  • Magnet types: ferrite magnets.
  • Torque: Approximate 2.5Kg/cm.
  • Low density: lightweight, low inertia.
  • Capability to absorb shock and vibration as a result of elastic compliance.
  • Ability to operate with minimum or no lubrication, due to inherent lubricity.
  • Relatively low coefficient of friction.
  • Corrosion-resistance; elimination of plating, or protective coatings.
  • Quietness of operation.
  • Tolerances often less critical than for metal gears, due in part to their greater resilience.
  • Consistency with trend to greater use of plastic housings and other components.

BO Motor B10

₹100.00 inc. GST
  • Shaft length: 7 mm
  • Shaft Diameter: 5.5 mm
  • Size: 55 x 48 x 23 mm.
  • Operating Voltage: 3 to 12V.
  • Current (without loading): 40-180mA.
  • Cost-effectiveness of the injection-molding process.
  • Elimination of machining operations.
  • Low density: lightweight, low inertia.
  • Uniformity of parts.
  • Capability to absorb shock and vibration as a result of elastic compliance.
  • Ability to operate with minimum or no lubrication, due to inherent lubricity.
  • The relatively low coefficient of friction.
  • Corrosion-resistance; elimination of plating, or protective coatings.
  • The quietness of operation.
  • Tolerances are often less critical than for metal gears, due in part to their greater resilience.
  • Consistency with the trend to greater use of plastic housings and other components

Coreless Motor Flat

₹95.00 inc. GST
  • Ultra-flat dimensions
  • No cogging or preferred rotor position
  • No iron losses
  • Extremely low current consumption
  • Low starting voltage
  • Low rotor inertia for extremely fast acceleration and braking
  • Extremely light and compact
  • Custom systems available from design to production
  • Very cost effective
  • Precision gearboxes available in all sizes

Mini Disc Vibrating Motor

₹75.00 inc. GST
  • Fully consealed, you does not have access to motor shaft
  • vibration motor
  • Dimension: 10mm diameter, 2.7mm thick
  • Voltage: 2V - 5V
  • 5V current draw: 100mA, 4V current draw: 80mA, 3V current draw: 60mA, 2V current draw: 40mA
  • 11000 RPM at 5V
  • Weight: 0.9 gram

Generator Motor Big

₹90.00 inc. GST
A motor-generator is a device that converts electrical energy into a different form. Frequency, voltage, and phase of electricity are

Generator Motor Small

₹90.00 inc. GST
A motor-generator is a device that converts electrical energy into a different form. Frequency, voltage, and phase of electricity are

DC Toy Motor

₹45.00 inc. GST
  • Operating Voltage: 3 to 6VDC
  • Shaft Diameter: 2 mm
  • Shaft Length: 10mm
  • Motor type: DC Toy Motor
  • Terminal: 2
  • The direction of working: Both clock and anticlockwise
  • Material: metal
  • Weight: 17 g
  • Dimension: 27.5 x 20 x 15mm

ESC 30A BLDC Electronic Speed Controller

₹650.00 inc. GST
  • Standard 30A BLDC ESC Electronic speed controller
  • Input voltage: DC 6V-16.8V(2-4S Lixx)
  • BEC: 5V 2amp
  • Easy handling and good compatibility
  • Suitable Batteries: 2-3S LiPo.
  • Application: BLDC Motors, Multirotor, RC Planes et
  • Running current: 30A (Output: Continuous 30A, Burst 40A up to 10 Secs.)
  • Size: 36* 26* 7mm
  • Weight: 32g

Bullet Connector 3.17mm

₹110.00 inc. GST
  • High-quality lightweight aluminum material
  • Suitable for RC brushless motors on planes, quadcopters, and multirotor
  • Ease of interfacing.
  • Rust-free and stain-free aluminum metal construction.

STEPPER MOTOR MINI

₹110.00 inc. GST
  • This is a high quality medium torque stepper motor.
  • Its compact size enables it to be mounted in tight spaces.
  • It has two holes for easy mounting.
  • It has a step angle of 7.5 degrees and comes with a compatible wire connector.

STEPPER MOTOR NEMA 23 7.2KG

₹1,500.00 inc. GST
  • Step Angle Step Angle: 1.8 °
  • Current: 1 A/Phase
  • Holding Torque: 72 N-cm
  • Detent torque: 3.6 N.cm (Maximum)
  • Lead Wires: 6
  • Shaft diameter: 6.35 mm (both sides)

DC 12V WATER PUMP BLACK

₹650.00 inc. GST
  • Operating Voltage : 12V
  • high-pressure output
  • used as 

SERVO MOTOR MG 995- 360 Degree

₹350.00 inc. GST
  • Servo type: Analog Servo
  • Operation Voltage : 4.8 – 7.2Volts
  • Gear Type: All Metal Gears
  • Operating temperature: -30 ~ + 60 °
  • Dead band setting: 4 microseconds
  • Rotation angle: 360°
  • Torque: 4.8V: 130.5 oz-in (9.40 kg-cm),
-6.0V: 152.8 oz-in (11.00 kg-cm)
  • Speed: 4.8V: 0.20 sec/60°, 6.0V: 0.16 sec/60°
  • Stable and shockproof double ball bearing design
  • Connection cable is thicker.
  • Equips high-quality motor.
  • High resolution
  • Accurate positioning
  • Fast control response
  • Constant torque throughout the servo travel range
  • Excellent holding power
  • Weight: 55g
  • Dimension : 40.7 × 19.7 × 42.9 mm

SERVO MOTOR SG9G

₹175.00 inc. GST
  • 3 pole ferrite, all nylon gear
  • Top ball bearing
  • Operating Voltage: 4.8V~6.0V
  • Operating speed: 0.12sec/60 degree
  • Output torque: 1.6kg/cm  4.8V
  • Dimension: 21.5 x 11.8 x 22.7mm
  • Weight: 9g

MOTOR MOUNT BRACKET for N20 MOTOR

₹50.00 inc. GST
  • Material: High ABS quality plastic
  • Height: 11mm
  • Width: 25mm