“FEETECH FS6535M 33KG High Torque Analog Servo FOR Large Scale Big RC Robot – FS6535M “
- Operating Voltage:4.8-6Volts
- Stalling torque: 27.5(kg-cm) @ 4.8V; 33(kg-cm) @ 6V.
- Stalling current: 3.8 A.
- No-load speed: 0.27±0.03(sec/60°).
- Direction: CCW.
- Operating Angle: 180degree.
- Required Pulse: 500us-2500us.
- Bearing Type: 2BB.
- Gear Type: Metal.
- Motor Type: Carbon.
- Wire length: 25cm.
- Rotation angle (standard) : CW 90±5°.
- Dimension: 65.8x30.4x57.6mm.
- Weight: 199g
100 RPM Johnson B Grade Motor
• Base Motor RPM: 18000
• Operating Voltage: 6-18 V
• Rated Voltage: 12 V
• Rated Torque: 5 kg-cm
• Stall Torque: 37.6 kg-cm
• Gearbox Dimensions: 25×37 (LxW) mm
• The motor has sturdy construction.
• Shaft equips metal bushes for long life.
• It comes with High-Quality gears.
• The shaft has a hole for better coupling
100 RPM L-Shape BO Motor
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage: 3~12 V DC
- Shaft Length: 8.5mm
- Shaft Diameter: 5.5mm (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 1 Kgcm
- Cost-effectiveness of the injection-molding process.
- Elimination of machining operations.
- Low density: lightweight, low inertia.
- Uniformity of parts.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Corrosion-resistance; elimination of plating, or protective coatings.
- The quietness of operation.
- Tolerances often less critical than for metal gears, due in part to their greater resilience.
- Consistency with the trend to greater use of plastic housings and other components.
1000 RPM – 12V CS DC Geared Motor
12V DC Geared Motor 2000 RPM
12V DC Johnson Motor Grade A-100 RPM
- 100RPM 12V DC motors with Metal Gearbox and Metal Gears
- 18000 RPM base motor
- Holding Torque: 27.18kgcm
- 6mm Dia shaft with M3 thread hole
- Gearbox diameter 37 mm.
- Motor Diameter 28.5 mm
- Length 63 mm without shaft
- Shaft length 30mm
- 180gm weight
- No-load current = 800 mA, Load current = upto 7.5 A(Max)
- The motor has sturdy construction.
- Shaft equips metal bushes for long life.
- It comes with High-Quality gears.
- The shaft has a hole for better coupling.
20A PWM Motor Speed Controller DC 6 30V 6V 12V 24V 48V
24v DC Gear, Geared Offside Motor 75 rpm High Torque
- Voltage : 18v to 30v
- RPM :75 (at 24v)
- Nominal Voltage: 24v
- No- Load Current : 35mA
- Full Load Current:800mA
- Full (Stall) Load Torque: 10kgcm
- Shaft diameter: 6 mm
- The lightweight and compact-sized motor with high performance.
- The Shaft is D type hence wheel/ coupling arrangement is simple.
- Useful for hobbyists and for a DIY project.
- Weight: 150gm
3.17mm RC Aluminum Bullet Propeller Adapter Holder
- Bore Diameter: 3.7mm (expandable up to 4.1mm).
- Material: Aluminium.
- Colour: Silver.
- Ease of interfacing.
- Rust-free and stain-free aluminum metal construction.
- Used to capture propeller with BLDC motor in quad-copter/multi-rotor/drone.
- High-quality aluminum material.
- Suitable for brushless motors and speed controllers.
- Delicate workmanship.
- High-Quality RC 3.17mm Prop Adaptor For Motor Propeller Plane, Multicopter, Quadcopter
- Dimension: 2.5mm Long x 12mm Diameter
- weight: 4g
300 RPM 12V DC CENTRE SHAFT GEAR MOTOR
350 RPM 12v DC Planetary Gear Motor – High Torque
36MM Planetary Gear Motor 100 RPM 12VDC – High Torque
- Motor Type: DC Planetary Gear Motor
- Gear Material: Metal
- Motor Length: 57mm
- Shaft Length: 20mm
- Total Length: 100mm
- Gearbox Diameter: 36mm
- Motor Diameter: 36mm
- Shaft Diameter: 8mm
- Rated Voltage: 12V
- Reduction Ratio: 1:51
- No-load Speed: 117 RPM
- No-load Current: 230mA
- Rated Load Speed : 100 RPM
- Rated Load Current : 1.5A
- Stall Torque : 32kgcm
- Stall Current: 6.5 A
- Gearbox Length -L: 55mm
- Brushed permanent magnet DC motor
- Variable speed and reversible
- Weight: 350g
36MM Planetary Gear Motor 300 RPM 12v DC – High Torque
- Motor Type: DC Planetary Gear Motor
- Gear Material: Metal
- Motor Length: 57mm
- Shaft Length: 20mm
- Total Length: 100mm
- Gearbox Diameter: 36mm
- Motor Diameter: 36mm
- Shaft Diameter: 8mm
- Weight: 350g
- Rated Voltage: 12
- Reduction Ratio: 1:19
- No-load Speed: 315 RPM
- No-load Current: 230mA
- Rated Load Speed: 280 RPM
- Rated Load Current: 1.5A
- Stall Torque : 16kgcm
- Stall Current: 6.5 A
- Gearbox Length -L: 45mm
40A DC MOTOR SPEED REGULATOR PWM CONTROLLER 2000W
- Speed controller model: 40A PWM DC motor speed regulator
- Operating voltage: 10V TO 50V
- Peak current: 40A
- Control power: 0.01-2000W
- Quiescent current: 0.025A
- PWM regulation: 5-100%
- PWM frequency: 12KHz
- Operating temperature: -20 degree to 40 degree Celsius
- Stability in working
- High efficiency
- potentiometer used for speed adjustability
- Dimension: 9*5.1mm
- Weight: 95gm
45 RPM 12V DC PLANETARY GEAR MOTOR – HIGH TORQUE
49TYD-500 Synchronous 5 RPM AC220/240V AC Motor
500 RPM CS Gear Motor
50Kg Pressure Micro Scale Weighing Sensor
- Capacity : 50.kg
- Output Sensitivity (mv/v): 1.0±0.1.
- Nonlinearity (%FS): 0.03.
- Repeatability (%FS): 0.03.
- Input Resistance: 1000. Ω
- Insulation Resistance : ≥5000.MΩ
- Alloy Steel wired weighing load cell
- High Accuracy
- Simple Structure & Easy Installation.
- Internal 1000 Ω half-bridge strain gauge load cell, the range is 50kg, half-bridge structure
- You can use multiple load sensors simultaneously to increase the capacity range, Parallel use to add additional capacity.