Showing 1–12 of 173 results

“FEETECH FS6535M 33KG High Torque Analog Servo FOR Large Scale Big RC Robot – FS6535M “

3,100.00 inc. GST
  • Operating Voltage:4.8-6Volts
  • Stalling torque: 27.5(kg-cm) @ 4.8V; 33(kg-cm) @ 6V.
  • Stalling current: 3.8 A.
  • No-load speed: 0.27±0.03(sec/60°).
  • Direction: CCW.
  • Operating Angle: 180degree.
  • Required Pulse: 500us-2500us.
  • Bearing Type: 2BB.
  • Gear Type: Metal.
  • Motor Type: Carbon.
  • Wire length: 25cm.
  • Rotation angle (standard) : CW 90±5°.
  • Dimension: 65.8x30.4x57.6mm.
  • Weight: 199g

100 RPM Johnson B Grade Motor

700.00 inc. GST
• Base Motor RPM: 18000 • Operating Voltage: 6-18 V • Rated Voltage: 12 V • Rated Torque: 5.7 kg-cm • Stall Torque: 37.6 kg-cm • Gearbox Dimensions: 25×37 (LxW) mm • The motor has sturdy construction. • Shaft equips metal bushes for long life. • It comes with High-Quality gears. • The shaft has a hole for better coupling

100 RPM L-Shape BO Motor

90.00 inc. GST
  • Low density: lightweight, low inertia.
  • Capability to absorb shock and vibration as a result of elastic compliance.
  • Ability to operate with minimum or no lubrication, due to inherent lubricity.
  • The relatively low coefficient of friction.
  • Operating Voltage: 3~12 V DC
  • Shaft Length: 8.5mm
  • Shaft Diameter: 5.5mm (Double D-type)
  • No Load Current: 40-180mA.
  • Rated Speed(After Reduction): 100 RPM
  • Rated Torque: 1 Kgcm
  • Cost-effectiveness of the injection-molding process.
  • Elimination of machining operations.
  • Low density: lightweight, low inertia.
  • Uniformity of parts.
  • Capability to absorb shock and vibration as a result of elastic compliance.
  • Ability to operate with minimum or no lubrication, due to inherent lubricity.
  • The relatively low coefficient of friction.
  • Corrosion-resistance; elimination of plating, or protective coatings.
  • The quietness of operation.
  • Tolerances often less critical than for metal gears, due in part to their greater resilience.
  • Consistency with the trend to greater use of plastic housings and other components.

1000 RPM – 12V CS DC Geared Motor

180.00 inc. GST
  • RPM: 1000.
  • Operating Voltage: 12V DC
  • Gearbox: Attached Plastic (spur)Gearbox
  • Shaft diameter: 6mm with internal hole
  • Torque: 0.5 kg-cm
  • No-load current: 60 mA(Max)
  • Load current: 300 mA(Max).
  • gearbox covered and lubricated with lithium grease
  • Requires no maintenance.

12V DC Geared Motor 2000 RPM

225.00 inc. GST
  • Torque: 2 kg cm.
  • Voltage: 12V DC.
  • Type: with Gearbox.
  • No-load current: 60 mA.
  • Load current: 300 mA.
  • Length with shaft: 75 mm.
  • Length without shaft: 57 mm.
  • Width: 38 mm.
  • Shaft diameter: 6 mm.
  • Shaft length: 22 mm.
  • Weight: 120 gram.

12V DC Johnson Motor Grade A-100 RPM

700.00 inc. GST
  • 100RPM 12V DC motors with Metal Gearbox and Metal Gears
  • 18000 RPM base motor
  • Holding Torque: 27.18kgcm
  • 6mm Dia shaft with M3 thread hole
  • Gearbox diameter 37 mm.
  • Motor Diameter 28.5 mm
  • Length 63 mm without shaft
  • Shaft length 30mm
  • 180gm weight
  • No-load current = 800 mA, Load current = upto 7.5 A(Max)
  • The motor has sturdy construction.
  • Shaft equips metal bushes for long life.
  • It comes with High-Quality gears.
  • The shaft has a hole for better coupling.

24v DC Gear, Geared Offside Motor 75 rpm High Torque

  • Voltage : 18v to 30v
  • RPM :75 (at 24v)
  • Nominal Voltage: 24v
  • No- Load Current : 35mA
  • Full Load Current:800mA
  • Full (Stall) Load Torque: 10kgcm
  • Shaft diameter: 6 mm
  • The lightweight and compact-sized motor with high performance.
  • The Shaft is D type hence wheel/ coupling arrangement is simple.
  • Useful for hobbyists and for a DIY project.
  • Weight: 150gm

28BYJ-48 5V Stepper motor

160.00 inc. GST
  • High-quality stepper motor
  • Voltage: DC 5V
  • Diameter: 25mm
  • Step Angle: 5.625 x 1/64
  • Reduction Ratio: 1/64
  • Rated voltage : 5VDC
  • Number of Phase : 4
  • Speed Variation Ratio : 1/64
  • Stride Angle : 5.625° /64
  • Frequency : 100Hz
  • DC resistance : 50Ω±7%(25℃)
  • Idle In-traction Frequency : > 600Hz
  • Idle Out-traction Frequency : > 1000Hz
  • In-traction Torque  >34.3mN.m(120Hz)
  • Self-positioning Torque >34.3mN.m
  • Friction torque : 600-1200 gf.cm
  • Pull in torque : 300 gf.cm
  • Insulated resistance >10MΩ(500V)
  • Insulated electricity power :600VAC/1mA/1s
  • Insulation grade :A
  • Rise in Temperature  <40K(120Hz
  • Noise  <35dB(120Hz,No load,10cm)

3.17mm RC Aluminum Bullet Propeller Adapter Holder

120.00 inc. GST
  • Bore Diameter: 3.7mm (expandable up to 4.1mm).
  • Material: Aluminium.
  • Colour: Silver.
  • Ease of interfacing.
  • Rust-free and stain-free aluminum metal construction.
  • Used to capture propeller with BLDC motor in quad-copter/multi-rotor/drone.
  • High-quality aluminum material.
  • Suitable for brushless motors and speed controllers.
  • Delicate workmanship.
  • High-Quality RC 3.17mm Prop Adaptor For Motor Propeller Plane, Multicopter, Quadcopter
  • Dimension: 2.5mm Long x 12mm Diameter
  • weight: 4g

3.7 G Micro Servo SG-90

150.00 inc. GST

Inclusive of all taxes

  • Servo Type : Analog Servo
  • Servo Weight: 3.7g
  • Servo Dimension: 20.0 × 17.6 × 8.0 mm
  • Voltage: 4.8 to 6.0V
  • Speed : 0.12sec/60o (no load)
  • Torque: 0.4kg. cm
  • Operating Current: 100mA
  • Quiescent current: 1mA
  • The width of the dead zone: 10u sec
  • Cable length: 165mm
  • Plug Type: JR plug
  • Temperature Range: -30 to +60 Degree C
Weight: 3.7g (less connector) Plug Type: JR plug  

300 RPM 12V DC CENTRE SHAFT GEAR MOTOR

180.00 inc. GST
  • RPM: 300.
  • Operating Voltage: 12V DC
  • Gearbox: Attached Plastic (spur)Gearbox
  • Shaft diameter: 6mm with internal hole
  • Torque: 2 kg-cm
  • No-load current: 60 mA(Max)
  • Load current: 300 mA(Max).

350 RPM 12v DC Planetary Gear Motor – High Torque

3,500.00 inc. GST
  • RPM:350
  • Rated Voltage: 12 V DC
  • No Load Current: 600 mA
  • Full Load Current:14A
  • Stall Torque :28 kg-cm
  • Number of Gear Trains: 2
  • Base Motor RPM:5000
  • Brushed permanent magnet DC motor
  • Variable speed and reversible
  • Planetary Gear Box