Showing 1–12 of 52 results

Show sidebar

28BYJ-48 5V Stepper motor

210.00 160.00
  • High-quality stepper motor
  • Voltage: DC 5V
  • Diameter: 25mm
  • Step Angle: 5.625 x 1/64
  • Reduction Ratio: 1/64
  • Rated voltage : 5VDC
  • Number of Phase : 4
  • Speed Variation Ratio : 1/64
  • Stride Angle : 5.625° /64
  • Frequency : 100Hz
  • DC resistance : 50Ω±7%(25℃)
  • Idle In-traction Frequency : > 600Hz
  • Idle Out-traction Frequency : > 1000Hz
  • In-traction Torque  >34.3mN.m(120Hz)
  • Self-positioning Torque >34.3mN.m
  • Friction torque : 600-1200 gf.cm
  • Pull in torque : 300 gf.cm
  • Insulated resistance >10MΩ(500V)
  • Insulated electricity power :600VAC/1mA/1s
  • Insulation grade :A
  • Rise in Temperature  <40K(120Hz
  • Noise  <35dB(120Hz,No load,10cm)

3.7 G Micro Servo

  • Servo Type : Analog Servo
  • Servo Weight: 3.7g
  • Servo Dimension: 20.0 × 17.6 × 8.0 mm
  • Voltage: 4.8 to 6.0V
  • Speed : 0.12sec/60o (no load)
  • Torque: 0.4kg. cm
  • Operating Current: 100mA
  • Quiescent current: 1mA
  • The width of the dead zone: 10u sec
  • Cable length: 165mm
  • Plug Type: JR plug
  • Temperature Range: -30 to +60 Degree C
Weight: 3.7g (less connector) Plug Type: JR plug

4000W 220V AC SCR Voltage Regulator Dimmer Electric Motor Speed Controller

700.00 650.00
  • Input Voltage: 220V AC.
  • Maximum Power: 4000W.
  • Voltage Regulation: AC 0-220V
  • AC frequency: 50-60Hz.
  • Rotation hole of 6mm
  • SCR Model: BT-800B
  • Dimension: : 85*60*40mm

40A DC MOTOR SPEED REGULATOR PWM CONTROLLER 2000W

  • Speed controller model: 40A PWM DC motor speed regulator
  • Operating voltage: 10V TO 50V
  • Peak current: 40A
  • Control power: 0.01-2000W
  • Quiescent current: 0.025A
  • PWM regulation: 5-100%
  • PWM frequency: 12KHz
  • Operating temperature: -20 degree to 40 degree Celsius
  • Stability in working
  • High efficiency
  • potentiometer used for speed adjustability
  • Dimension: 9*5.1mm
  • Weight: 95gm
     

48v 500W BM1418ZXF Brushless Motor

  • Rated Operating Voltage: 48V DC.
  • Rated Power: 500W.
  • Rated Speed: 2800 RPM.
  • No Load Speed: 3100 RPM.
  • Full Load Current: 13.4A.
  • No Load Current: 4.0A.
  • Rated Torque: 1.7N.m.
  • Efficiency: >75%.
  • Gear Speed: 400 RPM.
  • Gear Torque: 10N.m.
  • Gear Ratio: 6:1.

48v 500W BM1418ZXF Motor Controller

2,700.00 2,500.00
  • Rated Voltage: 48 Volt DC.
  • Rated Power: 500W.
  • Maximum Current: 30 Amps.
  • Level Brake: low.
  • Current limited: 30A±0.5A.
  • Efficiency: ≥83%.
  • Consumption: <1.5W.
  • Turn The Voltage: 1-4.2V.
  • Phase Angle: 120 degrees.
  • Includes attachments for motor, accelerator, brake, battery, battery charging, brake light, power lock

59TYD-375-2A AC Synchronous Motor 220VAC 50HZ – 1.6, 5, 12, 20, 40. RPM

  • RPM: 40.
  • Torque: 5 kgcm.
  • Voltage: 12-240 VAC.
  • Input Power: <13W
  • Max Output Torque: 68kgcm.
  • Available RPM: 5, 8, 15, 20, 30, 60.
  • Frequency: 50/60Hz.
  • Rated Current: 100mA.
  • Noise (dB): 42.
  • Insulation Class: B.
  • Direction of Rotation: CW OR CCW Controlled by Capacitor
  • Weight: 580g

59TYD-375-2B AC Synchronous Motor 220VAC 50HZ – 5 RPM

1,400.00 1,200.00
  • RPM: 30.
  • Torque: 68 kgcm.
  • Voltage: 12-240 VAC.
  • Input Power: <13W.
  • Frequency: 50/60Hz.
  • Rated Current: 100mA.
  • Noise (dB): 42.
  • Insulation Class: B.
  • Direction of Rotation: CW OR CCW Controlled by Capacitor. "
  • Main Application - beverage machine, blenders, grill, oven, office equipment, household appliances.
  • Weight:580g.

5V Step Motor 28BYJ-48-ULN2003

  • Rated voltage: 5V DC
  • Reduction Ratio: 64:1
  • Step Angle: 5.625° /64
  • Frequency: 100Hz
  • Self-positioning Torque: >34.3mN.m
  • No of phase: 4
  • Speed variation ratio: 1/64
  • Pull-in torque: 300 gf.cm
  • Friction torque: 600-1200 gf.cm
  • DC resistance: 50Ω±7% (25°C)
  • Insulated resistance: >10MΩ (500V)
  • Insulated power: 600VAC/1mA/1s
  • Rise in Temperature <40K(120Hz
  • Noise <35dB(120Hz,No load,10cm
  • Stepper motor with a standard interface, when used directly pluggable.
  • Four-phase LED indicator which indicates the status of the stepper motor work.
  • Compact size stepper motor perfect for small robotics applications.

5V-12V DC Brushless Motor Driver Board Controller

  • Type: Voltage Regulator
  • Drive voltage: DC 5-l2V
  • Work current: ≤ 1.2A
  • Speed range: from 0% to 100%
  • Phase inversion Control
  • Offers Voltage polarity protection and Overcurrent Protection
  • Suitable for hard brushless motor, brushless motor drive and other miniature 3 / 4 wire brushless motor without hall

A4988 Stepper Motor

250.00 199.00
  • Operating voltage supply: 8 V to 35 V
  • Continuous current per phase: 1 Amp
  • Maximum current per phase: 2 Amp
  • Minimum logic voltage: 3V
  • Maximum logic voltage: 5.5V
  • Microstep resolutions: Full, 1/2, 1/4, 1/8, and 1/16
  • Logic Voltage supply: 3.3 V to 5 V
  • Compatible with 3V3 and 5V microcontrollers
  • Our Board comes with 0.1 Ohm Sensor resistors
  • Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step
  • The Correct current decay mode (fast decay or slow decay) selected by chopping control
  • Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
  • Short-to-ground and shorted-load protection
  • 4-layer, 2 oz copper PCB for improved heat dissipation
  • Exposed solderable ground pad below the driver IC on the bottom of the PCB

BF-555 Gear / Geared Motor 60 RPM – High Torque

  • Rated Voltage:12v
  • RPM: 60 (at 12v)
  • Nominal Voltage: 12v
  • No- Load Current: 110 mA
  • Load Current: 450 mA
  • Stall Current: 1.8 A
  • Full (Stall) Load Torque: 30 kg cm
  • Weight: 500g Approx.