Showing 1–12 of 17 results

1.8″ TFT DISPLAY FOR ARDUINO

₹950.00 inc. GST
  • Display Size: 1.8″
  • Driver IC: ST7735
  • Input Voltage (V): 3.3 to 5
  • Pixel Resolution: 128 x 160
  • Interface Type: SPI
  • 18-bit (262,144) colour
  • 4 or 5 wire SPI digital interface
  • Built-in microSD slot – uses 2 more digital lines5V compatible!
  • Use with 3.3V or 5V logic
  • On-board 3.3V @ 150mA LDO regulator
  • 2 white LED backlight, a transistor connected so you can PWM dim the backlight
  • 1×10 header for easy breadboarding
  • 4 x 0.9″/2mm mounting holes in corners
  • Overall dimensions: 34 x 56 x 6.5mm
  • Current draw is based on LED backlight usage: with full backlight draw is ~50mA

128*64 GREEN (LCD DISPLAY MODULE)

₹650.00 inc. GST
  • Display: 128*64 dots
  • Display Type: Positive Transflective
  • Display mode: STN/yellow green
  • Viewing direction: 6 o clock
  • Power supply: +5V
  • Driving Voltage: single power
  • Driving method: 1/64 duty cycle,1/9 bias
  • Weight: 400gm
  • Dimensions: 7*7*5cm
  • NO of data lines: 8 bit parallel

16*1 CHARACTER BLUE LCD DISPLAY FOR AURDINO/RASPBERRY PI/ROBOTICS

₹200.00 inc. GST
  • Operating voltage: 5V/3V
  • 5*8 and 5*10 dot matrix possible
  • LCD power: 3 to 11 V
  • Low operation power: 2.7 to 5.5 V
  • Character size: 3.2*5.95mm
  • Dimensions: 80*36*13mm
  • 4 bit or 8-bit MPU interfaced
  • 80 eight bit display RAM
  • 208 character font(5*8 dot)
  • 32 character font(5*10 dot)
 

16*1 GREEN (LCD DISPLAY MODULE)

₹130.00 inc. GST
  • Operating voltage: 5V
  • Display format: 16 characters * 1 line
  • Display mode: STN or FSTN
  • Dot-matrix: 5*8 dots
  • Character size: 3.07 * 6.56mm
  • Character pitch: 77 * 6.56mm
  • LCD driver IC: ST7066U
  • 1/16 duty cycle
  • Polarizer mode: Transmissive
  • Each character build by 5*8 pixels
  • Works on both 8-bit parallel interface
  • Operating temperature: -20 degree to 70 degree Celsius
  • Low Current consumption
  • Alphanumeric display
  • Dimension: 80*36*13.2mm
  • Compact size and lightweight

16*2 GREEN (LCD DISPLAY MODULE)

₹160.00 inc. GST
  • Input voltage: 4.7V TO 5.3V
  • Operating voltage: 5V
  • Current consumption: 1mA
  • Input leakage current:1micro ampere
  • HD44780 Equivalent LCD Controller/driver Built-In
  • 4-bit or 8-bit MPU Interface
  • Each character build by 5*8 pixels
  • Consist of 2 rows with each row has 16 characters
  • Operating temperature:0 degree to 50 degree Celsius
  • Low Current consumption
  • Green Backlight
  • Works with almost any Microcontroller
  • Alphanumeric display
  • Compact size and lightweight
  • Easy to interface
  • Dimension: 69.5*14.5mm

16*2 ORANGE (LCD DISPLAY MODULE)

₹250.00 inc. GST
  • Input voltage: 4.7V TO 5.3V
  • Operating voltage: 5V
  • Current consumption is 1mA without backlight
  • Consist of 2 rows and each row can print 16 characters
  • Can display alphabets and numbers, i.e. alphanumeric
  • Viewing area: 99*24mm
  • Character size: 5.2*9.55mm
  • Each character build by5*8 pixels
  • Works on both 8 bit and 4 bit
  • Used in industrial applications such as audio, automotive control panels, medical devices, and home automation products, etc.
  • Operating temperature:0 degree to 50 degree Celsius
  • Storage temperature: -10 degrees to 50 degree Celsius
  • 1/16 duty cycle
     

16*2 WHITE (LCD DISPLAY MODULE)

₹225.00 inc. GST
  • Input voltage: 4.7V TO 5.3V
  • Operating voltage: 5V
  • View angle: 6 o clock
  • Current supply:1.1
  • Maximum supply current:2.5
  • 1/16 duty cycle
  • Input leakage current:1micro ampere
  • Chip on board IC
  • Rise time:200 to 250ms
  • Fall time: 300 to 350ms
  • Controller: SPLC780D
  • Each character build by 5*8 pixels
  • Consist of 2 rows with each row has 16 characters
  • Works on both 8 bit and 4 bit
  • Operating temperature:0 degree to 50 degree Celsius
  • Storage temperature: -10 degrees to 50 degree Celsius
  • Low Current consumption
  • Alphanumeric display
  • Dimension: 69.5*14.5mm
  • Compact size and lightweight
  • Easy to interface

16×2 (1602) LCD Keypad Shield

₹400.00 inc. GST
  • Operating Voltage:5V
  • 5 Push buttons.
  • RST button to reset Arduino program.
  • Integrate a potentiometer for adjusting the backlight.
  • Expanded available I/O pins.
  • Blue light with white characters.
  • Uses 4 Bit Arduino LCD Library
  • Screen contrast adjustment
  • Arduino Reset button
  • The keypad consists of 6 keys select, up, right, down, left and reset.
  • To save the digital IO pins, the keypad interface only uses one ADC channel.
  • The key value is read out through a 5 stage voltage divider.

20/4 GREEN (LCD DISPLAY MODULE)

₹499.00 inc. GST
  • Operating voltage: 5V
  • Display format: 20 characters * 4 line
  • Display mode: STN or FSTN
  • Dot-matrix: 5*8 dots
  • Character size: 2.95 * 4.75mm
  • Character pitch: 3.55 * 5.35mm
  • LCD driver IC: ST7066U
  • 1/16 duty cycle
  • Wide viewing angle and high contrast
  • Works on both 8-bit parallel interface
  • Operating temperature: -20 degree to 70 degree Celsius
  • Low Current consumption
  • Dimension: 98*60*13.6mm
  • Compact size and lightweight
 

3.2 Inch Touch Screen

₹1,200.00 inc. GST
  • Version: V4.0
  • Resistive touch.
  • Dimension: 3.2 inch.
  • Operating Voltage: DC 5V.
  • Driver: XPT2046.
  • Resolution: 240 x 320.
  • Compatible with any version of the raspberry pie
  • Drivers provided (works with your own Raspbian/Ubuntu/Kali)
  • Supports FBCP software driver as well, allows to config software resolution and set up dual-display
  • Comes with three buttons for easy application
  • Play videos (supports multi formats, MP4, and so on)
  • Take photos by touching
  • Support software keyboard (system interaction without keyboard/mouse)
  • The Raspbian system, have the following features:1. Take pictures (17 kinds of camera mode) 2. Support soft keyboard (from the mouse and keyboard can control the system) 3. Surfing the Internet
  • Dimension: 10 x 8 x 4 cm
  • Weight: 150 Grams

3D printer 128×64 Smart LCD controller for ramps 1.4

₹1,100.00 inc. GST
  • RAMPS 1.4 LCD 12864 intelligent controller.
  • With an SD card base on back.
  • Large screen display 128×64 LCD (3.2″)
  • SD card slot at the back, able to directly select a file and print
  • The product comes encoder parameter adjustment can be achieved, and the file selection print
  • Plug & play on the RAMPS, but need to modify the firmware to support.
  • LCD 12864 Smart Controller fully supported by Marlin Firmware.
  • Large screen display 128×64 LCD (3.2″)
  • SD card slot at the back, able to directly select a file and print
  • The product comes encoder parameter adjustment can be achieved, and the file selection print
  • Plug & play on the RAMPS, but need to modify the firmware to support.
  • LCD 12864 Smart Controller fully supported by Marlin Firmware.

5” TFT for Raspberry PI

₹4,500.00 inc. GST
  • Display Size: 5″
  • Resolution: 800 x 480 pixel
  • Supply Voltage: 5V @1A
  • Touch: 4-wire resistive touch
  • LCD DRIVER IC: ILI9486L
  • Refresh rate:60HZ
  • Good touch response
  • Large viewing angle
  • Fast response time
  • Support backlight control for low power consumption
  • Compatible with Raspberry Pi 3, Pi2, Model B/B+
  • Not only for Raspberry Pi
  • Not only for mini-PCs, it can also work as a computer monitor
  • The monitor can work with standard HDMI devices (adjust output resolution to 800*480),
  • Touch function is only available for Raspbian and Ubuntu systems.
  • Touch panel function not supported---Retropie, Windows 10
  • LCD Size:11mm*77.93mm
  • Weight:175g