Showing 1–12 of 26 results

ANTENNA WIFI

₹650.00 inc. GST
Antenna Specifications:
  • Color: Black
  • Radiation: Omni-directional
  • Gain:8dBi
  • Frequency Range(MHz): 2400-2500, 5150-5850MHz
  • Connector Type: RP-SMA Male (Hole)
  • Angle Adjustable: 90° 135° 180°
  • Dimension: 16cm/ 6.3”(Unbend) / 13.5cm/ 5.31”(Bend)
  • Wight: 13.5g / 0.48 oz per antenna
Pigtail Cable Specifications:
  • Color: Black & Gold
  • Length: 15cm / 5.9''
  • Wight:4.4g / 0.17 oz per pigtail cable
  • Connector Type: U.FL/ IPEX to RP-SMA Female

ESP32MOD ESP-WROOM-32 Universal Wi-Fi-BT-BLE MCU Module

₹675.00 inc. GST
  • Wi-Fi Protocols: 802.11 b/g/n
  • Wi-Fi+BT+BLE MCU Module
  • Bluetooth v4.2 BR/EDR and BLE specification
  • Wi-Fi mode Station/softAP/SoftAP+station/P2P
  • Security WPA/WPA2/WPA2-Enterprise/WPS
  • Encryption AES/RSA/ECC/SHA
  • Operating voltage: 2.2-3.6V
  • Consumption: 80 mA Typ
  • On-Chip Hall Sensor
  • Integrated Crystal of 40 MHz
  • Integrated SPI Flash of 4 MB
  • Recommended Voltage: 3.3V
  • Operating Current: Average 80 mA
  • ESP32-WROOM-32 contains two low-power Xtensa 32-bit LX6 microprocessors
  • 448 KBytes ROM for booting and core functions
  • 520 KBytes on-chip SRAM
  • 8 KBytes SRAM in RTC SLOW
  • 8 KBytes SRAM in RTC FAST
  • Dimensions: 18 mm* 25.5 * 2.8 mm

ESP8266 ESP – 01

₹175.00 inc. GST
  • 11 b/g/n
  • Wi-Fi Direct (P2P), soft-AP
  • Integrated TCP/IP protocol stack
  • Integrated TR switch, balun, LNA, power amplifier and matching network
  • Integrated PLLs, regulators, DCXO and power management units
  • +19.5dBm output power in 802.11b mode
  • Power down leakage current of <10uA
  • 1MB Flash Memory
  • Dimensions: 25 x 15 x 11 mm (LxWxH)
  • PCB Thickness: 1mm
  • Weight: 2 gm
  • SDIO 1.1 / 2.0, SPI, UART
  • STBC, 1×1 MIMO, 2×1 MIMO
  • A-MPDU & A-MSDU aggregation & 0.4ms guard interval
  • Wake up and transmit packets in < 2ms
  • Standby power consumption of < 1.0mW (DTIM3)
  • Integrated low power 32-bit CPU could be used as an application processor
  • A-MPDU & A-MSDU aggregation & 0.4ms guard interval
  • Wake up and transmit packets in < 2ms
  • Standby power consumption of < 1.0mW (DTIM3)

ESP8266 ESP – 03 WIFI Transreceiver Wireless Module

₹800.00 inc. GST
  • Communication interface voltage: 3.3V
  • Working current: 240mA(MAX)
  • 802.11 b/g/n
  • Wi-Fi Direct (P2P), soft-AP
  • Integrated TCP/IP protocol stack
  • Integrated TR switch, balun, LNA, power amplifier and matching network
  • Integrated PLLs, regulators, DCXO and power management units
  • +19.5dBm output power in 802.11b mode
  • Power down leakage current of <10uA
  • Integrated low power 32-bit CPU could be used as application processor
  • SDIO 1.1/2.0, SPI, UART
  • STBC, 1×1 MIMO, 2×1 MIMO
  • A-MPDU & A-MSDU aggregation & 0.4ms guard interval
  • Wake up and transmit packets in < 2ms
  • Standby power consumption of < 1.0mW (DTIM3)
  • SDIO 2.0, SPI, UART
  • 32-pin QFN package
  • Integrated RF switch, balun, 24dBm PA, DCXO, and PMU
  • Integrated RISC processor, on-chip memory and external memory interfaces
  • Integrated MAC/baseband processors
  • Quality of Service management
  • I2S interface for high fidelity audio applications
  • On-chip low-dropout linear regulators for all internal supplies
  • Proprietary spurious-free clock generation architecture
  • Integrated WEP, TKIP, AES, and WAPI engines

ESP8266 ESP-12E

₹175.00 inc. GST
  • LDR Light Sensor on board.
  • WS2812 Led on board.
  • Wireless Standard: IEEE 802.11 b/g/n protocol
  • Frequency Range: 2.412 - 2.484 GHz
  • Serial Transmission: 110 - 921600 bps, TCP Client 5
  • SDIO 2.0, SPI and UART Interface available
  • PWM available
  • One ADC channel is available
  • Programmable GPIO available
  • Wireless Network Type: STA / AP / STA + AP
  • Security Type: WEP / WPA-PSK / WPA2-PSK
  • Encryption Type: WEP64 / WEP128 / TKIP / AES
  • Network Protocol: IPv4, TCP / UDP / FTP / HTTP
  • Operating Voltage: 3.3V
  • Maximum current allowed to draw per pin: 15mA
  • Power down leakage current of < 10uA
  • Integrated low power 32-bit MCU
  • Onboard PCB Antenna
  • Wake up and transmit packets in < 2ms
  • Standby power consumption of < 1.0mW
  • Operating Temperature: -40ºC to +125 ºC

ESP8266 ESP-12F

₹200.00 inc. GST
  • Communication interface voltage: 3.3V
  • Working current: 240mA(MAX)
  • Serial port baud rate: 115200 (default), can be modified to other values by AT command
  • Serial communication format: 8N1
  • Wireless Network Mode: station / softAP / SoftAP + station
  • Wireless criteria: 802.11 b / g / n
  • WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
  • +19.5dBm output power
  • Compatible with ESP-12(ESP-202)
  • It is very easy to develop projects with AT commands
  • Surface Mount Package with 2mm Pitch Pads
  • Mulitple GPIO’s for all your sensor needs
  • Integrated TCP/IP protocol stac
  • Integrated TR switch, balun, LNA, power amplifier and matching network
  • Integrated PLL, regulators, DCXO and power management unit
  • Power down leakage current of <10uA
  • Integrated low power 32-bit CPU could be used as an application processor
  • SDIO 1.1/2.0, SPI, UART
  • STBC, 1×1 MIMO, 2×1 MIMO
  • A-MPDU & A-MSDU aggregation & 0.4ms guard interval
  • Wake up and transmit packets in < 2ms
  • Standby power consumption of < 1.0mW (DTIM3)
  • Both SMD and Inline package are available, and the pin pitch is 2.0mm.

ESP8266 Serial Wifi module Adapter Plate

₹150.00 inc. GST
  • PCB Colour: White
  • PCB Thickness: 1.6mm
  • It features a reserved land pattern for the 3.3V regulator
  • It has Pinouts on the top layer in black colour.
  • Compatible with Latest ESP-12F ESP8266 Wifi Module
  • It includes a 10K pull-up resistor populated on PCB.
  • Ease to an interface.
  • Ease to use.

ESP8266 Serial WIFI Witty Cloud Development Board ESP-12F Module MINI Nodemcu

₹900.00 inc. GST
  • LDR Light Sensor on board
  • WS2812 Led on board
  • 3x tactile buttons (1x in the Witty board and 2x in theCH340 board)
  • Micro USB connection for power and/or programming
  • Uses latest ESP-12F module with 4M flash and integrated antenna
  • Includes CH340G USB-to-UART programmer
  • Includes LDR (light dependent resistor a.k.a photoresistor) connected to ESP’s ADC pin
  • RGB LED connected to GPIO 12,13 and 15
  • It supports 3 modes AP, STA, AP+STA

ESP8266 WIFI Industrial stable version A full test board cloud function test Black board T5

₹1,900.00 inc. GST
  •  Support 802.11b / n / g wireless standard
  • Independent development MCU platform
  • High cost performance
  • Support UART / GPIO data communication interface
  • Support STA / AP / STA + AP coexistence mode of operation
  • Support SmartLink intelligent networking (APP)
  • Support wireless upgrade firmware
  • Support WPS network configuration
  • Built-in onboard antenna &Temperature and humidity sensor
  • RGB three-color light adjustable
  • Provide rich AT command set configuration
  • Free AiCloud cloud service for debugging
  • 3 AA batteries / 5V adapter power supply
  • Size: 61.6mm x 56.2mm;

ESP8266 WIFI Shield

₹899.00 inc. GST
  • Operating voltage 5V (supplied from the Arduino Board)
  • Connection via: 802.11b/g networks
  • Encryption types: WEP and WPA2 Personal
  • Connection with Arduino on SPI port
  • on-board micro SD slot
  • ICSP headers
  • FTDI connection for serial debugging of WiFi shield
  • Mini-USB for updating WiFi shield firmware
  • 32-bit RISC architecture
  • The processor can operate at 80MHz / 160MHz
  • 32MB flash memory
  • 64kB for instructions
  • 96kB for data
  • Operates in AP, Station or AP + Station mode
  • It has 11 digital pins
  • It has 1 analogue pin with 10-bit resolution
  • Digital pins except the D0 have interrupts, PWM, I2C and one wire
  • Programmable through USB or WiFi (OTA)
  • Compatible with Arduino IDE
  • Compatible with modules and sensors used in Arduino

ESP8266- 01 5V WIFI RELAY MODULE TOI APP CONTROLLED FOR SMART HOME AUTOMATION

₹699.00 inc. GST
  • Onboad module: ESP2866 WIFI module
  • Onboard relay: 5v.10a/250v ac, 10a/30v dc
  • Can connect 5 clients at the same time on AP mode
  • The module has two work modes: Cell phone, carry on Wi-Fi module and Cell phone and Wi-Fi module carry on the same router
  • Used in mobile phone, Wi-Fi module equipped with one router and control relay by APP
  • Maximum transmission distance of 400 m when cell phone carry on wifi module directly, in the open environment
  • Transmission distance depends on routers signal intensity when wifi and cell phone is carrying on the same router
  • IN+, IN_: 5V power input
  • TX, RX, and GND: serial port debug pins
  • Baud rate: 115200
  • Provide diode effusion protection
  • Short response time
  • Dimension: 45*28mm
         

ESP8266-12E 10A 220V NETWORK RELAY WIFI MODULE INPUT DC 7V-30V

₹1,500.00 inc. GST
  • Input voltage: DC 7V-30V
  • Relay voltage: 220V
  • Relay current: 10A
  • ISM: 2.4GHz
  • PA: +25dBm
  • Input over-voltage protection
  • Input overcurrent protection
  • ESP8266 WIFI module with 4 layered board design
  • LED indicator for input status and output status
  • 220V 10A relay, normally opened, and one normally closed
  • Optocoupler isolation input, TVS input protection
  • Access server control via HTTP protocol by TCP client mode, high current terminals
  • Dimension: 65*40*18mm