Showing all 7 results

Bluetooth XBee USB Adapter FT232RL for Arduino with Cable

₹950.00 inc. GST
  • IC Chip: FT232RL
  • Input Supply Voltage: 3.3 ~ 5 VDC
  • Connectivity: USB
  • Communication Protocol: UART, Bit Bang I/O, SPI
  • Cable Length: 30cm
  • Board Dimensions: 42x26x6mm
  • Interface: Mini-B USB, 2.54mm pitch pin header.
  • Adapter socket: XBee compatible 2.0mm pitch female pin header.
  • 3V and 5V IO compatible.
  • USB 2.0 protocol.
  • Easily connected to a PC via mini USB cable.
  • XBee-setting support software X-CTU.

HC-05 Bluetooth Bee Master BEE05

  • Power supply: 3.3V
  • A power supply of more than 3.3V will destroy the module.
  • Paring user’s name: HC-05
  • Default baud rate: 38400
  • Default slave model
  • Default pairing password: 1234
  • This module was designed for XBEE so it’s compatible with the XBEE expansion base. This module was designed for XBEE so it’s compatible with the XBEE expansion base.
  • It can be used for an MCU system whose voltage is 3.3V.
  • Users can set master-slave model, baud rate, paring password, and user’s information by AT command.
  • Bluetooth adapter pairs with Bluetooth Bee salve device.
  • With an efficient onboard antenna, the exposed antenna qualifies the transmit signal and makes it farther.
  • Dimension: : 3.3 x 2.5 x 0.9 cm
  • Weight: 5g

HC-06 RF Wireless Bluetooth Bee V2.0 Module Xbee V03 Shield Board Arduino

₹550.00 inc. GST
  • Power supply: 3.3V
  • A power supply of more than 3.3V will destroy the module.
  • Paring user’s name: HC-05
  • Default baud rate: 9600
  • Default slave model
  • Default pairing password: 1234
  • It can be used for an MCU system whose voltage is 3.3V.
  • Users can set baud rate, paring password, and user’s information by AT command.
  • Bluetooth adapter pairs with Bluetooth Bee salve device.
  • With an efficient onboard antenna, the exposed antenna qualifies the transmit signal and make it farther.
  • Be used with for Arduino Bluetooth Bee module, it can communicate with other Bluetooth device wireless
  • Be used with Xbee module to achieve communication between more than two for Arduinos or communication between for Arduino and PC
  • Dimension: : 3.3 x 2.5 x 0.9 cm
  • Weight: 5g

XBee Base Board USB Output

₹450.00 inc. GST
  • Compatible with all ZigBee modules (Series 1 and Series 2.5, standard and Pro)
  • Built-in 3V3 Voltage regulator
  • 3V and 5V dual power output
  • 3V and 5V IO compatible
  • Status LEDs ( RX, TX, RSSI, Power)
  • Zig Bee Pins available at 2.54 mm berg strip
  • USB Powered.
  • Small footprint.
  • All XBee pins are broken out.
  • Reset button.
  • USB 2.0 protocol
  • BitBang mode ready
  • Easily connected to a PC via mini USB cable
  • XBee-setting support software X-CTU

XBee Module S2C XB24CZ7WIT-004

₹1,500.00 inc. GST
  • Protocol: ZigBee®
  • Transceiver chipset: Silicon Labs EM357 SoC
  • RF Standard: 802.15.4
  • Frequency (ISM Band): 2.4GHz
  • Digital I/O: 15
  • ADC Channels: (4) 10-bit ADC inputs
  • Data Rate: RF 250 Kbps, Serial up to 1 Mbps
  • Range: Indoor 200 ft (60 m), Outdoor (LOS) 4000 ft (1200 m)
  • Transmit Power: 3.1 mW (+5 dBm)
  • Channels: 16 channels
  • Encryption: 128-bit AES
  • Voltage requirements: 2.1 to 3.6 VDC
  • Current requirements: ~33 mA @ 3.3VDC (transmit), ~28 mA @ 3.3VDC (receive), <1 uA @25ºC (sleep)
  • Migratable to Digi Mesh and ZigBee PRO protocols
  • Configuration Method: API or AT commands, local or over-the-air (OTA)
  • Communication: CMOS UART / SPI
  • Dimensions: 27.61 x 24.38 x 4.06 mm
  • Operating temperature range: -40 to +85 °C
  • Integrated, Wire Antenna
  • Interoperable with other ZigBee-compliant devices
  • Programmable versions with on-board microprocessor enable custom ZigBee application development
  • Supports binding and multicasting for easy integration into a home automation platform
  • Through-hole form factor enables flexible design

Xbee Module S2C XBP24CZ7UIT-004

₹1,175.00 inc. GST
  • Protocol: ZigBee
  • Modulation: DSSS
  • Frequency: 2.4GHz
  • Data Rate: 1Mbps
  • Power: Output 18dBm
  • Sensitivity: 101dBm
  • Serial Interfaces: SPI, UART
  • Antenna Type: Antenna Not Included, U.FL
  • Transceiver chipset: Silicon Labs EM357 SoC
  • Operating voltage: 2.7V-3.6V
  • Current Receiving: 31mA ~ 45mA
  • Current Transmitting: 120mA
  • Mounting Type Through Hole
  • Operating Temperature: -40°C ~ 85°C
 

Xbee Pro S2C Module XBP24CZ7WIT-004

₹2,500.00 inc. GST
  • Operating voltage: 2.7V-3.6V
  • Max data rate: 250kbps
  • 63mW output (+17dBm)
  • Range: 1 mile (1600m)
  • ADC Channels: 6 10-bit ADC input pins
  • Digital I/O: 8
  • 128-bit encryption
  • Transmit Current: 120mA at 3.3VDC
  • Receive current: 31mA at 3.3VDC
  • Data Rate: RF 250Kbps, serial up to 1Mbps
  • Indoor/urban range up to 300ft (90m)
  • outdoor/RF line of sight range up to 2miles (3200m)
  • Transmit power is 63mW (+18dBm)
  • Receiver sensitivity is -101dBm
  • Local or over-air configuration
  • AT or API command set
  • External Antenna Required
  • Firmware upgrades via UART, SPI or over the air (OTA)
  • ISM 2.4GHz frequency band, DSSS (direct sequence spread spectrum) interference immunity
  • Dimension: 2.438cm x 3.294cm