XH-W1401 DC12V Digital Thermostat Temperature Controller designed as a dual temperature controlled thermostat. This module is capable of controlling both heater and cooler, so the user can set it according to the applications. This module with an NTC Sensor & LED Display is an affordable 12V Temperature controller with a 7-segment display and 3 switch keypad for setting temperature and other parameters. The NTC thermistor in the module used for temperature sensing and has an accuracy of 1℃.
Meanwhile, this module also known as an incubator sensor module. Because they are widely used in egg hatching applications and also used to control temperature power in most types of electrical devices based on the temperature sensed by the NTC sensor. The sensor can display the current temperature in degrees Centigrade via 3 digits seven segment display. And the current relay state indicated by an on-board LED. Thus the NTC temperature sensor in the module used for monitoring temperature from a range of -9 to 99. And a relay provided for AC or DC load control the relay can control up to 10 amperes. The module operates at an input voltage (supply voltage) of 12 volts DC.
XH-W1401 features an inbuilt embedded micro-controller that makes programming quite simple. The various parameters in the module configured using the three switches including ON and OFF trigger temperatures. Moreover, this XH-W1401 DC12V Digital Thermostat Temperature Controller switch operates at voltages up to a maximum of 220V AC at 10A / 12V DC at 10A.