Showing 37–48 of 2263 results

1.3″ OLED Display I2C 128*64 display module Blue 4pin

₹950.00 inc. GST
  • Display colour: Yellow & Blue
  • Driver IC: SH1106
  • Factory configured for SPI protocol (can be easily changed to IIC)
  • Only Need 2 I/O Port to Control
  • Pixel Color:
  • Yellow (128×16 pixels)
  • Blue (128×48 pixels)
  • Fully Compatible with Arduino
  • Working temperature: -30°C ~ 70°C

1.44 red serial LCD display module 128*128 TFT Color Screen PCB Adapter

₹450.00 inc. GST
  • Display Size: 1.44″
  • Driver IC: ST7735
  • Input Voltage: 3.3V to 5V
  • Resolution:128×128 color pixels
  • Touch Screen: NO
  • Interface Type: SPI
  • TFT color screen, the effect is far better than other small CSTN screen
  • Fully compatible and alternative 5110 interface
  • On-board LDO, support 5V/3.3V input voltage
  • PCB Size: 44×30mm

1.5 Inch 12V DC Fan

₹70.00 inc. GST
  • Voltage: 12V
  • Size: 1.5 Inch

1.5 metre RJ45 Network Extension Cable

₹250.00 inc. GST
  • Cable Length: 1.5 meters
  • Colour: Black
  • Compatible Devices: PC, Server, Router, Printer
  • Connector Type: RJ45
  • Data Transfer Rate: 150.00 megabits_per_second

1.5nf 2000V DC Box Capacitor

₹15.00 inc. GST
  • Capacitance: 1.5nf
  • Voltage Rating: 2000V
  • Pitch: 5mm
  • Dielectric Type: Double Metallized PP
  • Capacitance Tolerance: ± 10%
  • Capacitor Case Style: Radial Box
  • Capacitor Terminals: Radial Leaded
  • Operating Temperature Min: -55°C
  • Operating Temperature Max: 105°C
  • Automotive Qualification Standard
  • High Accuracy, Long-Life Polyester Film Capacitor
  • Low Leakage
  • Easy Mounting

1.5uf 250V DC Polyester Capacitor

₹8.00 inc. GST
  • Capacitance: 1.5uf
  • Voltage Rating DC: 250 V
  • Tolerance: +/-5%
  • Mounting: THT
  • Leakage Current: 3 uA
  • Dimensions:31*6*2.5 mm
  • Operating Temperature: -40~85 C
  • Lead Spacing: 7mm
  • Lead Diameter : 0.5mm
  • Non-inductive, epoxy DIP coated, high moisture resistance.
  • The dissipation factor is normally low and it is stable against high frequency and change of temperature.
  • Recommended for high-frequency circuits like an s-curve compensating circuit.
  • High reliability because of its excellent Self-Healing performance

1.5uf 630V DC Polyester Capacitor

₹15.00 inc. GST
  • Capacitance: 1.5uf
  • Voltage Rating DC: 630 V
  • Tolerance: +/-5%
  • Mounting: THT
  • Leakage Current: 3 uA
  • Dimensions:31*6*2.5 mm
  • Operating Temperature: -40~85 C
  • Lead Spacing: 7mm
  • Lead Diameter : 0.5mm
  • Non-inductive, epoxy DIP coated, high moisture resistance.
  • The dissipation factor is normally low and it is stable against high frequency and change of temperature.
  • Recommended for high-frequency circuits like an s-curve compensating circuit.
  • High reliability because of its excellent Self-Healing performance

1.75 mm 1 KG ABS Filament for 3D printer Fluorescent Green

₹1,500.00 inc. GST
  • Material: ABS, 1.75 mm diameter
  • Weight: 1 kg/spool (2.2 lbs)
  • Length: approx. 400 m
  • Density at 21.5 °C: 1.01 g/cm3
  • Melt Flow Index at 10min, 2.16kg: 5
  • Melt Point: 225 – 240 °C
  • Heat-Deflection-Temperature at 0.455 MPa: 85 °C
  • Yield Strength at 5mm/min: 45 MPa
  • Impact Strength: 16 KJ/m2
  • Ensile Break: 30 %
  • Diameter: 1.75 ± 0.05 mm
  • Spool dimensions: 200 mm diameter x 67 mm height x 53 mm central hole
  • Compatible with any FDM 3D Printer.
  • ABS is stronger than PLA
  • Easy to post-process.
  • Environment friendly – ISO 9001 and ROHS certified

1.75mm HIPS 3D Printer Filament Black Wanhao

₹1,500.00 inc. GST
  • Colour: Black
  • Diameter: 1.75mm
  • Material: HIPS
  • Print Temperature(Degree Celsius): 230 - 270 Deg C
  • Melting Temp: 230 - 270 Deg C
  • Highly Detailed & Quality Outputs
  • Tried and Tested by Makenica.com
  • Compatible with any FDM 3D Printer.
  • HIPS is stronger than PLA High Impact Polystyrene
  • 1kg spools on black reel
  • Highly Detailed & Quality Outputs. Every time.
  • Tried and Tested by Makenica.com
  • Compatible with any FDM 3D Printer.
  • HIPS is stronger than PLA
  • Easy to post-process.

1.75mm PLA 3D Printer Filament Black Wanhao

₹1,500.00 inc. GST
  • Material: PLA
  • Diameter: 1.75 mm
  • Printing temperature: 190-225 ° C
  • Heating bed temperature: 45 ° C - 60 ° C
  • Density: 1.25 g / cm³-21.5 ° C
  • Melt Flow Index: 5 (10min, 2.16kg)
  • Shock resistance: 5 KJ / m²
  • Dimensional accuracy: 1.70 ± 0.1 mm
  • Filament weight: 1 kg
  • Spool size: approx. 200 mm diameter, 50 mm spool mount, 65 mm height
  • Diameter tolerances of ± 0.1mm checked with laser monitor
  • Smooth surface with even roundness
  • Lower melting temperature
  • Good flow properties
  • Little odor development
  • Less danger of clogging the nozzle, compared to ABS
  • Compatible with almost all 1.75mm FDM printers
  • No heating bed necessary
  • High quality means less waste
  • Easy to use
  • No heating bed necessary

1.75mm PLA 3D Printer Filament Brown Wanhao

₹1,500.00 inc. GST
  • Material: PLA
  • Diameter: 1.75 mm
  • 3D Printing Material
  • Suitable for printing artworks and crafts
  • PLA Filament
  • Easy to move the supporting material
  • Transparent colour, Eco-friendly
  • Diameter Accuracy: 1.75mm
  • Roundness Accuracy: +/- 0.5mm +/- 0.5mm
  • Density: 1.31g/cm3 1.01g/cm3
  • Melt Point: 210°C 220°C
  • Outer Diameter : 200 mm Hub Diameter : 32 mm
  • Packaging Vacuum-sealed with desiccant to protect filament from humidity
  • Extrusion Speed Tested up to 200mm/s
  • Diameter tolerances of ± 0.1mm checked with laser monitor
  • Smooth surface with even roundness
  • Lower melting temperature
  • Good flow properties
  • Little odor development
  • Less danger of clogging the nozzle, compared to ABS
  • Compatible with almost all 1.75mm FDM printers
  • No heating bed necessary
  • High quality means less waste
  • Easy to use