“21PCS 6.0mm Colorful Silicone Rubber Heat Shrink Tube
- Nominal pressure: 600 V.
- Material: Polyolefin
- Inner diameter: 6 mm
- Shrinkage factor: 2: 1 (max. shorten to 1/2 of its delivery diameter)
- Length: 45 mm
- Minimum initial shrink temperature: + 70
- Minimum full shrink temperature: + 125 ℃
- Tensile strength: 10.4 MPa
- Dielectric strength: 15 kV / mm
- Cutting method: scissors or sharp Flammability knife: hardly flammable
- 7 colors in total: yellow, blue, black, green, red, white, transparent
- Sleeve Length 0.1 m
- Sleeve Internal Diameter 4.5 mm
- Long-lasting life.
- A convenient element for a technician or hobbits is a working stand, car or van.
- Very convenient and easy to use
- Weight: 290 g
“2WD Mini Round Double-Deck Smart Robot Car Chassis DIY Kit No battery”
“FEETECH FS6535M 33KG High Torque Analog Servo FOR Large Scale Big RC Robot – FS6535M “
- Operating Voltage:4.8-6Volts
- Stalling torque: 27.5(kg-cm) @ 4.8V; 33(kg-cm) @ 6V.
- Stalling current: 3.8 A.
- No-load speed: 0.27±0.03(sec/60°).
- Direction: CCW.
- Operating Angle: 180degree.
- Required Pulse: 500us-2500us.
- Bearing Type: 2BB.
- Gear Type: Metal.
- Motor Type: Carbon.
- Wire length: 25cm.
- Rotation angle (standard) : CW 90±5°.
- Dimension: 65.8x30.4x57.6mm.
- Weight: 199g
“PWM Generator Module for Stepper Motor Driver with Forward and Reverse Function “
- Board can be used to generate PWM signals for the stepper motor driver
- Operating Voltage: 12VDC
- Three Frequency Range
- Forward and Reverse Function.
- It has three frequency ranges selectable via onboard jumpers.
- Frequency can be measured via PUL and common cathode (GND) ports.
- The board has two sets of power input
#25 Chain for 6.35mm pitch sproket – Ebike Scooter
- #25 or #25H Chain
- Length: 17.8 inch (Full Length: 35.6 inch)
- Pitch: for 6.35mm Pitch Sprockets
- Link: 141 Links
- High-quality product
- Wide variety of Applications
- Improves efficiency and extends the range of Electric Bikes
- Ensures efficient transfer of Power and prolongs Battery Life
- Note - These chains are compatible with MY1016 250W Non Geared Motor and MY1016 350W Non Geared Motor
0.015uf 630V DC Polyester Capacitor
- Capacitance: 0.015uf
- Voltage Rating DC: 630 V
- Tolerance: +/-5%
- Mounting: THT
- Leakage Current: 3 uA
- Dimensions:31*6*2.5 mm
- Operating Temperature: -40~85 C
- Lead Spacing: 7mm
- Lead Diameter : 0.5mm
- Non-inductive, epoxy DIP coated, high moisture resistance.
- The dissipation factor is normally low and it is stable against high frequency and change of temperature.
- Recommended for high-frequency circuits like an s-curve compensating circuit.
- High reliability because of its excellent Self-Healing performance.
0.01uf 1KV DC Box Capacitor
0.01uf 630V DC PPC Capacitor
- Capacitance: 0.01uf
- Voltage Rating DC: 630 V
- Tolerance: +/-10%
- Mounting: THT
- Leakage Current: 3 uA
- Dimensions:31*6*2.5 mm
- Operating Temperature: -40~85 C
- Lead Spacing: 7mm
- Lead Diameter : 0.5mm
- Non-inductive, epoxy DIP coated, high moisture resistance.
- The dissipation factor is normally low and it is stable against high frequency and change of temperature.
- Recommended for high-frequency circuits like an s-curve compensating circuit.
- High reliability because of its excellent Self-Healing performance
0.022uf 400V DC Polyester Capacitor
- Capacitance: 0.022uf
- Voltage Rating DC: 400 V
- Tolerance: +/-5%
- Mounting: THT
- Leakage Current: 3 uA
- Dimensions:31*6*2.5 mm
- Operating Temperature: -40~85 C
- Lead Spacing: 7mm
- Lead Diameter : 0.5mm
- Non-inductive, epoxy DIP coated, high moisture resistance.
- The dissipation factor is normally low and it is stable against high frequency and change of temperature.
- Recommended for high-frequency circuits like an s-curve compensating circuit.
- High reliability because of its excellent Self-Healing performance
0.1pf Disc Capacitor
0.1uf 100V DC PPC Polyester Capacitor
- Capacitance: 0.1uf
- Voltage Rating DC: 100 V
- Tolerance: +/-10%
- Mounting: THT
- Leakage Current: 3 uA
- Dimensions:31*6*2.5 mm
- Operating Temperature: -40~85 C
- Lead Spacing: 7mm
- Lead Diameter : 0.5mm
- Non-inductive, epoxy DIP coated, high moisture resistance.
- The dissipation factor is normally low and it is stable against high frequency and change of temperature.
- Recommended for high-frequency circuits like an s-curve compensating circuit.
- High reliability because of its excellent Self-Healing performance
