I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-12%
MAX 8550 SMD Rework Station , Micro Soldering Station , Hot Air Soldering & Desoldering Station
Original price was: ₹10,000.00.₹8,500.00Current price is: ₹8,500.00. inc. GST
Raspberry Pi Zero v1.3
Original price was: ₹2,100.00.₹2,006.00Current price is: ₹2,006.00. inc. GST
LCR METER MODULE
Original price was: ₹1,700.00.₹1,500.00Current price is: ₹1,500.00. inc. GST
- Working power: DC-9V
- Standby current: 0.02uA
- Operating current: 25mA
- Material: Metal+Plastic
- Conversion: 1cm=0.3937 inch, 1inch=2.54 cm
Description
The LCR-T4 12864 LCD Graphical Transistor Tester Resistance Capacitance ESR SCR Meter is an LCR-T4 12864 LCD Graphical Transistor Tester. It is powered by a 9V layer-built battery or two li-ion batteries combined to make an 8.4V battery pack for extended battery life. This tester can be used to determine the current amplification factor of bipolar transistors as well as the base-emitter threshold voltage. Using this metre, you may automatically test a component’s pin, and the results will be displayed on the 128 * 64 LCD backlight. It offers a one-button operation, automatic shutdown, and a shutdown current usage of only 20nA. Zener diode can be detected if the reverse breakdown voltage is less than 4.5V. 2uF additional capacitors can be used to test the equivalent series resistance ESR values at the same time. Darlington transistors can be identified using the base-emitter threshold voltage and high current amplification factor.
This tester can measure two resistors at the same time, and the resistor symbol is displayed. It has a decimal value of 4 and is displayed on the right. It can detect the transistor, MOSFET protection diode amplification coefficient, and the base to estimate the forward biassed voltage of the emitter transistor. NPN and PNP transistors, n-channel and p-channel MOSFETs, a diode (including a double diode), a thyristor, a transistor, a resistor, a capacitor, and other components are automatically detected.
Reviews (0)
Shipping & Delivery
Related products
10 Pieces Diamond Burr Bits Drill Kit for Engraving Carving Rotary Tool Set
- High-quality diamond-coated bur set with 3.1mm shanks
- Suitable for the hanging mill, electric mill, engraving machines, electric machinery
- Can Carve wood, plastic and other soft materials
- Can be used to various applications including carving, grinding and etching on a variety materials
- Perfect For All Sorts Off Jobs Like Model Making,
- Compatible With Other Multi-Tool Machines
- Supporting assembly mainly used to polish glass, jade, repair abrasive and other hard objects electroplated diamond grinding
- 10 pieces assortment of various shapes and sizes bits
- Come in different sizes and coarseness to satisfy any technology fit most professional electric drills,
- Best for replacing nail drill bits can be used to various applications
- High efficiency, high-quality finish, long service life, good economic returns.
- Easy to use, safe and reliable, can reduce labor intensity.
- length: approx. 6cm
- Materials: HSS
3. 5X / 12X Helping Hand Magnifier with Soldering Stand & LED Light
- Material of lens: Glass
- Lens Diameter: 2.56 inch/65mm
- Color: Black + Silver
- Useful Aid for soldering work or model makers. Ideal when a third hand is needed
- Adjustable crocodile holding clamps
- With two LED lighting, this model can work very well in the dark environment
- The bottom battery compartment is furnished with a steel plate which can enhance stability
- With three pcs of AAA batteries (not included), large capacity, this model can continuously discharge more than 10 hours, expediently be used
- Can also be used when model making, jewelry making, watch repairs and craft work
- Weld holder size: 1.18 x 3.54inch
- Base size: 3.93 x 2.56 x 0.79inch
- Weight: 6g
6pcs Hss Titanium Mane Drill Tap Combination Bit – 1/4 Hex Spiral Screw Tap
- Type: Center Drill Bit
- DIY Supplies: Woodworking
- Material: High Speed Steel
- Use: Wood Drilling,
- Shank: 1/4" (6.35mm) hex shank
- Size: 3.175mm, 3.97mm, 4.76mm, 6.35mm, 7.94mm, 9.53mm.
- Complete Hole Drilling
- Tapping And Deburring/Countersinking In One Operation With Power Drill
- Saves labour cost and time
7 mm 6 LED Endoscope Waterproof Inspection Borescope Camera 5M USB Cable
- Lens Diameter: 7.0MM
- Pixel: 0.3 megapixels
- Resolution: 640*480
- sensor size: 1/9 inch
- Frame Rate: 30fps
- View Angle: 67 degree
- Focal Distance: 3cm-10cm-
- LED Lights: 6pcs
- Interface: USB2.0
- Photo format: jpeg
- Video Format: AVI
- Waterproof level: IP67
- Support Computer: Windows XP/7/8/10/Mac
- Cable Length: 5M
- operating temperature: 0 degrees to 70 degree
- Dimension: Approx. 13.5*13.5*3cm
- Weight: 52g
Diamond Coated Core Hole Saw Drill Bit Tools for Tiles Marble Glass (5mm 6mm 8mm 10mm 12mm) – Set of 5
- Type: Core drill bit.
- Material: Nickel Plated
- Coating: Diamond
- Diy supplies: Electrical
- Perfect for Cutting Accurate Holes in Glass And Ceramics.
- Heavy-duty hole saws plated with nickel with diamond coating gives superior performance on ceramic tile and similar material.
- Sizes: 5/32", 1/4", 5/16", 3/8", 1/2"(5mm 6mm 8mm 10mm 12mm)
Titanium HSS 9-Step Cone Drill 4-12MM Hex Shank 1/4 Hole Cutter Drilling Tool
- Shank: 1/4 Hex Shank
- Comes in 4-12MM ( 4,5,6,7,8,9,10,11,12MM )sizes
- Material: HSS
- The ladder of its unique structure, a bit can open a variety of specifications of aperture.
- No need to use center punch, compared with the ordinary twist drill is not easy to be broken.
- Deburring, chamfering, elliptic hole enlargement, twist drill, the function of them was unable, but it is possible.
- The usage of tools: drill, bench drill. Work while water cooling can effectively extend the service life of drill bit
- Do not need to use center punch, compared with the ordinary twist drill is not easy to be broken.
- Deburring, chamfering, elliptic hole enlargement, twist drill, the function of them was unable, but it is possible.
- Size: Approx. 72mm
- Weight: 21g
Triangular Shank HSS Step Cone Drill Titanium Bit Hole Cutter 1 or 4 1 3 or 8 Inch
- Material: High-Speed Steel Hss Steel.
- Super-hard titanium coating lasts up to six times longer than high-speed steel
- The self-starting point starts on contact
- Titanium reduces heat for longer life
- Anti-skid tip eliminates the need for centre punching or pilot hole drilling.
- Deburring, chamfering, elliptic hole enlargement, twist drill, the function of them was unable, but it is possible
- Applicable scope: woodworking punch
- Size: 1/4 1 3/8 (1/3/1/5/3/7/1 1/1 1/1 3/8)
Reviews
There are no reviews yet.