Showing 1–12 of 15 results

“FEETECH FS6535M 33KG High Torque Analog Servo FOR Large Scale Big RC Robot – FS6535M “

3,100.00 inc. GST
  • Operating Voltage:4.8-6Volts
  • Stalling torque: 27.5(kg-cm) @ 4.8V; 33(kg-cm) @ 6V.
  • Stalling current: 3.8 A.
  • No-load speed: 0.27±0.03(sec/60°).
  • Direction: CCW.
  • Operating Angle: 180degree.
  • Required Pulse: 500us-2500us.
  • Bearing Type: 2BB.
  • Gear Type: Metal.
  • Motor Type: Carbon.
  • Wire length: 25cm.
  • Rotation angle (standard) : CW 90±5°.
  • Dimension: 65.8x30.4x57.6mm.
  • Weight: 199g

3.7 G Micro Servo SG-90

150.00 inc. GST

Inclusive of all taxes

  • Servo Type : Analog Servo
  • Servo Weight: 3.7g
  • Servo Dimension: 20.0 × 17.6 × 8.0 mm
  • Voltage: 4.8 to 6.0V
  • Speed : 0.12sec/60o (no load)
  • Torque: 0.4kg. cm
  • Operating Current: 100mA
  • Quiescent current: 1mA
  • The width of the dead zone: 10u sec
  • Cable length: 165mm
  • Plug Type: JR plug
  • Temperature Range: -30 to +60 Degree C
Weight: 3.7g (less connector) Plug Type: JR plug  

50Kg Pressure Micro Scale Weighing Sensor

200.00 inc. GST
  • Capacity : 50.kg
  • Output Sensitivity (mv/v): 1.0±0.1.
  • Nonlinearity (%FS): 0.03.
  • Repeatability (%FS): 0.03.
  • Input Resistance: 1000. Ω
  • Insulation Resistance : ≥5000.MΩ
  • Alloy Steel wired weighing load cell
  • High Accuracy
  • Simple Structure & Easy Installation.
  • Internal 1000 Ω half-bridge strain gauge load cell, the range is 50kg, half-bridge structure
  • You can use multiple load sensors simultaneously to increase the capacity range, Parallel use to add additional capacity.
 

FEETECH FT5335M 35kgcm Ultra-High-Torque, High-Voltage Digital Giant Servo

3,400.00 inc. GST
  • Digital Giant Servo
  • Ultra-high Torque, High voltage
  • Speed @ 7.4V: 0.18 sec/60°
  • Stall torque @ 7.4V: 40 kg.cm
  • Speed @ 6V: 0.20 sec/60°
  • Stall torque @ 6V: 35 kg.cm
  • Lead length: 12 inch
  • Servo horns and associated hardware are included
  • Dimension: 62.8 × 32.5 × 55.9 mm.
  • Weight: 180 g.

FEETECH FT6560M 65kg Large Scale High Torque Servo

4,800.00 inc. GST
  • Model: FT6560M.
  • Operating Speed6.0v 0.15 sec/60°.
  • Operating Speed7.4v 0.13 sec/60°.
  • Stall Torque 6.0v 48 kg.cm.
  • Stall Torque 7.4v 62 kg.cm.
  • Motor: carbon.
  • Control Way: Digital.
  • Cable Length: 20cm.
  • Gear: 5 metal gears.
  • Bearing: 2BB.
  • Dead band: 4us.
  • Working frequency: 330hz.
  • Wire/Color: JR 265 mm/ -Brown +Red S Orange.
  • Dimensions: 65.8X30.2X57.4mm.
  • Weight: 200 g.

JX PS-5521MG 20KG Large Torque Metal Gear Standrd Analog Servo

1,800.00 inc. GST
  • Name: PS-5521MG Analog Servo
  • Maximum Angle: 90°
  • Gear: Metal
  • Operating Voltage:4.8V-6V
  • Dead band: 7µs 1520µs / 50hz
  • Operating Speed (4.8V): 0.18 sec/60°
  • Operating Speed (6V): 0.16 sec/60°
  • Stall Torque (4.8V): 17.25 kg.cm (239.55oz/in)
  • Stall Torque (6V): 20.32 kg-cm (281.89 oz/in)
  • Connector Wire Length: JR 265 mm (10.43in)
  • Bearing: 2BB
  • Dimension: 40.5x40.3x20mm
  • Weight: 85g

MG995 (360 degree)

330.00 inc. GST
  • Servo type: Analog Servo
  • Operation Voltage : 4.8 – 7.2Volts
  • Gear Type: All Metal Gears
  • Operating temperature: -30 ~ + 60 °
  • Dead band setting: 4 microseconds
  • Rotation angle: 360°
  • Torque: 4.8V: 130.5 oz-in (9.40 kg-cm),
-6.0V: 152.8 oz-in (11.00 kg-cm)
  • Speed: 4.8V: 0.20 sec/60°, 6.0V: 0.16 sec/60°
  • Stable and shockproof double ball bearing design
  • Connection cable is thicker.
  • Equips high-quality motor.
  • High resolution
  • Accurate positioning
  • Fast control response
  • Constant torque throughout the servo travel range
  • Excellent holding power
  • Weight: 55g
  • Dimension : 40.7 × 19.7 × 42.9 mm

Power HD 1501MG High-Torque Metal Gears Servo 60g/ 17kg-cm

1,850.00 inc. GST
  • Motor Type: DC Motor
  • Gear Type: Copper
  • Stall Torque: 15.5 kg-cm (4.8V); 17.0 kg-cm (6V)
  • Operating Speed: 0.16sec/60degree (4.8V); 0.14sec/60degree (6.0V)
  • Temperature Range: -20℃ - +60℃
  • Working Frequency:1520μs / 50Hz
  • Servo Wire Length: 32cm
  • Current Draw at idle: 10mA
  • No Load Operating Current: 170mA
  • Stall Current: 1.2A
  • Dimension: 40.7mm X 20.5mm X 39.5mm
  • Weight: 63g

Tower Pro MG996R Servo Motor (180 Degree Rotation)

330.00 inc. GST
  • Operating voltage: 4.8 V - 7.2 V
  • Running Current: 500 mA – 900 mA (6V)
  • Stall Current: 2.5 A (6V)
  • Temperature range: 0 ºC – 55 ºC
  • Control System: Analog
  • Operating Angle: 180degree
  • Required Pulse: 900us-2100us
  • Direction: CCW
  • Operating speed: 0.17 s/60º (4.8 V), 0.14 s/60º (6 V)
  • Dead band width: 5 μs
  • Wire length: 30cm
  • Connector: 3 pin 'S' type female header
  • Weight: 55 g
  • Dimension: 40.7 x 19.7 x 42.9 mm approx.
  • Servo arms & screws included, and fit with Futaba servo arm
  • It’s universal “S” type connector that fits most receivers, including Futaba, JR, Hitec ,GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, Spektrum.
 

Towerpro MG90S Mini Digital 180 Degree Servo

359.00 inc. GST
  • Model: MG90S
  • Operating voltage: 4.8V~ 6.6V
  • Servo Plug: JR
  • Stall torque @4.8V : 1.8kg-cm
  • Stall torque @6.6V : 2.2kg-cm
  • Modulation: Analog
  • Dimensions: 23.1*12.2*29.0 mm
  • Gear Type: Metal
  • Rotation/Support: Dual Bearings
  • Rotational Range: 180°
  • Pulse Cycle: 20 ms
  • Pulse Width: 400-2400 µs
  • High resolution
  • Accurate positioning
  • Fast control response
  • Constant torque throughout the servo travel range
  • Excellent holding power
  • Weight: 13 gm

TowerPro MG995 Metal Gear Servo Motor (180° Rotation)

330.00 inc. GST
  • Operation Voltage : 4.8 - 7.2Volts
  • Gear Type: All Metal Gears
  • Operating Speed (4.8V no load): 20sec / 60 deg
  • Operating Speed (6.0V no load): 16sec / 60 deg ( no load)
  • Stall Torque (4.8V): 10kg/cm
  • Stall Torque (6.0V): 12kg/cm
  • Stable and shockproof double ball bearing design
  • Dead band width: 5 µs
  • Temperature range: 0 ºC – 55 ºC.
  • Control System: Analog
  • Operating Angle: 120degree
  • Required Pulse: 900us-2100us
  • Connection cable is thicker.
  • Equips high-quality motor.
  • High resolution
  • Accurate positioning
  • Fast control response
  • Constant torque throughout the servo travel range
  • Excellent holding power
  • Dimension : 40.7 × 19.7 × 42.9 mm
  • Weight : 55g

TowerPro MG996R 360 Deg Rotation Digital High Torque Servo Motor

350.00 inc. GST
  • Gear Type: Metal gear
  • Servo Plug: JR (Fits JR and Futaba)
  • Weight: 55g
  • Dimension: 40.7×19.7×42.9mm
  • Stall torque: 9.4kg/cm (4.8v); 11kg/cm (6.0v)
  • Operating speed: 0.19sec/60degree (4.8v); 0.15sec/60degree (6.0v)
  • Operating voltage: 4.8 ~ 6.6V
  • Gear Type: Metal gear
  • Dead band width: 1us
  • Wire length: 32cm
  • Servo arms & screws included, and fit with Futaba servo arm
  • It’s universal “S” type connector that fits most receivers, including Futaba, JR, Hitec ,GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, Spektrum.
  • CE & RoHS approved