Showing 1–12 of 204 results

Show sidebar

“21PCS 6.0mm Colorful Silicone Rubber Heat Shrink Tube Assortment in bag: 3PCS*7color(Red,yellow,blue,green,white,black,transparent)*65mm”

  • Nominal pressure: 600 V.
  • Material: Polyolefin
  • Inner diameter: 6 mm
  • Shrinkage factor: 2: 1 (max. shorten to 1/2 of its delivery diameter)
  • Length: 45 mm
  • Minimum initial shrink temperature: + 70
  • Minimum full shrink temperature: + 125 ℃
  • Tensile strength: 10.4 MPa
  • Dielectric strength: 15 kV / mm
  • Cutting method: scissors or sharp Flammability knife: hardly flammable
  • 7 colors in total: yellow, blue, black, green, red, white, transparent
  • Sleeve Length 0.1 m
  • Sleeve Internal Diameter 4.5 mm
  • Long-lasting life.
  • A convenient element for a technician or hobbits is a working stand, car or van.
  • Very convenient and easy to use
  • Weight: 290 g

“2WD Mini Round Double-Deck Smart Robot Car Chassis DIY Kit No battery”

  • The battery is not included
  • Self-assembly required
  • Without the battery.
  • Mini Size, convenient to store and carry
  • It can improve children's abilities of creativity and practice
  • Material: ABS
  • Outline Size: 150x140x80mm
  • The round acrylic plate diameter: 130mm
  • Another acrylic plate size: 135x75mm

“PWM Generator Module for Stepper Motor Driver with Forward and Reverse Function “

  • Board can be used to generate PWM signals for the stepper motor driver
  • Operating Voltage: 12VDC
  • Three Frequency Range
  • Forward and Reverse Function.
  • It has three frequency ranges selectable via onboard jumpers.
  • Frequency can be measured via PUL and common cathode (GND) ports.
  • The board has two sets of power input

#25 Chain for 6.35mm pitch sproket – Ebike Scooter

  • #25 or #25H Chain
  • Length: 17.8 inch (Full Length: 35.6 inch)
  • Pitch: for 6.35mm Pitch Sprockets
  • Link: 141 Links
  • High-quality product
  • Wide variety of Applications
  • Improves efficiency and extends the range of Electric Bikes
  • Ensures efficient transfer of Power and prolongs Battery Life
  • Note - These chains are compatible with MY1016 250W Non Geared Motor and MY1016 350W Non Geared Motor

1 Digit 7 Segment Display Common Cathode

• Available in two modes Common Cathode (CC) and Common Anode (CA) • Available in many different sizes like 9.14mm,14.20mm,20.40mm,38.10mm,57.0mm and 100mm (Commonly used/available size is 14.20mm) • Available colours: White, Blue, Red, Yellow and Green (Res is commonly used) • Low current operation • Better, brighter and larger display than conventional LCD displays. • Current consumption : 30mA / segment • Peak current : 70mA

1.3″ OLED Display I2C 128*64 display module Blue 4pin

  • Display colour: Yellow & Blue
  • Driver IC: SH1106
  • Factory configured for SPI protocol (can be easily changed to IIC)
  • Only Need 2 I/O Port to Control
  • Pixel Color:
  • Yellow (128×16 pixels)
  • Blue (128×48 pixels)
  • Fully Compatible with Arduino
  • Working temperature: -30°C ~ 70°C

1.5 metre RJ45 Network Extension Cable

Works Best for Desktop, Laptop, Router, Modem, Switch, Hub, DSL, Xbox, PS2, PS3, And More. Cat5 Patch Cable. Category 5e is an augmented specification designed to double transmission frequency to 500 MHz by wrapping Category 5 in grounded foil shielding, full 10-Gigabit Ethernet speeds can be reached without sacrificing. CAT 5e cable will support Ethernet, Fast Ethernet, and Gigabit Ethernet. CAT 5e Cable is completely backwards compatible, and can be used in any application in which you would normally use CAT 5 cable. Shielded RJ45, w/50-micron gold plated contacts. Melded boot for extra strain-relief and durability. 24AWG Stranded conductors. It is made to support 1000 Mbps "gigabit" speeds. Connectors. Both Sides): 1 x RJ-45 - Male

1.8″ TFT DISPLAY FOR ARDUINO

  • Display Size: 1.8″
  • Driver IC: ST7735
  • Input Voltage (V): 3.3 to 5
  • Pixel Resolution: 128 x 160
  • Interface Type: SPI
  • 18-bit (262,144) colour
  • 4 or 5 wire SPI digital interface
  • Built-in microSD slot – uses 2 more digital lines5V compatible!
  • Use with 3.3V or 5V logic
  • On-board 3.3V @ 150mA LDO regulator
  • 2 white LED backlight, a transistor connected so you can PWM dim the backlight
  • 1×10 header for easy breadboarding
  • 4 x 0.9″/2mm mounting holes in corners
  • Overall dimensions: 34 x 56 x 6.5mm
  • Current draw is based on LED backlight usage: with full backlight draw is ~50mA

1/4 CMOS 640*480 USB Camera with Collapsible cable for Raspberry Pi

• Interface: USB 2.0 • Sensor: 1/4 Cmos • Operating Current: <120 mA • Picture Format: VGA • Resolution: 640X480 • Supports 300k pixels, a maximum resolution of 640×480, and VGA/ YUY2 packed formats • Dimension: 40mm × 15mm × 30mm; designed for Raspberry Pi and PC • With a retractable USB cable, convenient to store • Applies USB 2.0 High-speed Sensor, plug-and-play, no driver installation • High definition and true colour images. • max pixels: 12m pixels

10 Pin RMC Connector

  • Product: RMC relimate connector pair
  • Length: 30cm
  • Cable size: 26AWG.
  • Solid and durable.
  • Pin counts: 10
  • Spacing in pins: 2.54mm
  • Safe and easy to install.
  • RoHS compliant.

10000W Original Chips Thyristor Super Power Electronic Regulator can Change Light Speed and Temperature

  • Operating Voltage: AC 220 VDC
  • Maximum Power: 10000W
  • Voltage Range: AC 0-220V (adjust temperature or light)
  • Controller Size: 95.7*56.7*53.8mm
  • Panel Size: 74.6*59.8*2.3mm
  • Cable Length: 287mm
  • New two-way high-power SCR, max current up to 80A.
  • Voltage regulator with the peak voltage absorption circuit effectively protects the high-power SCR and has a longer service life.
  • Built-in heat sink, thickened to increase the heat sink, good heat dissipation, easy to install.
  • 57A high current terminal block, simple wiring, strong button adjustment stability.
  • Omron original tact switch, Fairchild original photoelectric coupler, all metal film resistors are stable and durable.
  • The value is automatically saved. After power-on, it will automatically start to the last adjusted value.
  • Weight: 200gm
 

10000W Super Power Thyristor Electronic Voltage Regulator, Adjust Light Speed Temperature

  • Operating Voltage: AC 220 VDC
  • Maximum Power: 10000W
  • Voltage Range: AC 0-220V (adjust temperature or light)
  • Controller Size: 95.7*56.7*53.8mm
  • Panel Size: 74.6*59.8*2.3mm
  • Cable Length: 287mm
  • New two-way high-power SCR, max current up to 80A.
  • Voltage regulator with the peak voltage absorption circuit effectively protects the high-power SCR and has a longer service life.
  • Built-in heat sink, thickened to increase the heat sink, good heat dissipation, easy to install.
  • 57A high current terminal block, simple wiring, strong button adjustment stability.
  • Omron original tact switch, Fairchild original photoelectric coupler, all metal film resistors are stable and durable.
  • The value is automatically saved. After power-on, it will automatically start to the last adjusted value.
  • Weight: 200gm