Showing all 5 results

74LS540 High-Speed CMOS Logic Octal Buffer and Line Driver IC

20.00 inc. GST
  • High-Speed CMOS Logic Octal Buffer and Line Driver
  • High-level input voltage: 1.5V
  • Low-level input voltage: 1.9V
  • Low-level output voltage: 0.1V
  • Propagation delay time: 165ns
  • Supply voltage range: 4.75 to 5.25V
  • Package: DIP-20

ACS712 20A Hall Current Sensor Module SMD SOP8 SOIC8

275.00 inc. GST
  • Low-noise analog signal path
  • Device bandwidth is set via the new FILTER pin
  • 5 µs output rise time in response to step input current
  • 80 kHz bandwidth
  • Total output error 1.5% at TA= 25°C
  • Small footprint, low-profile SOIC8 package
  • 2 mΩ internal conductor resistance
  • 1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
  • 0 V, single supply operation
  • 66 to 185 mV/A output sensitivity
  • Output voltage proportional to AC or DC currents
  • Factory-trimmed for accuracy
  • Extremely stable output offset voltage
  • Nearly zero magnetic hysteresis
  • Ratiometric output from supply voltage
 

ADXL 335 Accelerometer IC

400.00 inc. GST
  • 3-axis sensing
  • Small, low profile package
  • 4 mm × 4 mm × 1.45 mm LFCSP
  • Low power : 350 μA (typical)
  • Single-supply operation: 1.8 V to 3.6 V
  • 10,000 g shock survival
  • Excellent temperature stability
  • BW adjustment with a single capacitor per axis
  • RoHS/WEEE lead-free compliant
  • 8V- 3.6V single-supply operation
  • Integrated X, Y, and Z axis accelerometer on a single chip
  • X and Y axis has a 0.5Hz to 1600Hz bandwidth
  • Z axis has a 0.5Hz to 550Hz bandwidth
  • Hermetically sealed for temp and humidity resistance

HX711–24 Bit Analog to Digital Converter (ADC)

80.00 inc. GST
  • It is an ADC converter with two differential input channels
  • An active-low noise PGA is integrated inside the chip which provides the gain of 32, 64 and 128
  • It has a power-on-reset capability which simplifies digital interface initialization.
  • All controls to the IC are made through the pins. Programming is not needed.
  • You can select a data rate of 10SPS or 80SPS at the output.
  • Provides simultaneous supply rejection of 50Hz and 60Hz supply.
  • Built-in analog power supply regulator
  • The voltage supply range is from 2.6V to 5.5V
  • The temperature range is from -40 °C to +85℃

Motor Driver IC – L293D

60.00 inc. GST
  • Can be used to run Two DC motors with the same IC.
  • Speed and Direction control is possible
  • Motor voltage Vcc2 (Vs): 4.5V to 36V
  • Maximum Peak motor current: 1.2A
  • Maximum Continuous Motor Current: 600mA
  • Supply Voltage to Vcc1(vss): 4.5V to 7V
  • Transition time: 300ns (at 5Vand 24V)
  • Automatic Thermal shutdown is available
  • Available in 16-pin DIP, TSSOP, SOIC packages
  • Featuring Unit rode L293 and L293D
  • Wide Supply-Voltage Range: 4.5 V to 36 V
  • Separate Input-Logic Supply
  • Internal ESD Protection
  • Thermal Shutdown
  • High-Noise-Immunity Inputs
  • Output Current 1 A Per Channel (600 mA for L293D)
  • Peak Output Current 2 A Per Channel (1.2 A for L293D)
  • Output Clamp Diodes for Inductive Transient Suppression