Showing 1–12 of 23 results

12V / 2A Battery Charger

650.00 inc. GST
  • This is a durable product with a 6-month warranty.
  • The adapter is easy to use.
  • It comes with a long wire.
  • Wide input voltage range (100VAC-280VAC).
  • Very low no-load power consumption.
  • Very low ripple & noise output for device safety.
  • Protections against- under-over voltage/ overload/ short circuit with auto-restart on fault removal.
  • Thermal shut down (140°C) with auto-restart on cold condition.
  • Soft start & low inrush current.
  • Isolation up to 3kv for 5sec.time period.
  • High operating ambient temperature up to 60°C.
  • Highly efficient, compact, durable and long life.

12V 18650 10A BMS Charger Li-ion Lithium Battery Protection Board Circuit Board 10.8V 11.1V 12.6V Electric

260.00 inc. GST
  • Full Charge Voltage: 12.6V to 13V
  • Over Current Protection
  • Under Voltage (Over-discharge) protection
  • Maximum Discharge Current: 8A ± 2A
  • Maximum Charging Current: 10A ± 1A
  • Short Circuit Protection
  • Quiescent Current: < 30 ±A
  • Working Temperature: -40° ~ 50° C
  • Effective life: > 30000 Hour

2 Cell Battery holder AA Black with Wire

25.00 inc. GST
  • Holds 2 AA batteries
  • With a cover and Locking
  • Comes with an ON/OFF switch
  • Cable length: 15cm
  • Internal Connection: Series
  • Material: Plastic
  • Easy install, convenient to use
  • High-quality plastic material.
  • Pre-soldered wire tips

24V Lithium Battery case 350*106*78mm

2,499.00 inc. GST
  • Dimensions: 350*106*78mm.
  • Suitable for battery type: 24V.
  • Battery standard: 18650 lithium battery.
  • Charging voltage: 24V.
  • Used to install an electric vehicle lithium battery.
  • Suitable for electric bicycles, electric bicycles and folding electric vehicles.
  • Made up of aluminium alloy and plastic, which is sturdy and durable.
  • The product has a charging socket and an output port.

36V/48V Fold bike Lithium Battery Case 410*100*42mm Aluminum Alloy Material

2,499.00 inc. GST
  • Dimensions: 410*100*42mm.
  • Suitable for battery type: 36/48V.
  • Battery standard: 18650 lithium battery.
  • Charging voltage: 42V/54.6V
  • Used to install an electric vehicle lithium battery.
  • Suitable for electric bicycles, electric bicycles, and folding electric vehicles.
  • Made up of aluminium alloy and plastic, which is sturdy and durable.
  • The product has a charging socket and an output port.

36V/48V Lithium battery case aluminum alloy material 385*110*76

2,499.00 inc. GST
  • Dimensions: 385*110*76mm.
  • Suitable for battery type: 36/48V.
  • Battery standard: 18650 lithium battery.
  • Charging voltage: 42V/54.6V.
  • Used to install an electric vehicle lithium battery.
  • Suitable for electric bicycles, electric bicycles, and folding electric vehicles.
  • Made up of aluminium alloy and plastic, which is sturdy and durable.
  • The product has a charging socket and an output port.

36V/48V Lithium Battery Case Aluminum Alloy Material 440*135*89

2,499.00 inc. GST
  • Dimensions: 440*135*89
  • Suitable for battery type: 36/48V.
  • Battery standard: 18650 lithium battery.
  • Charging voltage: 42V/54.6V.
  • Used to install an electric vehicle lithium battery.
  • Suitable for electric bicycles, electric bicycles, and folding electric vehicles.
  • Made up of aluminium alloy and plastic, which is sturdy and durable.
  • The product has a charging socket and an output port

36V/48V/60V Lithium battery case 360*160*100MM APS Plastic Material

2,499.00 inc. GST
  • Dimensions: 360*160*100mm.
  • Suitable for battery type: 36/48/60V.
  • Battery standard: 18650 lithium battery.
  • Charging voltage: 42V/54.6V.
  • Used to install an electric vehicle lithium battery.
  • Suitable for electric bicycles, electric bicycles, and folding electric vehicles.
  • Made up of plastic, which is sturdy and durable.
  • The product has a charging socket and an output port.

36V/48V/60V Lithium battery case 400*165*90mm ABS Plastic material

1,999.00 inc. GST
  • Dimensions: 400*165*90mm.
  • Suitable for battery type: 36/48/60V.
  • Battery standard: 18650 lithium battery.
  • Charging voltage: 42V/54.6V.
  • Used to install an electric vehicle lithium battery.
  • Suitable for electric bicycles, electric bicycles, and folding electric vehicles.
  • Made up of plastic, which is sturdy and durable.
  • The product has a charging socket and an output port.

7.4 Lipo Battery Indicator Display Board

200.00 inc. GST
  • High reliability, low cost and compact size.
  • LED Flash for low charge warning.
  • Memory option to recall the quantity of electricity.
  • Specifically designed to monitor the power level of the battery while charging or discharging.
  • Provides instant battery status to permit effective management of the charging.
  • Display of 4 segments LED bar graph
  • Easy to install and operate.

Dual Micro USB 3.7v to 5V 2A Power Bank DIY 18650 LiPo Charger

250.00 inc. GST
  • 4-level LED lamp display power, not working state intelligent automatic shutdown;
  • The built-in lithium battery protection IC, over-current, under-voltage protection;
  • Dual USB output ports.
  • Dimensions: 68 x 34 x 9 mm (LxWxH)
  • Weight: 10 gm
  • Input port: MicroUSB (Andro)
  • Input requirements: 5V constant voltage power supply can do charge input power, the most matching charger for 5v1a above
  • Output port: USB
  • Output parameters: 5V1A/5V2A
  • Requirements for rechargeable batteries:
  • Compatible Batteries: 18650 batteries, cell phone batteries, flat-panel batteries, MP3 batteries, etc. 3.7v-4.2V polymer Lithium battery,
 

Dual USB 5V 1A 2.1A Mobile Power Bank Battery Charger

350.00 inc. GST
  • Micro USB input: 5V 1A
  • Charging voltage input: 5V-6V 1A.
  • Step-up voltage output: 5V 1A/2.1A (Dual output, Total 2.5A).
  • USB Output: 5V 2.1A / 5V 1A(Dual USB interface)
  • Charging display: intelligent digital display
  • Batteries Type: liquid lithium-ion batteries (18650)
  • Best for Arduino, DIY Kits, Power bank, etc.
  • Protection circuit: Overcharge protection: 4.250V Overcharge protection release: 4.100V.
  • Protection circuit: Over-discharge protection: 2.900V Over-discharge protection release: 3.000V.
  • Idle time before LCD switch off 60secs.
  • Screen size:27mm x 17mm
  • Dimension: 57mm x 28mm