“FEETECH FS6535M 33KG High Torque Analog Servo FOR Large Scale Big RC Robot – FS6535M “
- Operating Voltage:4.8-6Volts
- Stalling torque: 27.5(kg-cm) @ 4.8V; 33(kg-cm) @ 6V.
- Stalling current: 3.8 A.
- No-load speed: 0.27±0.03(sec/60°).
- Direction: CCW.
- Operating Angle: 180degree.
- Required Pulse: 500us-2500us.
- Bearing Type: 2BB.
- Gear Type: Metal.
- Motor Type: Carbon.
- Wire length: 25cm.
- Rotation angle (standard) : CW 90±5°.
- Dimension: 65.8x30.4x57.6mm.
- Weight: 199g
100 RPM Johnson B Grade Motor
• Base Motor RPM: 18000
• Operating Voltage: 6-18 V
• Rated Voltage: 12 V
• Rated Torque: 5.7 kg-cm
• Stall Torque: 37.6 kg-cm
• Gearbox Dimensions: 25×37 (LxW) mm
• The motor has sturdy construction.
• Shaft equips metal bushes for long life.
• It comes with High-Quality gears.
• The shaft has a hole for better coupling
100 RPM L-Shape BO Motor
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage: 3~12 V DC
- Shaft Length: 8.5mm
- Shaft Diameter: 5.5mm (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 1 Kgcm
- Cost-effectiveness of the injection-molding process.
- Elimination of machining operations.
- Low density: lightweight, low inertia.
- Uniformity of parts.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Corrosion-resistance; elimination of plating, or protective coatings.
- The quietness of operation.
- Tolerances often less critical than for metal gears, due in part to their greater resilience.
- Consistency with the trend to greater use of plastic housings and other components.
1000 RPM – 12V CS DC Geared Motor
12V DC Johnson Motor Grade A-100 RPM
- 100RPM 12V DC motors with Metal Gearbox and Metal Gears
- 18000 RPM base motor
- Holding Torque: 27.18kgcm
- 6mm Dia shaft with M3 thread hole
- Gearbox diameter 37 mm.
- Motor Diameter 28.5 mm
- Length 63 mm without shaft
- Shaft length 30mm
- 180gm weight
- No-load current = 800 mA, Load current = upto 7.5 A(Max)
- The motor has sturdy construction.
- Shaft equips metal bushes for long life.
- It comes with High-Quality gears.
- The shaft has a hole for better coupling.
24v DC Gear, Geared Offside Motor 75 rpm High Torque
- Voltage : 18v to 30v
- RPM :75 (at 24v)
- Nominal Voltage: 24v
- No- Load Current : 35mA
- Full Load Current:800mA
- Full (Stall) Load Torque: 10kgcm
- Shaft diameter: 6 mm
- The lightweight and compact-sized motor with high performance.
- The Shaft is D type hence wheel/ coupling arrangement is simple.
- Useful for hobbyists and for a DIY project.
- Weight: 150gm
25T metal servo arm for RC Durava Tower Pro Servo
- Material: Metal
- Length: 35m
- High-quality and durable in performance.
- Suitable for MG995 MG946R MG996R MG945 S3003 RC Model Motor
- Adjustable type servo arm
- 25T Spine for Futaba and Power HD Servos
- Teeth Number: 25T
- Hard anodized finish
- Includes two steel bolts to secure the split-clamp onto the servo output
- M3 threads for your car or helicopter joints
- Dimension: 35 x 15 x 6mm
28BYJ-48 5V Stepper motor
- High-quality stepper motor
- Voltage: DC 5V
- Diameter: 25mm
- Step Angle: 5.625 x 1/64
- Reduction Ratio: 1/64
- Rated voltage ： 5VDC
- Number of Phase ： 4
- Speed Variation Ratio ： 1/64
- Stride Angle ： 5.625° /64
- Frequency : 100Hz
- DC resistance ： 50Ω±7%(25℃)
- Idle In-traction Frequency : > 600Hz
- Idle Out-traction Frequency : > 1000Hz
- In-traction Torque >34.3mN.m(120Hz)
- Self-positioning Torque >34.3mN.m
- Friction torque : 600-1200 gf.cm
- Pull in torque : 300 gf.cm
- Insulated resistance >10MΩ(500V)
- Insulated electricity power ：600VAC/1mA/1s
- Insulation grade ：A
- Rise in Temperature <40K(120Hz
- Noise <35dB(120Hz,No load,10cm)
3.17mm RC Aluminum Bullet Propeller Adapter Holder
- Bore Diameter: 3.7mm (expandable up to 4.1mm).
- Material: Aluminium.
- Colour: Silver.
- Ease of interfacing.
- Rust-free and stain-free aluminum metal construction.
- Used to capture propeller with BLDC motor in quad-copter/multi-rotor/drone.
- High-quality aluminum material.
- Suitable for brushless motors and speed controllers.
- Delicate workmanship.
- High-Quality RC 3.17mm Prop Adaptor For Motor Propeller Plane, Multicopter, Quadcopter
- Dimension: 2.5mm Long x 12mm Diameter
- weight: 4g
3.7 G Micro Servo SG-90
Inclusive of all taxes
- Servo Type : Analog Servo
- Servo Weight: 3.7g
- Servo Dimension: 20.0 × 17.6 × 8.0 mm
- Voltage: 4.8 to 6.0V
- Speed : 0.12sec/60o (no load)
- Torque: 0.4kg. cm
- Operating Current: 100mA
- Quiescent current: 1mA
- The width of the dead zone: 10u sec
- Cable length: 165mm
- Plug Type: JR plug
- Temperature Range: -30 to +60 Degree C
300 RPM 12V DC CENTRE SHAFT GEAR MOTOR
