Showing all 9 results

Show sidebar

170 POINT MINI BREADBOARD

100.00 50.00
  • Tie-points: 170 (10×17)
  • Matching jumper, diameter 0.8mm
  • Accepts 20-29 AWG wire sizes.
  • Phosphor bronze nickel plated spring clips
  • 1" hole spacing
  • 10 columns and 17 rows, with 2 sections of 5 columns separated by approximately 0.3" allowing for straddling of a DIP package over the gap
  • Ideal for high frequency and low noise circuits
  • Use to prototype and test circuit designs
  • Adhesive-backed for permanent mounting.
  • Use: experimental, testing, robot
  • Breadboard size: 46.7 * 34.8mm

7*9cm PERFBOARD

  • Dimension: 7*9 cm
  • Base Material: FR4/phenolic
  • Copper Thickness: 1-4 OZ
  • Board Thickness: 1.6mm
  • Min. Hole Size: 0.3mm
  • Min. Line Width: 6mm
  • Min. Line Spacing: 6mm
  • Edge solder pads are on 5.08 (0.2″) centers
  • weight: 25gm
  • Surface Finishing HASL, NC, and CNC for high solderibility

9*15cm PERFBOARD

  • Dimension: 9*15cm
  • Base Material: FR4/PHENOLIC
  • Copper Thickness: 1-4 OZ
  • Board Thickness: 1.6mm
  • Min. Hole Size: 0.3mm
  • Min. Line Width: 6mm
  • Min. Line Spacing: 6mm
  • Edge solder pads are on 5.08 (0.2″) centers
  • Surface Finishing HASL, NC, and CNC for high solderability

BreadBoard 400 point

80.00 60.00
  • Type: Plug-in breadboard
  • Size: 3.3 x 0.3 inches
  • Total 400 tie points
  • 2 power buses
  • 400 tie in points
  • 1" space
  • 10 rows
  • 29 x 2.15 x 0.33" (83.5 x 54.5 x 8.5mm)

General Purpose PCB 6×4

35.00 26.00
  • Dimension: 6*4inch
  • Base Material: FR4
  • Copper Thickness: 1-4 OZ
  • Board Thickness: 1.6mm
  • Clear Epoxy material
  • Oxide free copper surface
  • Pre-drilled holes for easy mounting,
  • Best size for making custom modules
  • High Quality PCB's For hobbyists and students

GL-12 840 POINT BREADBOARD

200.00 69.00
  • Quick circuit testing and mock-up
  • 840 Contact Points
  • Suitable for most IC's, Standard 0.1' Spacing
  • Positive and Negative Power Rails on Top and Bottom
  • 100% brand new and high quality
  • Solderless breadboard
  • Completely reusable and have a self-adhesive back
  • Easy component placement
  • Weight: 200 g
  • Dimensions: 165 × 55 × 10 cm

MB-102 840 POINT BREADBOARD

120.00 99.00
  • Compatible with MB-102 breadboard power supply module
  • Quick circuit testing and mock-up
  • 840 Contact Points
  • Suitable for most IC’s, Standard 0.1′ Spacing
  • Positive and Negative Power Rails on Top and Bottom
  • 100% brand new and high quality
  • Solderless breadboard
  • Completely reusable and have a self-adhesive back
  • Easy component placement
  • Weight: 200 g
  • Dimensions: 165 × 55 × 10 cm

PCB 12*18 cm

  • Dimension: 12 x 18 cm
  • Base Material: FR4
  • Copper Thickness: 1-4 OZ
  • Board Thickness: 1.6mm
  • Min. Hole Size: 0.3mm
  • Min. Line Width: 6mm
  • Min. Line Spacing: 6mm
  • Edge solder pads are on 5.08 (0.2″) centres
  • Surface Finishing HASL, NC, and CNC for high solderibility

PCB 2*3 inch

25.00 12.00
  • Size: 3 Inches * 2 Inches
  • Thickness: 1.5mm
  • PCB Type: DOT PCB
  • PCB Material: Phenolic
  • Hole Spacing: 2.54mm
  • PCB Dimension: 75*50mm
  • Weight: 25g.Perforated