10A DC-DC Step-down Adjustable Constant Voltage Module
1200w DC DC Boost Step Up Converter 8-60V to 12-83V 20A For Car Laptop Solar Battery
- Input voltage :10-60V
- Output voltage: 12-83V (adjustable)
- Output Current: 12A
- Input Current: 20A
- Constant current range: 0.3 - 20A
- Output power: = input voltage x 10A
- Working temperature: -40~+85 degrees
- Working frequency: 150KHz
- Conversion efficiency: ≤95%
- Connection mode: welding output (please use big current and pure copper wire)
- The non-isolated step-up power conversion module
- Onboard LED illuminates when the voltage is applied to the module
- Equips Multi-turn Potentiometer.
- Overcurrent protection: there is a certain range of error in the input over 30A, automatically reducing the output voltage.
- Short circuit protection: there is (input 40A fuse) double short circuit protection, use more secure.
- Has big heat sink to dissipate heat properly but can add an external fan to the module.
- Dimension (mm): 130 x 52 x 46
30W LM2587 Step-Up Voltage Module
- Input Voltage Range : 3.5V to 30V
- Output Voltage Range: 4V to 30V
- Input Maximum Current : 5A
- Power : 30W
- Efficiency : 92%
- Operating temperature: -40 ℃ – 85 ℃
- Load capacity: 80W (MAX)
- Mode of connection: Wiring terminals are free of soldering, IN is input, OUT is output.
- Suitable for 24V car or laptop power supply.
- Low ripples.
- High power.
- Module size: 37mm x 32mm x 15mm (L x W x H)
- Net weight: 31g
3V To 5V 1A USB Charger Step Up Boost Module
- Module properties: Non-isolated step-up module (BOOST).
- Input voltage: 2.5-6V.
- Output voltage: 4-12 V (Adjustable (need to replacing the resistance to adjustable), the default 5 v).
- Output current: 1000mA (Max).
- Efficiency: 92% (Max) (the higher the input voltage, the higher the efficiency).
- Switching frequency: 1MHz.
- Output ripple: 20mV (MAX).
- Operating temperature: Industrial (-40°c to +85°c).
- Voltage regulation: ±2.5%.
- Short circuit protection: None
- Input: IN + postive, IN - negative.
- Output: USB output.
- Dimension: 3 x 1.3 x 0.8cm.
5V 700mA 3.5W AC-DC Step Down Module
- Input Voltage: 220VAC
- Output Voltage: 5 VDC.
- Output Power: 3.5W.
- Output Current: 700mA
- Output overload and short circuit protection
- Ultra-thin and ultra-small size
- Supply Voltage: 220VAC
- Low ripple and low noise
- Output overload and short circuit protection
- High efficiency
- High power density
- The product is designed to meet the requirements of the EMC and Safety Test
- Low power consumption
- Environmental protection
- Meets UL and CE requirement
5V USB OUTPUT CONVERTOR 7V-24V TO 5V/3A, DC-DC STEP DOWN BUCK KIS3R33S MODULE
- Module nature: non isolated buck
- Input voltage: 7V-24V DC
- Output voltage: 5V DC
- Output current: 4A
- Conversion efficiency:96% (max)
- Switching frequency: 340KHz
- Output ripple:30mv (max)
- Load regulation: +/-0.5%
- Voltage regulation: +/-2.5%
- Operating temperature: -40 degree to +85 degree Celsius
- Rectification: nonsynchronous rectification
- Short circuit protection
- Dimensions:60*21*14mm
- Weight: 150gm
7806 6V Positive Voltage Regulator IC
- Output current up to 1A
- Output Voltage: 6V
- Line Regulation (max): 120mV
- Load Regulation (max): 120mV
- Dropout Voltage: 2V
- Output Resistance: 19mΩ
- Output Voltages of 5, 6, 8, 9, 12, 15, 18, 24
- Internal thermal overload protection
- No external components required
- Output transistor safe area protection
- Internal short circuit current limit
- Available in the aluminium TO-3 package
- Thermal Overload Protection
- Short Circuit Protection
- Output Transistor Safe Operating Area Protection
Adapter Plate 12V 2A
- Input - 100-240 VAC 50/60Hz
- Output - 12Volts 2Amp
- Excellent Quality
- ShortCircuit, Over Voltage & Over Current Protection
- Incredibly Low Fault Rates
- No Minimum Load
- This power supply is a regulated Center Positive power supply
- It's plug design is for Indian power socket so, no plug converter is required
- Compact size & light weight
- High Reliability
- Regulated Stable Voltage
- Good quality SMPS Based Adapter
- Stabilized Output, low ripple & low interference
- Single Output Voltage
- High Efficiency & low energy consumption
ADJUSTABLE POWER MODULE 12A 24V BUCK TURN 12V LED DRIVER WITH CURRENT CHARGING INDICATOR
- Input voltage: 7V to 32V
- Output voltage: 0.8V to28 V (continuously adjustable)
- Output current: 12A
- Constant current range: 0.2-12A
- Conversion efficiency: up to 95%
- Operating frequency: 300KHz
- No load current: 20 milli ampere(24V to 12V)
- Dynamic response speed: 5% 200us
- Operating temperature: -40 degree to +85 degree Celsius
- Load regulation: +/- 1% (constant pressure)
- Voltage regulation: +/-1%
- Output ripple: 20M bandwidth
- Power module: QS-2405CCBD
- Two led indicators, light red indicates charging and light green indicates fully charged
- Used in-car power supply, battery charging, low voltage systems etc.
- Short circuit protection
- Dimension: 65*47* 23.5mm
Aluminum substrate Vehicle laptop power supply 250W high power boost constant current LED boost drive
- Module properties: non-isolated boost module (BOOST).
- Input Supply voltage: DC 10 ~ 40V
- Input current: 6A (MAX)
- Static operating current: 10 mA
- Output voltage: DC 10 ~ 50 V
- Constant current range: 0.2 ~ 6
- Operating Temperature: -40 ~+85°C
- Working Frequency: 150 KHz
- Conversion efficiency: 92% ~ 96%
- Output voltage: DC 10~50V, can be continuously adjustable (default output is 19V).
- Output current: 6A MAX, when exceeds 4A, please strengthen the heat dissipation (related to input and output pressure difference, the larger the pressure difference is, the smaller the output current is).
- Output power: = 240W, for example: input 12V * 6A = 72W, input 24V * 6A = 144W, input 36V*5A=180W, input 48V*5A=240W.
- Input reverse connection protection: Yes (less than 5A).
- Mounting method: 4* 3mm screw holes.
- Connection mode: Wiring output.
DC –DC 600W 10-60V TO 12-80V BOOST CONVERTOR STEP UP MODULE POWER
- Input voltage: 12v-60v
- Output voltage: 12v-80v (adjustable)
- Input current: maximum input current 15A
- Output current: maximum output current 10A
- Output power: effective power input voltage*10A
- 600-watt high power booster module
- Operating frequency: 15KHz
- Overcurrent protection
- Minimum voltage difference: 2v
- Ultra-low dropout voltage
- Conversion efficiency: 95%
- Short circuit protection
- dimension:76*60*56mm
- weight: 250 gm
Dc 4.5V-40V to 5V 2A USB Charger DC-DC Step-Down Buck Converter Voltmeter
- Input voltage: DC 4.5 ~ 40V.
- Output voltage: 5V (when the input voltage is between 6.5V ~ 40V).
- Output current: 2A.
- The voltmeter has an automatic calibration function.
- With reverse connection protection.
- With overheat protection and short circuit protection.
- The voltmeter has an automatic calibration function.
- With reverse connection protection.
- With overheat protection and short circuit protection.
- High efficiency and low ripple.
- With USB power indicator light.