Showing 25–36 of 38 results

LM317 DC-DC STEP DOWN CONVERTOR

₹250.00 inc. GST
  • Output current: 1.5A(min), 2.2A(typical)
  • I/O voltage differential (v1-v0): 40V DC
  • Adjustable output voltage range: 1.2V-37V
  • Voltage input: 4.2V-40V
  • Switching frequency: 100 MHz
  • 80 db ripple rejection
  • Input method: VIN input is positive, GND input negative
  • Output method: VOUT output positive, GND output negative
  • Operating temperature: 0 degrees to 125 degree Celsius
  • Dimension: 35.6*16.8mm

Mini 360 STEP DOWN BUCK CONVERTER POWER MODULE

₹115.00 inc. GST
  • MPS MP2307DN buck regulator IC
  • Design Non-isolated buck
  • Rectification: synchronous rectification
  • Input voltage: 4.75V-23V
  • Output voltage: 1.0V-17V
  • Output current Peak: 3A, continuous 1.8A
  • Conversion efficiency: 96%
  • Switching frequency: 340KHz
  • Built-in 160°C thermal shutdown
  • Output ripple: 30mV (no load)
  • Load regulation: ± 0.5%
  • Voltage regulation: ± 2.5%
  • Operating temperature: -40 ° C to + 85 ° C
  • Dimensions: 17 * 11 * 3.8mm

MP1584EN MINI 3A DC-DC CONVERTOR

₹150.00 inc. GST
  • Input voltage: 4.5V-28V
  • Output voltage: 0.8V-20V
  • Output current: rated 3A maximum
  • Switching frequency: 1MHz
  • Output ripple: less than 30mV
  • Efficiency: 96%
  • Operating temperature: -40 degree to 85 degree Celsius
  • Accuracy: +/-0.5%
  • Internal soft-start
  • Ceramic capacitor stable
  • Internally set current limit without current sensing resistor
  • Dimension:22*17*4mm
 

MT3608 2A MAX DC-DC STEP UP POWER MODULE BOOSTER

₹150.00 inc. GST
  • Input voltage: 2V-24V
  • Output voltage: 5V-28V
  • Output current: 2A
  • Efficiency: 96%
  • Fixed switching frequency: 1.2MHz
  • Integrated 80mohm power MOSFET
  • Internal compensation
  • Automatics pulse frequency modulation mode
  • Operating temperature: -40 degree to 90 degree Celsius
  • Low-cost converter module
  • Simple to adjust to get desired increase I voltage
  • Can source a good amount of current
  • Dimension: 37*17*7mm
  • Weight: 4gm

QC3.0 QC2.0 USB DC-DC Buck Converter Charging Step Down Module 6-32V

  • Input voltage: 6V-32V.
  • Output voltage: default 5V, automatically adjust between 3-12V after triggering fast charge.
  • Output power: up to 24W (5V/3.4A, 9V/2.5A, 12V/2A, etc.).
  • Output voltage cable compensation function.
  • Conversion efficiency: 90%-97%.
  • Support multiple fast-charging protocols.
  • Input overvoltage and under-voltage protection.
  • Input overcurrent protection.
  • Output overcurrent, short circuit protection.
  • Machine over temperature protection.
  • Support fast charge agreement
  • Support DCP protocol, BC1.2.
  • Support Huawei Fast Charge Protocol FCP/SCP.
  • Support Huawei Fast Charge Protocol AFC.
  • Support Spreadtrum Fast Charge Protocol SFCP.
  • Support QC2.0 and 3.0.
  • Support MTK PE1.1/PE2.0

QC3.0 QC2.0 USB DC-DC Buck Converter Charging Step Down Module Fast Quick Charger Circuit Board

  • Input voltage: 6V-32V.
  • Output voltage: default 5V, automatically adjust between 3-12V after triggering fast charge.
  • Output power: up to 24W (5V/3.4A, 9V/2.5A, 12V/2A, etc.).
  • Output voltage cable compensation function.
  • Conversion efficiency: 90%-97%.
  • Support multiple fast-charging protocols.
  • Input overvoltage and under-voltage protection.
  • Input overcurrent protection.
  • Output overcurrent, short circuit protection.
  • Machine over temperature protection.
  • Support fast charge agreement
  • Support DCP protocol, BC1.2.
  • Support Huawei Fast Charge Protocol FCP/SCP.
  • Support Huawei Fast Charge Protocol AFC.
  • Support Spreadtrum Fast Charge Protocol SFCP.
  • Support QC2.0 and 3.0.
  • Support MTK PE1.1/PE2.0

QC3.0 QC2.0 USB DC-DC Buck Converter Step Down Module Fast Quick Charger Circuit Board

  • Input voltage: 6V-32V.
  • Output voltage: default 5V, automatically adjust between 3-12V after triggering fast charge.
  • Output power: up to 24W (5V/3.4A, 9V/2.5A, 12V/2A, etc.).
  • Output voltage cable compensation function.
  • Conversion efficiency: 90%-97%.
  • Support multiple fast-charging protocols.
  • Input overvoltage and under-voltage protection.
  • Input overcurrent protection.
  • Output overcurrent, short circuit protection.
  • Machine over temperature protection.
  • Support fast charge agreement
  • Support DCP protocol, BC1.2.
  • Support Huawei Fast Charge Protocol FCP/SCP.
  • Support Huawei Fast Charge Protocol AFC.
  • Support Spreadtrum Fast Charge Protocol SFCP.
  • Support QC2.0 and 3.0.
  • Support MTK PE1.1/PE2.0

XL4015 5A STEP DOWN WITH DISPLAY

₹500.00 inc. GST
  • Module nature: non-isolated buck module ( BUCK )
  • Input voltage: 4-38V
  • Output voltage: 1.25-36V
  • Output current: 0-5A, it is recommended to use within 4.5A
  • 14 Digital I/O Pins
  • Output power: It is recommended to use within 75W, please add a heat sink if it exceeds 50W
  • Working temperature: -40 degree to + 85 degrees
  • Working frequency: 180KHz
  • Conversion efficiency: up to 96% Load adjustment rate: S ( I ) ≤ 0.8%
  • Voltage adjustment rate: S ( u ) ≤ 0.8%
  • LED to indicate power status
  • Short circuit protection
  • Over-temperature protection
  • Dimension: 54mm * 23mm wide *18mm

XL4015 5A STEP DOWN MODULE

₹450.00 inc. GST
  • Module nature: non-isolated buck module ( BUCK )
  • Input voltage: 4-38V
  • Output voltage: 1.25-36V
  • Output current: 0-5A, it is recommended to use within 4.5A
  • 14 Digital I/O Pins
  • Output power: It is recommended to use within 75W, please add a heat sink if it exceeds 50W
  • Working temperature: -40 ~ + 85 degrees
  • Working frequency: 180KHz
  • Conversion efficiency: up to 96% Load adjustment rate: S ( I ) ≤ 0.8%
  • Voltage adjustment rate: S ( u ) ≤ 0.8%
  • Power indicator: No
  • Short circuit protection
  • Over-temperature protection
  • Dimension: 54mm * 23mm wide *18mm

XL4015 5A STEP DOWN WITH HEAT SINK

₹250.00 inc. GST
  • Module nature: non-isolated buck module ( BUCK )
  • Input voltage: 4-38V
  • Output voltage: 1.25-36V
  • Output current: 0-5A, it is recommended to use within 4.5A
  • 14 Digital I/O Pins
  • Output power: It is recommended to use within 75W, please add a heat sink if it exceeds 50W
  • Working temperature: -40 degree + 85 degrees
  • Working frequency: 180KHz
  • Conversion efficiency: up to 96% Load adjustment rate: S ( I ) ≤ 0.8%
  • Voltage adjustment rate: S ( u ) ≤ 0.8%
  • Power indicator
  • Short circuit protection
  • Over-temperature protection
  • Dimension: 54mm * 23mm wide *18mm