Showing 1–12 of 69 results

Show sidebar

20mm LDR

98.00 48.00
  • Diameter: 25mm
  •  No. of Pins: 2
  •  Type of Mounting: PCB Through Hole
  •  Maximum Operating Temperature: +800C (Approx.)
  •  Dark resistance:1-20M ohm
  • Good reliability
  • High sensitivity
  • Fast response
  • Good spectrum characteristic
  • Size: 20mm (50-paise size)
  • .Coated with epoxy
  • Miniature open frame package.
  • Proxy coated.
  • Moisture resistant.
  • Spectral response is similar to the human eye.

250 Volts Float Switch Sensor for Water Level Controller

500.00 450.00
  • Protection: Waterproof
  • Medium Working Pressure: Max 1 Bar
  • Circuit Breaking Capacity: Directly KW with 250V
  • Medium Temperature: 70 Deg.C.
  • Mechanical endurance: ≥100,000 times
  • Electrical endurance: ≥500,000 times
  • Cable length: 3m
  • Corrosion Free,
  • Sturdy and durable & need no maintenance.
  • No current / voltage is passed through water, therefore no electrolysis or Salt deposition.
  • Long life (approximate 10 million operations)
  • Rust proof (entire sensor body in polypropylene)
  • Used in hard water or fuel such as diesel, kerosene, oil etc.
  • Dimensions : 11 x 9 x 5cms
  • Weight 690 grams

50Kg Pressure Micro Scale Weighing Sensor

400.00 200.00
  • Capacity : 50.kg
  • Output Sensitivity (mv/v): 1.0±0.1.
  • Nonlinearity (%FS): 0.03.
  • Repeatability (%FS): 0.03.
  • Input Resistance: 1000. Ω
  • Insulation Resistance : ≥5000.MΩ
  • Alloy Steel wired weighing load cell
  • High Accuracy
  • Simple Structure & Easy Installation.
  • Internal 1000 Ω half-bridge strain gauge load cell, the range is 50kg, half-bridge structure
  • You can use multiple load sensors simultaneously to increase the capacity range, Parallel use to add additional capacity.
 

5mm LDR

30.00 7.00
  •  Diameter: 5mm
  •  No. of Pins: 2
  •  Type of Mounting: PCB Through Hole
  •  Maximum Operating Temperature: +800C (Approx.)
  •  Dark resistance:1-20M ohm
  • Good reliability
  • High sensitivity
  • Fast response
  • Good spectrum characteristic
  • Size: 20mm (50-paise size)
  • .Coated with epoxy
  • Miniature open frame package.
  • Proxy coated.
  • Moisture resistant.
  • Spectral response is similar to the human eye.

8mm LDR

65.00 15.00
  • Diameter: 8mm
  •  No. of Pins: 2
  •  Type of Mounting: PCB Through Hole
  •  Maximum Operating Temperature: +800C (Approx.)
  •  Dark resistance:1-20M ohm
  • Good reliability
  • High sensitivity
  • Fast response
  • Good spectrum characteristic
  • Size: 20mm (50-paise size)
  • .Coated with epoxy
  • Miniature open frame package.
  • Proxy coated.
  • Moisture resistant.
  • Spectral response is similar to the human eye.

Air Pressure Sensor MPX 10

850.00 800.00
  • Pressure Type: Differential Sensitivity
  • Operating Pressure Min: 0kPa
  • Operating Pressure Max: 0-10kPa
  • Minimum Supply Voltage: 3V
  • Maximum Supply Voltage: 6V
  • of Pins: 4Pins
  • Operating Temperature Min: -40°C
  • Operating Temperature Max: 125°C
  • Low Cost
  • Patented Silicon Shear Stress-Strain Gauge Design
  • Ratiometric to Supply Voltage
  • Easy to Use Chip Carrier Package Options
  • Differential and Gauge Options
  • Durable Epoxy Unibody Element or Thermoplastic
  • (PPS) Surface Mount Package

Anti-Corrosion Water Level Sensor with Ball Float Switch

300.00 230.00
  • Rating Contract (Max.): 10 W
  • Switching Power Supply (Max.): 110VDC
  • Pulse current (Max.): 0.5A
  • Breakdown Voltage (Max.): 220VDC
  • Current (Max.): 1A
  • Resistance Contract (Max.): 100 Ω
  • Operating Temperature: -10 to 60degree C
  • Cable length: 40cm
  • Shipment Weight: 0.02 kg
  • Float Ball Size : 24×17mm
  • Body Total Length: 85mm
  • Total Float opening: 70°
  • Float Switch ON/OFF angle: Approx. between 15° to 20°

Automatic Day Night Dusk to Dawn Light Sensor Switch LDR Control 5A 230V AC

250.00 200.00
  • Input supply: 230V AC
  • Output supply: 230V AC
  • Operating frequency: 50Hz
  • Power rating: 400W

Brass G1/4″ BSP Hall Effect Flow Sensor Water 0.35-3.0L/min OD12 WaterTurbine Flowmeter SEN-HZ41WC

  • Water quality requirement: Drinking water health standards, 0-80℃.
  • Flow range: 0.35 -0 Liter/min.
  • Withstand hydraulic pressure: ≤1.75 MPa.
  • Operating voltage: DC 4.5 - 18 Volt
  • Operating current: ≤15mA.
  • Insulation resistance: >100MΩ.
  • Electrical strength: AC500V, 50HZ.
  • Output level: Rated voltage DC5V, high level ≥4.5 Volt, low level ≤0.5 Volt.
  • Pulse duty cycle: 50%.
  • Flow characteristic: F=73Q, F: HZ, Q: L/min,±10%.
  • Cumulative flow conversion: 1 Litre water=1780 pulse, accuracy: 8%.

DHT11 Sensor

200.00 150.00
  • Operating Voltage: 3.5V to 5.5V
  • Operating current: 0.3mA (measuring) 60uA (standby)
  • Output: Serial data
  • Temperature Range: 0°C to 50°C
  • Humidity Range: 20% to 90%
  • Resolution: Temperature and Humidity both are 16-bit
  • Accuracy: ±1°C and ±1%

DN40 – 1.5” Water Flow Sensor

  • Model: YF-DN40
  • Material: Plastic
  • Function: Sensor, flow rate control
  • Working Voltage: DC 5V~24V
  • Thread size: BSP 1 1/2”
  • Size:L 92x OD46 5"
  • Colour: Black color
  • Flow rate: 5~200L/min
  • Flow Pulse: F(Hz)=(0.45xQ) +/-3%    Q=L/min
  • 1L water= 27Pulse
  • Working Current: 15mA (DC5 V)
  • Working Voltage: DC 4.5V
  • Load Capacity: =10 mA (DC 5 V)
  • Operating Working  Temperature : -25 to +80 Degree C
  • Liquid Temperature: 85
  • Accuracy: 3~5%
  • Working environment: water, liquid, light oil etc.
  • Hydrostatic pressure> 1.75MPa meet
  • Insulation resistance> 100M> 100M
  • Accuracy in 1 ~ 120L / MIN ± 2% in line
  • Flow pulse characteristics F = (0.45 * Q) Q = L / Min meet
  • Weight: 146g
 

DS1820 Temperature Sensor

200.00 150.00
  • Unique 1–Wire interface requires only one port pin for communication
  • Multidrop capability simplifies distributed temperature sensing applications
  • Requires no external components
  • Can be powered from data line
  • Zero standby power required
  • Measures temperatures from –55° C to +125° C in 0.5° C increments.
  • Temperature is read as a 9–bit digital value.
  • Converts temperature to digital word in 200 ms (typ.)
  • User–definable, nonvolatile temperature alarm settings
  • Alarm search command identifies and addresses devices whose temperature is outside of programmed limits (temperature alarm condition)