I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-12%
3.7V 950mAh Battery
Original price was: ₹300.00.₹250.00Current price is: ₹250.00. inc. GST
74LS89 Integrated Circuit
Original price was: ₹200.00.₹150.00Current price is: ₹150.00. inc. GST
BAKU 1501T Regulated DC Power Supply
Original price was: ₹2,500.00.₹2,200.00Current price is: ₹2,200.00. inc. GST
Related products
3V To 5V 1A USB Charger Step Up Boost Module
- Module properties: Non-isolated step-up module (BOOST).
- Input voltage: 2.5-6V.
- Output voltage: 4-12 V (Adjustable (need to replacing the resistance to adjustable), the default 5 v).
- Output current: 1000mA (Max).
- Efficiency: 92% (Max) (the higher the input voltage, the higher the efficiency).
- Switching frequency: 1MHz.
- Output ripple: 20mV (MAX).
- Operating temperature: Industrial (-40°c to +85°c).
- Voltage regulation: ±2.5%.
- Short circuit protection: None
- Input: IN + postive, IN - negative.
- Output: USB output.
- Dimension: 3 x 1.3 x 0.8cm.
5V 700mA 3.5W AC-DC Step Down Module
- Input Voltage: 220VAC
- Output Voltage: 5 VDC.
- Output Power: 3.5W.
- Output Current: 700mA
- Output overload and short circuit protection
- Ultra-thin and ultra-small size
- Supply Voltage: 220VAC
- Low ripple and low noise
- Output overload and short circuit protection
- High efficiency
- High power density
- The product is designed to meet the requirements of the EMC and Safety Test
- Low power consumption
- Environmental protection
- Meets UL and CE requirement
ADJUSTABLE POWER MODULE 12A 24V BUCK TURN 12V LED DRIVER WITH CURRENT CHARGING INDICATOR
- Input voltage: 7V to 32V
- Output voltage: 0.8V to28 V (continuously adjustable)
- Output current: 12A
- Constant current range: 0.2-12A
- Conversion efficiency: up to 95%
- Operating frequency: 300KHz
- No load current: 20 milli ampere(24V to 12V)
- Dynamic response speed: 5% 200us
- Operating temperature: -40 degree to +85 degree Celsius
- Load regulation: +/- 1% (constant pressure)
- Voltage regulation: +/-1%
- Output ripple: 20M bandwidth
- Power module: QS-2405CCBD
- Two led indicators, light red indicates charging and light green indicates fully charged
- Used in-car power supply, battery charging, low voltage systems etc.
- Short circuit protection
- Dimension: 65*47* 23.5mm
DP50V5A Constant Voltage current Step-down Programmable Power Supply Module
• Model: DP50V5A.
• Input voltage range: 6V to 55 V.
• Output voltage range: 0.00 to 50 V.
• Output current: 0.000-5.000A.
• Output power range: 00.00-250.0W.
• Open size: 71mm x 39mm.
• Output voltage resolution: 0.01V.
• Output current resolution: 0.001A.
• Output Voltage accuracy: ± (0.5% + 1 digits).
• Output Current accuracy: ± (0.5% + 2 digit).
• Dimension: 79 x 43 x 48mm
• Weight: 78g.
LM317 DC-DC STEP DOWN CONVERTOR
- Output current: 1.5A(min), 2.2A(typical)
- I/O voltage differential (v1-v0): 40V DC
- Adjustable output voltage range: 1.2V-37V
- Voltage input: 4.2V-40V
- Switching frequency: 100 MHz
- 80 db ripple rejection
- Input method: VIN input is positive, GND input negative
- Output method: VOUT output positive, GND output negative
- Operating temperature: 0 degrees to 125 degree Celsius
- Dimension: 35.6*16.8mm
MT3608 2A MAX DC-DC STEP UP POWER MODULE BOOSTER
- Input voltage: 2V-24V
- Output voltage: 5V-28V
- Output current: 2A
- Efficiency: 96%
- Fixed switching frequency: 1.2MHz
- Integrated 80mohm power MOSFET
- Internal compensation
- Automatics pulse frequency modulation mode
- Operating temperature: -40 degree to 90 degree Celsius
- Low-cost converter module
- Simple to adjust to get desired increase I voltage
- Can source a good amount of current
- Dimension: 37*17*7mm
- Weight: 4gm
QC3.0 QC2.0 USB DC-DC Buck Converter Step Down Module Fast Quick Charger Circuit Board
- Input voltage: 6V-32V.
- Output voltage: default 5V, automatically adjust between 3-12V after triggering fast charge.
- Output power: up to 24W (5V/3.4A, 9V/2.5A, 12V/2A, etc.).
- Output voltage cable compensation function.
- Conversion efficiency: 90%-97%.
- Support multiple fast-charging protocols.
- Input overvoltage and under-voltage protection.
- Input overcurrent protection.
- Output overcurrent, short circuit protection.
- Machine over temperature protection.
- Support fast charge agreement
- Support DCP protocol, BC1.2.
- Support Huawei Fast Charge Protocol FCP/SCP.
- Support Huawei Fast Charge Protocol AFC.
- Support Spreadtrum Fast Charge Protocol SFCP.
- Support QC2.0 and 3.0.
- Support MTK PE1.1/PE2.0
XL4015 5A STEP DOWN WITH HEAT SINK
- Module nature: non-isolated buck module ( BUCK )
- Input voltage: 4-38V
- Output voltage: 1.25-36V
- Output current: 0-5A, it is recommended to use within 4.5A
- 14 Digital I/O Pins
- Output power: It is recommended to use within 75W, please add a heat sink if it exceeds 50W
- Working temperature: -40 degree + 85 degrees
- Working frequency: 180KHz
- Conversion efficiency: up to 96% Load adjustment rate: S ( I ) ≤ 0.8%
- Voltage adjustment rate: S ( u ) ≤ 0.8%
- Power indicator
- Short circuit protection
- Over-temperature protection
- Dimension: 54mm * 23mm wide *18mm
Reviews
There are no reviews yet.