I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
8 Channel Tracking Sensor Module Board Trace Module Infrared Detection
₹500.00 Original price was: ₹500.00.₹400.00Current price is: ₹400.00. inc. GST
- Operating voltage: 5.0 V.
- Supply current: 100 mA.
- Output format: 8 Analog and Digital voltages.
- Output voltage range: 0 V to supplied voltage.
- Optimal sensing distance: 0.125? (3 mm).
- Applications Line Follower Robots Object Array Sensing
Out of stock
The IR Sensor Array of 8 consists of 8 IR LED/phototransistor pairs mounted on a 0.375″ pitch. These sensors are a great detector for line-following robots and grid navigation robots. All the LED s in the module are connected in series to halve the current consumption. And an IC allows the LEDs to turn off for additional sensing or power-savings options. Each sensor generates separate digital I/O as well as Analog Output also.
The module was designed as a perfect carrier for eight IR emitter and receiver (photoresistor/photodiodes) pairs evenly spaced at a distance of 15mm intervals. Thus used as a general-purpose proximity IR or reflectance sensor. Â Each sensor senses digital output and can sense the presence of a line indicated with a 5V logic output. On reading the digital state of the eight sensors, the user can not only detect the line but also determine how far the centre of the robot is from the line. When all sensors sense the line, the robot is at an intersection
Each phototransistor equipped with a pull-up resistor in the module forms a voltage divider and produces an analogue voltage output between 0 to 5V as the function of the reflectance sensor. The lower the output voltage greater will be the reflection. Even though all the LED s are paired, the output is independent of each other. The LEDs in the module are controlled by MOSFET with a gate normally pulled high. This allows LEDs to turn off by setting the MOSFET gate at low voltage. An onboard potentiometer in the sensor allows adjusting the sensitivity of the individual sensors. It will be advantageous if we turn OFF the LED for limiting power consumption when the sensors are not in use or for varying the effective brightness of the LEDs through PWM control.

Related products
10D OF 9-AXIS GY-87
- Power supply: DC 3.3V TO 5V
- 3 Axis Gyro+ Acceleration+ Magnetic field
- Air pressure module
- Inbuilt ultra-low noise linear LDO voltage regulator
- Inbuilt onboard filters. which reduce noise from motor and another high current
- Communication: I2C protocol
- Power LED
- Designed for 5V logic
- Can easily select two I2C addresses for MPU6050 by soldered jumper
- Dimension: 2.2*1.7cm
- Size: 6gm
3.3V/5V MB102 Breadboard Power Supply Module
- Input voltage: 6.5V to 12V
- Output voltage: 3.3V to 5V
- Output current: 700Ma
- Apply to MB102 breadboard
- Sorting jumpers used to switch voltage between 3.3V and 5V
- Onboard LED indicator to show the presence of power
- Short circuit protection
- Fits securely on standard 400 and 830 points on the breadboard
- Dimensions: 53*32*23mm
- Weight: 10gm
4 CHANNEL 5V RELAY
- 4-Channel relay interface board
- Operating voltage range: 3.3V to5V
- Maximum current: 10A
- Supply current: 20 mA
- High current relay of 10A @250 V AC/10A@ 30V DC
- Control signal: TTL level
- For quick and easy connection high-quality screw terminals provided
- Pull-down circuit to avoid malfunction
- Power supply indicator
- Can control both AC & DC appliances such as DC motors, solenoid valves, lamps, etc.
- LED status indicates relay ON/OFF state.
- Standard interface that can be controlled by a microcontroller (Arduino, 8051, PIC, AVR, DSP, ARM)
- For easy accessibility input signal pin connected to burg sticks
- Operating temperature: -40 to 85 degrees Celsius
- Dimension: 76*56*17mm
- Weight: 7gm
4*4 MATRIX KEYPAD
- The maximum current across each button: 3mA
- Easy communication with any microcontroller
- Ultra-thin design
- Adhesive backing provides easy integration
- High price-performance ratio
- Allows microcontroller to scan 8 output pins to check which 16 button
- Long life
- Maximum operating temperature: 0 degrees to 50 degrees Celsius
- Dimension: 70*77*1mm
- Weight: 7.5gm
5 Channel Infrared Reflective Sensor promixity sensor
- High-Quality Tracker Sensor
- The module is a convenient carrier for eight IR emitter and receiver pairs evenly paced.
- Distance between each IR Sensor: 15mm
- Uses 5 sensors for best resolution
- Great useful in building fast line following and grid navigating robots
- Comes with easy to use digital outputs with a direct connection to microcontrollers
- The array has mounting holes of 3mm diameter for easy mounting
- Status LED on each sensor for the detection of black line
5 Channel Tracking Sensor Module Board Trace Module Infrared Detection
- 5 channel high sensitivity sensor
- Operating Voltage: 0V - 5.5V
- Detection distance: 0 - 4cm (black and white line sensors), 0 - 5cm (adjustable distance detection)
- High accuracy for tracking black lines.
- Special touch sensor design, making the robot design simple
- Integrated infrared sensor barrier unblinded and distance can be adjusted by sliding rheostat
- Digital output signal
- Indicator LEDs
AC-DC Power Module HLK-5M05 230V to 5V /5W
- Meet UL, CE requirements
- Rated input voltage: AC 100V -230V
- Input voltage range: 90V -264V AC
- Maximum input current: <0.2A
- Input current surge: <10A
- Maximum input voltage: <270V AC
- Input Low Voltage Efficiency: Vin=110V AC,Output full-load≥ 69%
- Input High Voltage Efficiency: Vin=220V AC,output full-load≥ 70 %
- Long-term reliability
- Voltage Regulation: ±0.2%
- Load Regulation: ±0.5%
- Ultra-thin and small module
- High efficiency, high power density
- Low ripple and low noise
- Output overload and short circuit protection
- Working temperature: – 20 degrees to +60 degrees Celsius
- Storage temperature: -40 degrees to 80 degrees Celsius
- Relative humidity: 5-95%
- Cooling way: Natural cooling
- Atmospheric pressure: 80-106Kpa
- Weight: 21g
- Size: 38x23x18mm
CURRENT SENSOR ACS712 30AMPS
- Current sensor chip: ACS712ELC-30A
- Supply voltage: 4.5V to 5.5V DC
- Current range: -30A to 30A
- Sensitivity: 66 millivolt/ampere
- Low noise analogue signal path
- Output rise time: 5 micro sec
- Extremely stable output offset voltage
- Zero magnetic hysteresis
- Factory trimmed for accuracy
- Easy to interface with a microcontroller, since it outputs an analogue voltage
- Onboard power indicator
- Dimension: 7*5*5cm
- Weight: 400gm

Reviews
There are no reviews yet.