I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Delta Chrome II DIN Rail Power Supply (DRC Series)
| Model | Output Voltage | Output Power / Current | Input Voltage | Other specs |
|---|---|---|---|---|
| DRC-24V030W1RZ | 24 V | 30 W (≈1.5 A) RS Components+1 | 85-264 V AC | DIN-rail, class II |
| DRC-24V100W1RZ | 24 V | ~100 W (3.83 A) DeltaPSU+1 | 85-264 V AC | compact size |
| DRC-24V100W1AZ | 24 V | 91.2 W (3.8 A) DeltaPSU | 90-264 V AC | 91 × 89.9 × 55.6 mm size |
| Others: 15 W model, 12 V output, 48 V output variants. |
Description
Key Features & Highlights
-
Class II, double-isolation design: No earth/PE connection required (thus simplifies installation in cabinets) Mouser Electronics+2Mouser Electronics+2
-
Universal AC input: 85 V AC to 264 V AC (so works with Indian mains) Mouser Electronics+2DeltaPSU+2
-
Compact size built to the DIN 43880 form factor (so fits standard DIN rail enclosures/distribution boards) Mouser Electronics+1
-
High efficiency, compliant with DOE VI energy efficiency level and low no-load power consumption. Mouser Electronics
-
Certified for NEC Class 2 / Limited Power Source (LPS) and Over Voltage Category (OVC) III – relevant in industrial/building-automation contexts. Mouser Electronics+1
-
Wide range of outputs: The DRC series includes 15 W, 30 W, 60 W, 100 W models; output voltages of 5 V, 12 V, 24 V, 48 V in different variants
- https://www.mathaelectronics.com/
Reviews (0)
Shipping & Delivery
Related products
58mm Thermal Printer (Black)
- Heavy-duty 58mm direct thermal printer
- Inbuilt Adapter
- High speed printing of 90mm / Sec
- Free Drivers, USB, Adapter and Paper Roll
- Interface: usb + cash drawer support.
- Works with windows 7 / 8 /10
- High speed printing
- Long life thermal head.
- Perfect print quality
- Low cost,Low noise, fast speed print.
- Support cashbox drive.
- Compact and lightweight,beautiful design.
- Built in data bumper (data received when printing).
- Interface type parallel port or serial port.
- Support to enlarge characters and adjust characters spacing for printing.
- Compatible with esc/order pos.
- Operation temperature0~50 Degree C
- Relative humidity10~80%
- Item size 12.8 * 18 * 10.8cm
ESP8266 WIFI Industrial stable version A full test board cloud function test Black board T5
- Support 802.11b / n / g wireless standard
- Independent development MCU platform
- High cost performance
- Support UART / GPIO data communication interface
- Support STA / AP / STA + AP coexistence mode of operation
- Support SmartLink intelligent networking (APP)
- Support wireless upgrade firmware
- Support WPS network configuration
- Built-in onboard antenna &Temperature and humidity sensor
- RGB three-color light adjustable
- Provide rich AT command set configuration
- Free AiCloud cloud service for debugging
- 3 AA batteries / 5V adapter power supply
- Size: 61.6mm x 56.2mm;
TB6560 4 Axis Cnc Controller 4 Axis Stepper Motor Driver DSP Controlled 3.5A 24V
- Rated maximum output: ± 4.5A, 40V, Peak 5A, low output impedance, source 0.5?,
- the receiving end of 0.4?, low voltage shutdown, thermal parking and circulation.
- circuit protection. After I design, you can set the current output of 0.5A 1A 1.8A 2.5A.
- 3.3A 4A 4.5A to accommodate more and different motor Current.
- The drive is suitable software mach2, mach3, (mach3 have support WIN7 system), KCAM4 like.
Text to Speech TTL Module (Serial to Speech)
- Single row 0.1″ header for easy connection to a host system
- Power requirements: +5 VDC
- 30 mA idle
- 46-220 mA active (depending on speech parameters and output load)
- Communication: Asynchronous 9600 bps serial (8N1)
- Dimensions: 1.25″x1.5″x0.37″
-
Text support rate is better
-
Interface operation is simpler
-
5V single power supply.
-
Output directly connected to the speaker, can drive 4 ohms 3W / 8 ohm 2W speakers
-
Busy status output, can be connected to the microcontroller IO or indicator light, no need to be left floating.
-
Voice effect optimization
-
Module miniaturization and easy integration
-
Dimension: 33*27.5mm
-
With mounting holes
WH0201102 ABS 1.75 mm 1 kg Filament-Wanhao
- Material: ABS
- Color: White
- Material Diameter: 1.75mm
- Printing Temperature: 220° to 230°C
- Roundness Accuracy: +/- 0.5mm +/- 0.5mm
- Density: 1.31g/cm3 1.01g/cm3
- Mounted: Spool Mounted
- Net weight: 1kg
- Packaging Vacuum-sealed with desiccant to protect the filament from humidity
- Highly Detailed & Quality Outputs.
- Tried and Tested by Makenica.com
- Compatible with any FDM 3D Printer.
- ABS is stronger than PLA
- Easy to post-process.
- Environment friendly – ISO 9001 and ROHS certified
Reviews
There are no reviews yet.