I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Delta DRL Series DIN Rail power supplies
🔍 Typical Model Specifications
Here are some example specifications from representative models:
-
For the 75 W series (DRL-75W series):
-
For the 120 W series (DRL-120W1EN):
-
For the 240 W / 480 W variants:
-
Example: DRL-24V480W1EN: Output 24 V and 480 W rating. DeltaACDrives.com+1
-
For DRL-48V240W1EN: 48 V output, 240 W rating; dimensions ~ 123.7mm × 39.9mm × 116.8mm. DigiKey
-
Description
✅ Key Features / Highlights
-
Wide input voltage: typical models accept ~ 90-264 VAC or 100-240 VAC (50-60 Hz) for universal AC input. RS Components+4Scribd+4DeltaPSU+4
-
Operating temperature: Full power from ~ -30 °C to +50 °C (for many models); then de-rating up to +70 °C. Some models even specify a “-40 °C cold start”. DeltaACDrives.com+2Powerbox Australia+2
-
Good load/line regulation: e.g., ±0.5 % line, ±0.5-1 % load in some models. Powerbox Australia+1
-
Built-in protections: short-circuit (auto-recovery/hiccup), over-temp, over-voltage, overload/overcurrent. Many models support “constant current mode” for reactive loads (inductive/capacitive). Scribd+2DeltaPSU+2
-
DIN-rail mounting (TS35 rail per EN 60715) for industrial cabinet use. Scribd+1
-
Slim design / high power density for DIN-rail format. Some models list compliance to SEMI F47 for voltage sag tolerance (industrial robustness). DeltaACDrives.com
-
Wide output voltage options: 12 VDC, 24 VDC, 48 VDC. Various power ratings (75W, 120W, 240W, 480W).
- https://www.mathaelectronics.com/
Reviews (0)
Shipping & Delivery
Related products
Arduino CNC Shield
- Shield type: Arduino Nano
- Firmware: GRBL
- Modular stepper motor drivers: 3
- Limit switches: 6
- Micro-stepping: 1/16
- Coolant enable
- Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825, and others) (Not Included)
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
- Please note that this is an unassembled kit and needs soldering.
- Latest Arduino CNC Shield Version 3.51
HC-06 4Pin Bluetooth Module Without Reset Switch
- Working current: matching for 30 mA, matching the communication for 8 mA.
- Dormancy current: no dormancy.
- Used for a GPS navigation system, water, and electricity gas meter reading system.
- With the computer and Bluetooth adapter, PDA, seamless connection equipment.
- Bluetooth module HC-08 Master and slave Two in one module.
- Use the CSR mainstream Bluetooth chip, Bluetooth V2.0 protocol standards.
- Potter default rate of 9600, the user can be set up.
- Bluetooth protocol: Bluetooth Specification v2.0+EDR
- Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps.
- Security: Authentication and encryption.
- Profiles: Bluetooth serial port.
Text to Speech TTL Module (Serial to Speech)
- Single row 0.1″ header for easy connection to a host system
- Power requirements: +5 VDC
- 30 mA idle
- 46-220 mA active (depending on speech parameters and output load)
- Communication: Asynchronous 9600 bps serial (8N1)
- Dimensions: 1.25″x1.5″x0.37″
-
Text support rate is better
-
Interface operation is simpler
-
5V single power supply.
-
Output directly connected to the speaker, can drive 4 ohms 3W / 8 ohm 2W speakers
-
Busy status output, can be connected to the microcontroller IO or indicator light, no need to be left floating.
-
Voice effect optimization
-
Module miniaturization and easy integration
-
Dimension: 33*27.5mm
-
With mounting holes
Reviews
There are no reviews yet.