I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
NXC Series AC Contactor (6A – 630A) – 3P
NXC Series AC Contactor (6A – 630A) – 3P
The CHINT NXC Series is a reliable 3-pole AC contactor designed for motor control, power switching, and industrial automation.
Key Features
-
Current Range: 6A to 630A
-
Poles: 3P (3 normally open contacts)
-
Voltage: 220V – 690V (operational), up to 1000V insulation
-
Coil Options: AC / DC / AC-DC (model dependent)
-
Mounting: DIN rail (small models) / Screw mounting (large models)
-
Standards: IEC 60947-1, IEC 60947-4-1
-
Aux Contacts: Optional NO/NC combinations
-
Applications: Motor starters, pumps, HVAC, machinery control
Key Specifications & Features of NXC Series
-
Rated Operational Current (Ie):
-
From 6 A up to 630 A. chintglobal.com+2electronicverse.in+2
-
-
Rated Operational Voltage (Ue):
-
Between 220 V and 690 V. chintglobal.com+2chintglobal.com+2
-
-
Insulation Voltage (Ui):
-
For smaller models (NXC-06M … NXC-100): 690 V
-
For larger models (NXC-120 … NXC-630): 1000 V electronicverse.in+1
-
-
Number of Poles:
-
Primarily 3P (3 poles) for most models. shop.sirichaielectric.com+1
-
There are also 4-pole variants, but only in some smaller sizes (e.g., “only for NXC-06M … 12M” according to the catalog). chintglobal.com+1
-
-
Coil Control Methods / Coil Types:
-
AC coil: for models NXC-06(M) up to ~225 A. electronicverse.in
-
DC coil: for mini-types (e.g., NXC-06M … 12M) chintglobal.com+1
-
AC/DC coil: for larger ones (NXC-265 … 630) electronicverse.in
-
-
Installation / Mounting:
-
Smaller units (up to NXC-100): can be installed on DIN rail and screwed. chintglobal.com
-
Larger units (NXC-120 to 630): screw mounting only. electronicverse.in
-
-
Standards / Certifications:
-
Complies with IEC/EN 60947-1, IEC/EN 60947-4-1, IEC/EN 60947-5-1. chintglobal.com
-
-
Poles / Contacts:
-
Main contacts: 3 NO (normally open) for 3-pole models. shop.sirichaielectric.com
-
Auxiliary contacts: options like 1 NO + 1 NC, 2 NO + 2 NC depending on the model. BaoAnJSC+1
-
-
Environmental Conditions:
-
Operating / ambient temperature: –35 °C to +70 °C. chintglobal.com
-
Installation altitude: up to 2000 m above sea level. chintglobal.com
-
Pollution Degree: 3 (relatively high pollution environments) as per spec sheet. shop.sirichaielectric.com
-
-
Durability / Mechanical Life:
-
(From datasheet) Electrical and mechanical life are specified in catalog — refer to catalog for cycle counts. chintglobal.com
-
-
Matching Overload Relays:
-
Recommended / compatible thermal overload relay: NXR series (for making a DOL starter) according to Chint’s documentation. Amax Electric+1
-

Related products
Creality CR-5 Pro 3D PRINTER/300*325*380mm/multiple materials supported
Peacock Blue PLA 1.75 mm 1 KG Filament-Wanhao
Text to Speech TTL Module (Serial to Speech)
- Single row 0.1″ header for easy connection to a host system
- Power requirements: +5 VDC
- 30 mA idle
- 46-220 mA active (depending on speech parameters and output load)
- Communication: Asynchronous 9600 bps serial (8N1)
- Dimensions: 1.25″x1.5″x0.37″
-
Text support rate is better
-
Interface operation is simpler
-
5V single power supply.
-
Output directly connected to the speaker, can drive 4 ohms 3W / 8 ohm 2W speakers
-
Busy status output, can be connected to the microcontroller IO or indicator light, no need to be left floating.
-
Voice effect optimization
-
Module miniaturization and easy integration
-
Dimension: 33*27.5mm
-
With mounting holes
Turbidity Sensor Module Testing Suspended Particle for Arduino
Vibration Motor
WH0201102 ABS 1.75 mm 1 kg Filament-Wanhao
- Material: ABS
- Color: White
- Material Diameter: 1.75mm
- Printing Temperature: 220° to 230°C
- Roundness Accuracy: +/- 0.5mm +/- 0.5mm
- Density: 1.31g/cm3 1.01g/cm3
- Mounted: Spool Mounted
- Net weight: 1kg
- Packaging Vacuum-sealed with desiccant to protect the filament from humidity
- Highly Detailed & Quality Outputs.
- Tried and Tested by Makenica.com
- Compatible with any FDM 3D Printer.
- ABS is stronger than PLA
- Easy to post-process.
- Environment friendly – ISO 9001 and ROHS certified

Reviews
There are no reviews yet.