I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-14%
1 Pole 7 Way Rotary Switch Metal
Original price was: ₹30.00.₹25.00Current price is: ₹25.00. inc. GST
4 Pole 3 Way Rotary Switch Plastic
Original price was: ₹80.00.₹60.00Current price is: ₹60.00. inc. GST
1 Pole 7 Way Rotary Switch Plastic
Original price was: ₹35.00.₹30.00Current price is: ₹30.00. inc. GST
- 1 Pole 7 Position design
- ceramic structure
- Easily turned.
- Widely used on radio, TV, industrial machine control unit, or other electronic devices
Description
A rotary switch is a switch that controls distinct circuit operations by permitting rotation. A Rotary switch accomplishes this by having a spindle or “rotor” with a contact arm or “spoke” that protrudes from its surface like a cam. It also features a ring of terminals that surrounds the rotor in a circle. Each terminal can operate as a contact point for the “spoke.” Any of a number of different electrical circuits can be linked to the rotor in this fashion.
The advantage of a rotary switch is that it may be laminated to employ many poles. Each layer corresponds to one pole. Rotary switches, in most cases, feature a detent mechanism. As a result, rather than stalling in an intermediate position, it “clicks” from one active position to the next. Rotary switches, as a result of these characteristics, can give larger pole and throw capabilities than basic switches.
The spindle
In a rotary switch, the current passes via a spinning spindle that contains numerous distinct rotors. When the switch is in a given position, an arm protruding outward from each rotor will make contact with a terminal. A switch can have dozens of positions, each of which is generally associated with a distinct circuit.
Controlling the Switch
It is just necessary for the rotary switch to be in the precise position for it to appear on a certain circuit. A rotor that rotated too freely would be difficult to control and might easily be switched off or tossed to the wrong position. To prevent this, rotary switches feature a detent mechanism that causes the switch to “click” into place and stay in that position until it is turned with adequate effort. A detent is a wheel that is mounted to the rotor and has notches or grooves. A needle bearing with a spring or a sliver of spring steel is pressed against the wheel. Rotary switches, as a result of these characteristics, can give larger pole and throw capabilities than basic switches.
Reviews (0)
Shipping & Delivery
Related products
APM/Pixhawk Power Module V6.0 Output BEC 3A XT60 Plug 28V 90A
- Input Voltage Range: 6-28V DC
- Output voltage: 5.3V ± 0.1V
- Maximum output current: 3A
- Maximum current: 90A
- Maximum voltage: 30V
- Supports from 2 cell to 6 cell battery.
- 6P cable can be directly connected to APM/Pixhawk flight control
- Additional 4P rows of pin-free to wire/PIN to connect to another flight control
- Voltage and current measurement configured for 5V ADC.
- Switching regulator outputs 5.3V and 3A max.
- Dimensions: 25mm x 21mm x 9mm
- Weight: 17gm
Capacitor Touch Dimmer, Constant Voltage LED Stepless Dimming, PWM Control Board
- Voltage range: 4V to 5V
- Maximum output current: 500mA
- Hole distance: 16 mm
- Aperture: 5 mm
- The lamp brightness can be adjusted by requirement, it is very to operate.
- It can touch in medium protection, such as glass, acrylic, plastic, ceramics, and so on, which is very safe.
- Anti power and phone interference, the EFT can reach above +/-2KV; the touch response sensitivity and reliability will not be affected by the close distance or multi-angle mobile phone interference.
- Dimming mode: Non-polar PWM dimming.
- PCB size: 23 x 20mm
Dean Connector
- Male plug size: About 13* 7* 19mm
- Female plug size: About 13* 7* 15mm
- Current Rating: 30Amps
- Colour: Red and golden
- Material: Plastic and metal
- Provides a secure connection for battery and motor connections
- Eliminates the possibility of wrong polarity connections
- Used in RC hobby, car, boat, plane, helicopter, LIPO battery, etc.
- Dimension: 9x0.7x2cm
- Weight:20gm
HX711–24 Bit Analog to Digital Converter (ADC)
- It is an ADC converter with two differential input channels
- An active-low noise PGA is integrated inside the chip which provides the gain of 32, 64 and 128
- It has a power-on-reset capability which simplifies digital interface initialization.
- All controls to the IC are made through the pins. Programming is not needed.
- You can select a data rate of 10SPS or 80SPS at the output.
- Provides simultaneous supply rejection of 50Hz and 60Hz supply.
- Built-in analog power supply regulator
- The voltage supply range is from 2.6V to 5.5V
- The temperature range is from -40 °C to +85℃
IR LED Sensor
- Size: 5mm LED
- Wavelength: 940nm wavelength (most commonly used)
- Forward current (IF) is 100mA (normal condition) and 300mA (max.)
- 5A of surge forward current
- 24v to 1.4v of forward voltage
- Temperature : -40 to 100 ℃
- Soldering Temperature should not exceed 260 ℃
- Power Dissipation of 150mW at 25℃ (free-air temperature) or below
- Spectral bandwidth of 45nm
- Viewing angle: 30 to 40 degree
- High Reliability
- Excessive radiant intensity
- Having lead spacing of 2.54mm
- Easy to use with breadboard or perf board
Solid State Relay Module DC To AC SSR-40DA 3-32VDC/24-380VAC 40A
- Control mode: DC-AC
- Input voltage: 3-32V DC.
- Output voltage: 24-380V AC.
- Output current: 40A.
- Working voltage: 250V.
- Material: plastic + metal.
- Loading current: 40A
- Control current: 3-25mA DC
- On voltage: ≤1.5V AC
- One-off Time: ≤10ms
- Off Leakage Current: ≤2mA
- Dielectrics voltage-resistance: 2500VAC
- Environment temperature: -30 to +75
- Long service life and high reliability.
- Reduced electromagnetic interference.
- Highly reliable, compact size designed to offer users maximum simplicity.
TP5100 4.2v 8.4v Single Double Lithium Battery Charge Management Li-ion Battery Compatible 2A Charging Board
- Input voltage: 5-15V DC power supply.
- Charge status: full and unloaded blue lights, charging red.
- Double 8.4v / 4.2v lithium rechargeable single .
- Programmable charge current. 0. 1A-2A .
- Programmable steady precharge current 10% -100%.
- Wide operating voltage, maximum reach I8V.
- Red and green LED charge status indicator.
- Chip temperature protection, overcurrent protection, under voltage protection.
- Battery temperature protection, reverse battery shutdown, short circuit protection.
- Switching frequency 400Khz, usable inductance 20uH and more.
- PWR_ON Power battery for switching control.
Reviews
There are no reviews yet.