I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
120pcs 12 values 0.22UF-470UF Aluminum electrolytic capacitor assortment kit set pack
₹300.00 Original price was: ₹300.00.₹250.00Current price is: ₹250.00. inc. GST
- Type: Aluminum Electrolytic Capacitor
- Structure: Trimmer Capacitor
- Capacitance: 0.22UF-470UF
- Tolerance: 20%
- Lead Spacing: 5 mm
- Mounting: THT
- Leakage Current: 3 uA
- Dimensions:12.5*21 mm
- Operating Temperature: -25~105C
These 120pcs 12 values 0.22UF-470UF Aluminum electrolytic capacitors have a long life and great reliability (12000 hrs). It also has a large ripple current at a high frequency and good smoothing properties. These electrolytic capacitors may be used in a variety of applications, including power supplies, audio amplifiers, and hobby projects. An electrolytic capacitor is a type of capacitor that uses an electrolyte to operate. This results in a higher capacitance than other types of capacitors. Because of their enormous capacitance, these capacitors are commonly employed in DC power supply circuits. And it’s tiny, which helps to decrease ripple voltage and is useful for coupling and decoupling applications.
An electrolyte is a liquid or gel that has a high concentration of ions in it. These electrolytic capacitors are available in two forms: wet-electrolyte and solid polymer, both of which are frequently composed of tantalum or aluminium, though other materials might be utilised as well. Aluminium electrolytic capacitors are used in a variety of applications, including power supply, computer motherboards, and a variety of household appliances. 12 values 120pcs 0.22UF-470UF The following values are available in the aluminium electrolytic capacitor selection kit:
- 50V 0.22F +/- 20% 105 Celsius diameter 4 x 7 mm
- 50V 0.47F +/- 20% 105 Celsius diameter 4 x 7 mm
- 50V 1 F +/- 20% 105 Celsius diameter 4 x 7 mm
- 50V 2.2F +/- 20% 105 Celsius diameter 4 x 7 mm
- 50V 4.7F +/- 20% 105 Celsius diameter 4 x 7 mm
- 50V 10F +/- 20% 105 Celsius diameter 4 x 7 mm
- 50V 22F +/- 20% 105 Celsius diameter 4 x 7 mm
- 16V 33F +/- 20% 105 Celsius diameter 4 x 7 mm
- 16V 47F +/- 20% 105 Celsius diameter 4 x 7 mm
- 16V 100F +/- 20% 105 Celsius diameter 5 x 7 mm
- 16V 220F +/- 20% 105 Celsius diameter 5 x 7 mm
- 16V 470F+/- 20% 105 Celsius diameter 6 x 7 mm

Related products
5 Pin RMC Connector
APM/Pixhawk Power Module V6.0 Output BEC 3A XT60 Plug 28V 90A
- Input Voltage Range: 6-28V DC
- Output voltage: 5.3V ± 0.1V
- Maximum output current: 3A
- Maximum current: 90A
- Maximum voltage: 30V
- Supports from 2 cell to 6 cell battery.
- 6P cable can be directly connected to APM/Pixhawk flight control
- Additional 4P rows of pin-free to wire/PIN to connect to another flight control
- Voltage and current measurement configured for 5V ADC.
- Switching regulator outputs 5.3V and 3A max.
- Dimensions: 25mm x 21mm x 9mm
- Weight: 17gm
GSM Antenna
HX711–24 Bit Analog to Digital Converter (ADC)
- It is an ADC converter with two differential input channels
- An active-low noise PGA is integrated inside the chip which provides the gain of 32, 64 and 128
- It has a power-on-reset capability which simplifies digital interface initialization.
- All controls to the IC are made through the pins. Programming is not needed.
- You can select a data rate of 10SPS or 80SPS at the output.
- Provides simultaneous supply rejection of 50Hz and 60Hz supply.
- Built-in analog power supply regulator
- The voltage supply range is from 2.6V to 5.5V
- The temperature range is from -40 °C to +85℃
IR LED Sensor
- Size: 5mm LED
- Wavelength: 940nm wavelength (most commonly used)
- Forward current (IF) is 100mA (normal condition) and 300mA (max.)
- 5A of surge forward current
- 24v to 1.4v of forward voltage
- Temperature : -40 to 100 ℃
- Soldering Temperature should not exceed 260 ℃
- Power Dissipation of 150mW at 25℃ (free-air temperature) or below
- Spectral bandwidth of 45nm
- Viewing angle: 30 to 40 degree
- High Reliability
- Excessive radiant intensity
- Having lead spacing of 2.54mm
- Easy to use with breadboard or perf board
Solid State Relay Module SSR-25DA 25A /250V 3-32V DC Input 24-380VAC Output
- Control mode: DC-AC
- Input voltage: 3-32V DC.
- Output voltage: 24-380V AC.
- Output current: 25A.
- Working voltage: 250V.
- Material: plastic + metal.
- Environment temperature: -30 to +75
- Long service life and high reliability.
- Reduced electromagnetic interference.
- Highly reliable, compact size designed to offer users maximum simplicity.
- Dimension: 6. 5Cm x 4. 5Cm x 2. 2Cm
Solid State Relay SSR-40DD 40A 3-32V DC to 5-60V DC SSR 40DD Relay Solid State
- Model: SSR-40 DD.
- Control mode: DC-DC
- Input voltage: 3-32V DC.
- Output voltage: 5-60V DC.
- Output current: 40A.
- On voltage: ≤1v.
- One-off time: ≤10ms.
- Off leakage current: ≤2ma.
- Loading current: 40A
- Control current: 3-25mA DC
- Material: plastic + metal.
- Environment temperature: -30 to +75
- Long service life and high reliability.
- Reduced electromagnetic interference.
- Highly reliable, compact size designed to offer users maximum simplicity.
- Weight: 0. 106Kg.
XT60 Connector
- Manufacturer: AMASS
- Connector Series: XT60H
- Rated Voltage: DC 500V
- Metal Material: Brass Gold Plated
- Rated Current: 30A
- Momentary Current: 60A
- Number of pins: 2
- Colour: Yellow
- Contact Resistance: 0.55mΩ
- FR Level: UL94 V0
- Use Times: 1000 TIMES
- Temperature: -20℃ to 120℃
- Spatial Orientation Straight
- Compatible for Wire size up to 12AWG
- Mechanical mounting for cable
- Electrical mounting soldered
- Contact plating Gold flash

Reviews
There are no reviews yet.