I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
16*2 ORANGE (LCD DISPLAY MODULE)
₹350.00 Original price was: ₹350.00.₹250.00Current price is: ₹250.00. inc. GST
- Input voltage: 4.7V TO 5.3V
- Operating voltage: 5V
- Current consumption is 1mA without backlight
- Consist of 2 rows and each row can print 16 characters
- Can display alphabets and numbers, i.e. alphanumeric
- Viewing area: 99*24mm
- Character size: 5.2*9.55mm
- Each character build by5*8 pixels
- Works on both 8 bit and 4 bit
- Used in industrial applications such as audio, automotive control panels, medical devices, and home automation products, etc.
- Operating temperature:0 degree to 50 degree Celsius
- Storage temperature: -10 degrees to 50 degree Celsius
- 1/16 duty cycle
Displaying information is one of the crucial steps in electronic projects. So using LCDs has always been one of the most popular ways to display information. 16*2 LCD module is yellow with an orange backlight display module. These are brand new and high-quality displays with orange backlight. It ensures high contrast and a wide viewing angle. This display is larger than a normal LCD display. These are big character LCD display modules with black text on the Orange background. LCD modules are the most prominent as they are low cost and program friendly, hence these modules are commonly used in the embedded system.
16*2 LCD module consists of 16 columns and 2 rows, so it has 32 (16*2) characters in total. Each character has 40pixels (5*8) and thus for 32 characters there 1280 pixels (32*40). LCD modules are the most prominent as they are low cost and program friendly, hence these modules are commonly used in the embedded system. An interface IC HD44780 is attached to the backside of the LCD module to determine the position of the pixel. This IC gets commands and data from the microcontroller and processes it, thus display it on the screen. Using a resistor or PWM the color can be dimmed easily.
It is quite simple to work with these LCDs s and they have full compatibility with all microcontrollers and processor boards. This display module works on 5V and has a white backlight which can be on or off as per requirement. This module consists of a minimum of 6 I/O pins to interface this LCD screen. Moreover, it can work in both 4 bit and 8-bit MCU interfaces.

Related products
16*2 WHITE (LCD DISPLAY MODULE)
- Input voltage: 4.7V TO 5.3V
- Operating voltage: 5V
- View angle: 6 o clock
- Current supply:1.1
- Maximum supply current:2.5
- 1/16 duty cycle
- Input leakage current:1micro ampere
- Chip on board IC
- Rise time:200 to 250ms
- Fall time: 300 to 350ms
- Controller: SPLC780D
- Each character build by 5*8 pixels
- Consist of 2 rows with each row has 16 characters
- Works on both 8 bit and 4 bit
- Operating temperature:0 degree to 50 degree Celsius
- Storage temperature: -10 degrees to 50 degree Celsius
- Low Current consumption
- Alphanumeric display
- Dimension: 69.5*14.5mm
- Compact size and lightweight
- Easy to interface
16×2 (1602) LCD Keypad Shield
- Operating Voltage:5V
- 5 Push buttons.
- RST button to reset Arduino program.
- Integrate a potentiometer for adjusting the backlight.
- Expanded available I/O pins.
- Blue light with white characters.
- Uses 4 Bit Arduino LCD Library
- Screen contrast adjustment
- Arduino Reset button
- The keypad consists of 6 keys select, up, right, down, left and reset.
- To save the digital IO pins, the keypad interface only uses one ADC channel.
- The key value is read out through a 5 stage voltage divider.
20/4 GREEN (LCD DISPLAY MODULE)
- Operating voltage: 5V
- Display format: 20 characters * 4 line
- Display mode: STN or FSTN
- Dot-matrix: 5*8 dots
- Character size: 2.95 * 4.75mm
- Character pitch: 3.55 * 5.35mm
- LCD driver IC: ST7066U
- 1/16 duty cycle
- Wide viewing angle and high contrast
- Works on both 8-bit parallel interface
- Operating temperature: -20 degree to 70 degree Celsius
- Low Current consumption
- Dimension: 98*60*13.6mm
- Compact size and lightweight
4 PIN 128*64 OLED 0.96” BLUE
- Super high brightness and high contrast
- Driver IC: SSD1306
- Input voltage: .3v to 6 v
- Ultra-wide viewing angle >160 degree
- Low power consumption with 0.04 W
- Support wide range of Voltage: 3.3V to 5V
- OLED self-lights, no backlight required
- Fully compatible with Arduino
- Communication via IIC, only two I/O ports
- Working temperature: -30 degree to 80 degree
- Dimension: 27*27*4.1mm
- Supported platform: Arduino, 51 series, MSP430, SCR chips
- No font is required, software takes the word MODULO
5” TFT for Raspberry PI
- Display Size: 5″
- Resolution: 800 x 480 pixel
- Supply Voltage: 5V @1A
- Touch: 4-wire resistive touch
- LCD DRIVER IC: ILI9486L
- Refresh rate:60HZ
- Good touch response
- Large viewing angle
- Fast response time
- Support backlight control for low power consumption
- Compatible with Raspberry Pi 3, Pi2, Model B/B+
- Not only for Raspberry Pi
- Not only for mini-PCs, it can also work as a computer monitor
- The monitor can work with standard HDMI devices (adjust output resolution to 800*480),
- Touch function is only available for Raspbian and Ubuntu systems.
- Touch panel function not supported---Retropie, Windows 10
- LCD Size:11mm*77.93mm
- Weight:175g
6 PIN 128*64 OLED 0.96” BLUE
- Resolution: 128*64
- Visual angle>160
- Input voltage:3.3V to 6V
- Compatible I/O level:3.3v, 5v
- Only need 2 I/O port to control
- Driver IC: SSD1306
- Module volume:27*27*4.1mm
- Working temperature: -30 degree to 70 degree
- Full compatible with Arduino
- Configured for SPI protocol and can be easily changed to IIC
I2C MODULE WITH 16*2 CHARACTER LCD
- Supply voltage: 5V
- Display mode: STN
- Display format: 16*2
- Input data: 4 bit or 8 bit (for LCD)
- I2C address: 0x20~0x27 (original address is 0x20,we can change it ourselves)
- Compatible with multiple communication logic levels: 2.8~5VDC
- Compatible for 16*2 LCD
- Serial I2C control of LCD display using PCF8574
- Allow data display via only 2 wires.
- Backlight and contrast adjustment by the potentiometer
- Supports 7 ASCII fonts, 5 graphic functions
- Supports 128 level backlight lightness adjustment.
- Support 64 level screen contrast adjustment
- Supports device address modification
- Dimension: 10*4*5cm
- Size: 150gm
Waveshare 10.1inch HDMI LCD (B) (with case) 1280×800 IPS
- IPS screen,1280×800 high resolution
- Capacitive touch control supports up to ten-points touch
- When works with Raspberry Pi, supports Raspbian, Ubuntu, single touch, and driver free
- When working as a computer monitor, supports Windows 10/8.1/8/7, ten-points touch, and driver free
- Supports Banana Pi, Banana Pro, comes with Lubuntu, Raspbian images
- Supports BB Black, comes with Angstrom image
- HDMI interface for displaying, USB interface for touch control
- Supports 5-level backlight adjustment.
- Case Material: high-quality black Acrylic
- Comes with a back holder, 45degree tilt angle
- Dimensions: 18 x 10 x 9 cm
- Weight: 800gm

Reviews
There are no reviews yet.