I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
2000W Thyristor SCR Dimmer
2000W Thyristor SCR Dimmer – High-power AC dimmer for smooth and efficient voltage control. Supports up to 2000W, ideal for lamps, heaters, and compatible motors. Compact, reliable, and easy to install.
Description
The 2000W Thyristor SCR Dimmer is a high-performance power control device designed for smooth and precise regulation of AC loads. Built using a reliable SCR (Silicon Controlled Rectifier) thyristor, this dimmer allows efficient control of voltage and power, making it ideal for both residential and industrial applications.
It supports loads up to 2000 watts, enabling stable dimming of high-power devices such as heaters, filament lamps, soldering irons, motors (with compatible design), and speed control systems. The dimmer ensures low power loss, high efficiency, and stable operation, even under continuous use.
With a compact design and easy installation, the 2000W SCR dimmer is perfect for DIY projects, automation panels, educational labs, and industrial control systems.
Key Features:
-
Power handling capacity up to 2000W
-
High-quality SCR thyristor-based control
-
Smooth and precise voltage regulation
-
Low heat generation and high efficiency
-
Compact, durable, and easy to install
-
Suitable for AC loads
Applications:
-
Light dimming (incandescent/filament lamps)
-
Heater temperature control
-
Motor speed control (compatible loads)
-
DIY electronics and automation projects
-
Industrial and educational use
Reviews (0)
Shipping & Delivery
Related products
Arduino LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino
- Microcontroller: ATmega168 or ATmega328V
- Operating Voltage: 2.7-5.5 V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40 mA
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
- The back side of the LilyPad is now completely flat!
Creality CR-5 Pro 3D PRINTER/300*325*380mm/multiple materials supported
• Print Size: 300*225*380mm
• Machine Size: 530*487*612mm
• Package Szie： 625*547*710mm
• Filament diameter: 1.75 mm PLA/ABS
• File Format: STL/OBJ/AMF
• Layer Heigh: 0.1-0.4mm
• Sicer software: Creality Slicer, Cura, Simplify3D, Repetier-Host
• Connectivity: Online/SD card
• Mainboard: ATmega2560 Silent board
• UI interface: 4.3inch touch screen
ESP8266 WIFI Industrial stable version A full test board cloud function test Black board T5
- Â Support 802.11b / n / g wireless standard
- Independent development MCU platform
- High cost performance
- Support UART / GPIO data communication interface
- Support STA / AP / STA + AP coexistence mode of operation
- Support SmartLink intelligent networking (APP)
- Support wireless upgrade firmware
- Support WPS network configuration
- Built-in onboard antenna &Temperature and humidity sensor
- RGB three-color light adjustable
- Provide rich AT command set configuration
- Free AiCloud cloud service for debugging
- 3 AA batteries / 5V adapter power supply
- Size: 61.6mm x 56.2mm;
Text to Speech TTL Module (Serial to Speech)
-  Single row 0.1″ header for easy connection to a host system
- Power requirements: +5 VDC
- 30 mA idle
- 46-220 mA active (depending on speech parameters and output load)
- Â Communication: Asynchronous 9600 bps serial (8N1)
- Dimensions: 1.25″x1.5″x0.37″
-
Text support rate is better
-
 Interface operation is simpler
-
5V single power supply.
-
Output directly connected to the speaker, can drive 4 ohms 3W / 8 ohm 2W speakers
-
Busy status output, can be connected to the microcontroller IO or indicator light, no need to be left floating.
-
 Voice effect optimization
-
 Module miniaturization and easy integration
-
Dimension: 33*27.5mm
-
With mounting holes
Reviews
There are no reviews yet.