I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-17%
Smart 3pin DHT11 Digital Temperature And Relative Humidity Sensor Module + PCB
Original price was: ₹300.00.₹199.00Current price is: ₹199.00.
Sonar Range Finder -High Performance Ultrasonic Sensor Module
Original price was: ₹2,142.86.₹2,100.84Current price is: ₹2,100.84. inc. GST
50~100 DC12V W1209 Digital Thermostat Thermometer Temperature Control
Original price was: ₹300.00.₹250.00Current price is: ₹250.00.
- Supply Voltage: 12V
- Measuring Inputs: NTC10K
- Measurement Accuracy: 0.1 C
- Control Accuracy: 0.1 C
- Refresh Rate: 0.5 Seconds
- Cable Length: 0.5 Meter
- Output Type: 1 Channel Relay Output
- Capacity: 10A
- Temperature Control Range: -50 ~ 110 C
- Resolution at -9.9 to 99.9: 0.1 C
- Resolution at all other temperatures: 1 C
- Temperature: -10 ~ 60 C
- Humidity: 20-85%
- Dimensions:48mm x 40mm x 14mm
Description
XH-W1209 Mini thermostat Temperature controller is an affordable 12V Temperature controller with a 7-segment display and 3 switch keypad for setting temperature and other parameters. The module provides an NTC thermistor temperature sensing and has an accuracy of 0.1 C. This module is also known as an incubator sensor module. Because they are widely used in egg hatching applications and also to control temperature power in most types of electrical devices based on the temperature sensed by the NTC temperature sensor. The sensor can display the current temperature in degrees Centigrade via 3 digits seven-segment display and the current relay state by an on-board LED. This temperature controller can measure a temperature in the range of -50~+110 Degree Centigrade.
W1209 features an inbuilt embedded micro-controller that makes programming quite simple. Hence, the various parameters in the module configured using the three switches including ON and OFF trigger temperatures. Moreover, the W1209 Mini Thermostat Temperature Controller Switch operates at voltages up to a maximum of 240V AC at 5A or 14V DC at 10A to power on. Meanwhile, the onboard large and clear LED display offers better readability.
Parameter Setting (P0~P8):
- P0: Cooling / Heating mode
- P1: Â Backlash Setting
- P2: Highest Range Setting
- P3: Lowest Range Setting
- P4: Temperature Calibration
- P5: Delay Start Time
- P6: High-Temperature Alarm
- P7: Data Lock Switch
- P8: Restore Factory Settings
APPLICATIONS
- Domestic freezer
- Water tank
- Refrigerator
- Industrial chiller
- Boiler
Reviews (0)
Shipping & Delivery
Related products
AM2302 WIRED MODULE
- Low cost
- 3V to 5V power and I/O
- 5mA max current use during conversion (while requesting data)
- Good for 0-100% humidity readings with 2-5% accuracy
- Good for -40 to 80°C temperature readings ±0.5°C accuracy
- No more than 0.5 Hz sampling rate (once every 2 seconds)
- 3 wires 23cm long (9")
- Dimensions: 27x 58.75 x 13.30mm
DHT22 MODULE
- Power supply: 3.3-5.5VDC
- Operating range: humidity 0-100%R
- Ultra-Low Power.
- No Additional Components.
- Long-Distance Signal Transmission.
- All Calibration, Digital Output & Completely Interchangeable.
- Relative Humidity & Temperature Measurement.
- Humidity Measurement Precision: 2-5% RH.
- Temperature Measurement Precision: 0.5 deg C.
- Calibrated digital signal
- Outstanding long-term stability
DS18B20 MODULE
- Resolution: 9bits to 12bits (Selectable)
- Supply Voltage (V): 3 to 5.5
- Temperature Range(°C): -55 to +125
- Measuring Accuracy(°C): ±0.5
- Uses 1-Wire interface- requires only one digital pin for communication
- Unique 64 bit ID burned into the chip
- Multiple sensors can share one pin
- Maximum conversion time and response: 750 ms
- Multidrop capability simplifies distributed temperature sensing applications
- Requires no external components
- Digital signal output
- 18B20 Temperature Sensor Chip
- Send data via a pin
- User-definable nonvolatile (NV) alarm settings
- Dimension: 19*15*6cm
- Weight: 9gm
GY-906-BCC MLX90614ESF-BCC IR TEMPERATURE MODULE
- Input supply: 3V-5V
- Input current: 2mA
- Small size, low cost.
- Mounted on a breakout board with two types of pins.
- 10k pull up resistors for the I2C interface with optional solder jumpers.
- Easy to integrate
- Factory calibrated in a wide temperature range
- Mounted on a breakout board with two types of pins
- -40 degrees to 125 degrees C for sensor temperature
- -70 degrees to 380 degrees C for object temperature.
- High accuracy of 0.5C over a wide temperature range
- The measurement resolution of 0.02C
- Single and dual-zone versions
- SMBus compatible digital interface
- Customizable PWM output for continuous reading
- Simple adaptation for 8v to 16V applications
- Sleep mode for reduced power consumption
- Different package options for applications and measurements versatility
LM35 SENSOR
- Calibrated Directly in Celsius (Centigrade)
- Operates from 4 V to 30 V
- Linear + 10-mV/°C Scale Factor
- ±0.5°C Ensured Accuracy (at 25°C)
- Can measure temperature ranging from -55°C to 150°C
- Less than 60-µA Current Drain
- Low Self-Heating, 0.08°C in Still Air
- Non-Linearity Only ±¼°C Typical
- Low-Impedance Output, 0.1 Ω for 1-mA Load.
- Drain current is less than 60uA
- The output voltage is directly proportional (Linear) to temperature (i.e.) there will be a rise of 10mV (0.01V) for every 1°C rise in temperature
- Suitable for Remote Applications
- Low-cost temperature sensor
- Available in TO-92, TO-220, TO-CAN, and SOIC package
Reviews
There are no reviews yet.