I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
8.5×20mm (8520) Micro Coreless Motor with Propeller
8.5×20mm (8520) Micro Coreless Motor with Propeller
Compact and lightweight coreless DC motor offering high speed, smooth operation, and low power consumption. Supplied with a propeller, it is ideal for mini drones, RC projects, robotics, and DIY electronics. Perfect for space-constrained, high-performance applications.
8.5×20mm (8520) Micro Coreless Motor with Propeller
The 8520 Micro Coreless Motor (8.5×20mm) with propeller is a lightweight, high-speed DC motor designed for compact and precision-driven applications. Featuring a coreless design, it delivers smooth operation, fast response, and high efficiency with minimal vibration and low power consumption.
This motor comes pre-fitted with a propeller, making it ideal for mini drones, RC aircraft, DIY flying projects, STEM kits, and robotics experiments. Its small size and low weight make it perfect for space-constrained designs where performance matters.
Key Features
-
Model: 8520 Micro Coreless Motor
-
Size: 8.5mm × 20mm
-
Design: Coreless DC motor for high efficiency
-
Smooth & low-noise operation
-
Lightweight & compact
-
Quick start and fast response
-
Includes propeller for ready-to-use applications
Applications
-
Mini quadcopters & micro drones
-
RC planes and flying toys
-
Robotics and automation projects
-
DIY electronics & educational projects
-
STEM learning kits and prototypes

Related products
Arduino CNC Shield
- Shield type: Arduino Nano
- Firmware: GRBL
- Modular stepper motor drivers: 3
- Limit switches: 6
- Micro-stepping: 1/16
- Coolant enable
- Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825, and others) (Not Included)
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
- Please note that this is an unassembled kit and needs soldering.
- Latest Arduino CNC Shield Version 3.51
Arduino LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino
- Microcontroller: ATmega168 or ATmega328V
- Operating Voltage: 2.7-5.5 V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40 mA
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
- The back side of the LilyPad is now completely flat!
Creality CR-5 Pro 3D PRINTER/300*325*380mm/multiple materials supported
CS DC Geared Motor 10 RPM
HC-06 4Pin Bluetooth Module Without Reset Switch
- Working current: matching for 30 mA, matching the communication for 8 mA.
- Dormancy current: no dormancy.
- Used for a GPS navigation system, water, and electricity gas meter reading system.
- With the computer and Bluetooth adapter, PDA, seamless connection equipment.
- Bluetooth module HC-08 Master and slave Two in one module.
- Use the CSR mainstream Bluetooth chip, Bluetooth V2.0 protocol standards.
- Potter default rate of 9600, the user can be set up.
- Bluetooth protocol: Bluetooth Specification v2.0+EDR
- Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps.
- Security: Authentication and encryption.
- Profiles: Bluetooth serial port.
J-link Emulator V8 all-ARM JTAG Adapter Converter for TQ2440 MINI2440 K98
Text to Speech TTL Module (Serial to Speech)
- Single row 0.1″ header for easy connection to a host system
- Power requirements: +5 VDC
- 30 mA idle
- 46-220 mA active (depending on speech parameters and output load)
- Communication: Asynchronous 9600 bps serial (8N1)
- Dimensions: 1.25″x1.5″x0.37″
-
Text support rate is better
-
Interface operation is simpler
-
5V single power supply.
-
Output directly connected to the speaker, can drive 4 ohms 3W / 8 ohm 2W speakers
-
Busy status output, can be connected to the microcontroller IO or indicator light, no need to be left floating.
-
Voice effect optimization
-
Module miniaturization and easy integration
-
Dimension: 33*27.5mm
-
With mounting holes

Reviews
There are no reviews yet.