I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
A-to-Mini B USB-2.0 Cable for Arduino Nano
₹100.00 Original price was: ₹100.00.₹80.00Current price is: ₹80.00. inc. GST
- USB Type: Type-A to Mini-B
- Weight: 100 gm.
- Length: 1.35 m.
- Nickel-Plated Connector
- Exclusively designed for Arduino boards.
- Exclusively designed for Arduino boards.
- Mini-USB cables are designed to connect from the USB port on a hub, PC or Mac to a USB device, including digital cameras, mobile phones, and PDAs.
This is USB 2.0 A to USB 2.0MINI B Cable For Arduino Nano (USB A to Mini B) used speed-critical devices, such as external hard drives and smartphones, and peripherals that require a Mini-B connection to your computer. It allows you to connect your Arduino Board which features a Mini-B USB port to the Laptop/PC. It transfers data at a rate up to 480 Mbps. Connect a peripheral with a 5-Pin Mini-USB port to a USB Hub or USB port on PC/Mac. Compatible with USB 1.0, 1.1 and 2.0. PC and Mac compatible. This cable with Nickel Plated Connector is the plug-and-play connection cable with MP3 players, digital cameras and PDAs, External Hard Drives.
Using cheap USB cables or faulty USB cables may harm external devices and cause errors continuously. For the error-free and long life of devices, highly recommended to use high-quality USB2.0 A to USB2.0Mini B cables. These cables are convenient to use at an affordable price. Moreover, these high-quality USB cables used to transmits data at high speeds up to 480Mbps with the error-free, high-performance transmission. This Arduino cable comes with molded strain relief and PVC over-molding to ensure a lifetime of error-free data transmissions. An Aluminum covering under the mold shield helps meet FCC requirements on KMI/RFI interference. Moreover, Foil and braid shield comply with fully rated cable specifications reducing EMI/FRI interference.

Related products
2 CHANNEL 5V RELAY
- High current relay
- Two LED S to indicate relays ON/OFF status
- Low-level trigger expansion board
- Opto isolation circuitry
- Works with logic level signal 3.3V or 5V devices
- Can be used as normally open (NO) or normally closed (NC)
- Back EMF protection
- Ensures diode current protection
- AC control voltage: 250v @mx10A
- DC control voltage: 30V @max 10A
- Easy installation and fixing
4*4 MATRIX KEYPAD
- The maximum current across each button: 3mA
- Easy communication with any microcontroller
- Ultra-thin design
- Adhesive backing provides easy integration
- High price-performance ratio
- Allows microcontroller to scan 8 output pins to check which 16 button
- Long life
- Maximum operating temperature: 0 degrees to 50 degrees Celsius
- Dimension: 70*77*1mm
- Weight: 7.5gm
DVD Component Cable
HDMI Male to VGA Female Converter Adapter 1080P For PC, Rspberry Pi
- Support HD resolution, super clear picture, fast transmission speed
- The maximum signal range up to 1920 X 1200, 1080p;
- Video input signal: 5Volts p-p(TTL) ;
- Support VGA video bandwidth: 10 bit, 162MHz
- Video amplifier bandwidth: 162MHz
- Support resolution up to 1920 X 1200, reduce blank signal during transmit.
- No external power supply, plug, and play.
Optical Fiber Audio/Video Cable
PL2303 USB TO TTL CONVERTER
- USB specification 2.0 compliant with full-speed 12Mbps.
- Operation Level-Digital 5V
- Power Supply-External 5V
- Standard USB type A male and TTL 6pin connector.
- 6 pins for 3.3V, RST, TXD, RXD, GND & 5V.
- All handshaking and modem interface signals.
- Baud rates: 300 bps to 1.5 Mbps.
- Byte receives buffer; 640 bytes transmit buffer.
- Hardware or X-On/X-Off handshaking supported.
- Event character support Line break transmission.
- USB suspend states supported via SUSPEND pins.
- Supports Windows 98SE, 2000, XP, Vista, Window7, Mac OS 9, Mac OS X & Linux 2.40.
- Simple serial communication.
- Router or ADSL firmware upgrade.
- Easy to use, RX to the MCU's TX; TX to the MCU's RX. and then connected to the GND. Without having to use the MAX232 conversion.
USB 2.0 TO SERIAL CONVERTER CABLE
Xmate Zorro Wired USB Gaming Mouse for PC/Laptop/Mac – (Black)
- PC GAMING MOUSE COMPATIBILITY: Windows 10/8/7/Vista/XP/Win98SE/Win2000, Limited Mac OS support Works well with all major Computers/Laptop brands Asus, Dell, Hp, Lenovo, Dell, MSI and others
- Mechanical Button: 6 Buttons with different functions like the previous page and next page. If you wish you can turn on/off the colorful lights (press next page key + DPI key)
- 4 DPI Levels: Four color RGB breathing light cycle replacement. 4-type DPI rating controlled by touching the DPI button - Violet 800/Blue 1200/Purple 1600/Red 3200
- Excellent Performance with High Polling Rate: Xmate Zorro wired gaming mouse with 500Hz high polling rate ensures smooth movement offers reliable connectivity with smooth and responsive tracking
- Ergonomic Gamer Mouse: Made of ABS plastic, leather collar, anti-skid scroll wheel, rubber finish with mechanical switches & 1.5m nylon tough cable that stand up to tough gaming needs like FPS/PUBG/COD, etc
- 1-year warranty from the date of purchase, contact us at 040-67138844 (9am - 6pm, Monday to Friday & Saturday 9am - 1pm)
- Country of Origin: China

Reviews
There are no reviews yet.