I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
ADP3188 6-Bit Programmable 2 or 3 or 4-Phase Synchronous Buck Controller IC
₹60.00 Original price was: ₹60.00.₹55.00Current price is: ₹55.00. inc. GST
- 6-Bit Programmable 2-/3-/4-Phase Synchronous Buck Controller
- Selectable 2-, 3- or 4-phase operation at up to 1 MHz per phase
- ±9.5 mV worst-case differential sensing error over temperature
- Logic-level PWM outputs for interface to external high power drivers
- Active current balancing between all output phases
- Built-in power good/crowbar blanking supports on-the-fly VID code changes
- 6-bit digitally programmable 0.8375 V to 1.6 V output
- Programmable short-circuit protection with programmable latch-off delay
An ADP3188 designed as a multiphase synchronous buck switching regulator controller with great efficiency. This IC is designed to convert a 12 V main supply to the core supply voltage required by Intel CPUs with excellent performance. This controller IC comes with an integrated 6-bit DAC that allows it to read a voltage identification (VID) code from the processor and set the output voltage between 0.8375 V and 1.6 V. In addition, the logic level outputs are driven by a multimode PWM design with a customizable switching frequency that is optimized for VR size and efficiency. The 2, 3, or 4-phase operation of the IC are performed via programming the output signals phase relationship, allowing up to four complementary buck switching stages to be built.
The ADP3188 also comprises of programmable no-load offset and slope capabilities. Thereby modify the output voltage as a function of the load current, ensuring that it is always in the best position for a system transient. The ADP3188 also has configurable current limiting and accurate and dependable short circuit protection. Also included is a delayed Power Good output that allows the CPU to request on-the-fly output voltage modifications. ADP3188 is a 28-lead TSSOP package designed to operate in a commercial temperature range of 0°C to 85°C.
Once normal operation begins, the ADP3188’s PWM outputs function as logic-level devices. The detection is normal, and it’s designed to power external gate drivers like the ADP3418. Because each phase is monitored independently, operation with a duty cycle approaching 100% is conceivable. For overlapping phases, more than one output can be turned on at the same time.
APPLICATIONS
Desktop PC Power Supplies for:
- Next Generation Intel® Processors
- VRM Modules

Related products
120pcs 12 value 1uF-470uF Electrolytic Capacitor Kit 1UF 2.2UF 3.3UF 4.7UF 10UF 22UF 33UF 47UF 100UF 220UF
120pcs 12 values 0.22UF-470UF Aluminum electrolytic capacitor assortment kit set pack
5-36v Switch Drive High-power MOSFET Trigger Module
- Operating Voltage: DC 5V - 36V;
- The trigger source: digital high-low (DC3.3V - 20V), can be connected microcontroller IO port, PLC interfaces, DC power, you can access the PWM signal, the signal frequency 0--20KHZ perfect support.
- Output capacity: DC 5V - 36V, at room temperature, continuous current 15A, power 400W! Lower auxiliary cooling conditions, the maximum current up to 30A.
- Applications: You can control the output of power equipment, motors, light bulbs, LED lights, DC motors, micro-pumps, solenoid valves, etc.. You can enter
- PWM, motor speed control, lamp brightness.
- Availability: unlimited switch
- Operating temperature: -40-85
- Dimension: 34mm x 17mm x 12mm
- The use of imported dual-MOS parallel active output, lower resistance, more current, strong power at room temperature, 15A, 400W, to meet the most use of the equipment
- Wide voltage, the perfect support for PWM
- Easily control high power devices
- Input PWM to achieve motor speed control, lamp brightness control
AP Extension pigtail SMA female socket jack to UFL IPX Connector
Capacitor Touch Dimmer, Constant Voltage LED Stepless Dimming, PWM Control Board
- Voltage range: 4V to 5V
- Maximum output current: 500mA
- Hole distance: 16 mm
- Aperture: 5 mm
- The lamp brightness can be adjusted by requirement, it is very to operate.
- It can touch in medium protection, such as glass, acrylic, plastic, ceramics, and so on, which is very safe.
- Anti power and phone interference, the EFT can reach above +/-2KV; the touch response sensitivity and reliability will not be affected by the close distance or multi-angle mobile phone interference.
- Dimming mode: Non-polar PWM dimming.
- PCB size: 23 x 20mm
GSM Antenna
TP5100 4.2v 8.4v Single Double Lithium Battery Charge Management Li-ion Battery Compatible 2A Charging Board
- Input voltage: 5-15V DC power supply.
- Charge status: full and unloaded blue lights, charging red.
- Double 8.4v / 4.2v lithium rechargeable single .
- Programmable charge current. 0. 1A-2A .
- Programmable steady precharge current 10% -100%.
- Wide operating voltage, maximum reach I8V.
- Red and green LED charge status indicator.
- Chip temperature protection, overcurrent protection, under voltage protection.
- Battery temperature protection, reverse battery shutdown, short circuit protection.
- Switching frequency 400Khz, usable inductance 20uH and more.
- PWR_ON Power battery for switching control.

Reviews
There are no reviews yet.