I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
BD-NN300F-LS Laser Diffuse Photo Sensor
-
Type: Laser Diffuse Reflective Photo Sensor
-
Model: BD-NN300F-LS
-
Sensing Distance: 300 mm
-
Light Source: Visible Red Laser
-
Output Type: NPN
-
Compact, durable, and easy to install
-
High response speed and stable detection
-
Ideal for precision detection in automation lines, conveyors, and robotic systems
Description
The BD-NN300F-LS is a high-precision laser diffuse photo sensor designed for accurate object detection in industrial automation systems. With its advanced laser sensing technology, it ensures reliable performance even with small or low-contrast targets. This sensor offers a 300 mm sensing range, making it ideal for short to mid-range detection applications where precision and speed are critical.
Built with a compact and durable housing, the BD-NN300F-LS provides excellent resistance to vibration and environmental factors. Its visible red laser beam simplifies alignment and installation. The sensor supports NPN output and operates on a wide voltage range, making it compatible with various industrial controllers and PLCs.
Applications:
-
Industrial automation equipment
-
Position and object detection
-
Packaging and assembly lines
-
Robotics and conveyor systems
Reviews (0)
Shipping & Delivery
Related products
Arduino CNC Shield
- Shield type:Â Arduino Nano
- Firmware:Â GRBL
- Modular stepper motor drivers:Â 3
- Limit switches:Â 6
- Micro-stepping:Â 1/16
- Coolant enable
- Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825, and others) (Not Included)
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
- Please note that this is an unassembled kit and needs soldering.
- Latest Arduino CNC Shield Version 3.51
Arduino LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino
- Microcontroller: ATmega168 or ATmega328V
- Operating Voltage: 2.7-5.5 V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40 mA
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
- The back side of the LilyPad is now completely flat!
TB6560 4 Axis Cnc Controller 4 Axis Stepper Motor Driver DSP Controlled 3.5A 24V
- Rated maximum output: ± 4.5A, 40V, Peak 5A, low output impedance, source 0.5?,
- the receiving end of 0.4?, low voltage shutdown, thermal parking and circulation.
- circuit protection. After I design, you can set the current output of 0.5A 1A 1.8A 2.5A.
- 3.3A 4A 4.5A to accommodate more and different motor Current.
- The drive is suitable software mach2, mach3, (mach3 have support WIN7 system), KCAM4 like.
Text to Speech TTL Module (Serial to Speech)
-  Single row 0.1″ header for easy connection to a host system
- Power requirements: +5 VDC
- 30 mA idle
- 46-220 mA active (depending on speech parameters and output load)
- Â Communication: Asynchronous 9600 bps serial (8N1)
- Dimensions: 1.25″x1.5″x0.37″
-
Text support rate is better
-
 Interface operation is simpler
-
5V single power supply.
-
Output directly connected to the speaker, can drive 4 ohms 3W / 8 ohm 2W speakers
-
Busy status output, can be connected to the microcontroller IO or indicator light, no need to be left floating.
-
 Voice effect optimization
-
 Module miniaturization and easy integration
-
Dimension: 33*27.5mm
-
With mounting holes
Reviews
There are no reviews yet.