I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-27%
ZY-204 1660 Points Solderless Breadboard
Original price was: ₹820.00.₹650.00Current price is: ₹650.00. inc. GST
24V/12V to 5V 5A Power Module DC-DC XY-3606 Power Converter
Original price was: ₹1,775.00.₹1,500.00Current price is: ₹1,500.00. inc. GST
Bluetooth XBee USB Adapter FT232RL for Arduino with Cable
Original price was: ₹1,300.00.₹950.00Current price is: ₹950.00. inc. GST
- IC Chip: FT232RL
- Input Supply Voltage: 3.3 ~ 5 VDC
- Connectivity: USB
- Communication Protocol: UART, Bit Bang I/O, SPI
- Cable Length: 30cm
- Board Dimensions: 42x26x6mm
- Interface: Mini-B USB, 2.54mm pitch pin header.
- Adapter socket: XBee compatible 2.0mm pitch female pin header.
- 3V and 5V IO compatible.
- USB 2.0 protocol.
- Easily connected to a PC via mini USB cable.
- XBee-setting support software X-CTU.
Description
The Bluetooth XBee USB Adapter FT232RL for Arduino + Micro USB Cable is designed as a compact USB with a serial adapter equipped with BEE (20pin 2.0mm) sockets. This USB adapter module with integrated FT232RL IC. This IC is used for programming or communicating with the board which is basic Arduino but without a USB interface, like Sniffer Nano. Meanwhile, we can also easily connect your PC to various wireless applications via the BEE-compatible modules. Hence the Adapter also could support the XBee interface.
Bluetooth Bee is defined as a simple breakout board for the Bluetooth Module, with a pin distance of 2.0mm. And compatible with all XBee interfaces and XBee modules, specifically for transparent wireless serial connection setup.  This Bluetooth module is configured to master and slave mode, and the user can set many detailed parameters via AT commands. This Bluetooth Bee V03 Shield Board is designed for easy plug into the ARDUINO development board. Hence coupled easily with the Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices to communicate wirelessly. Whereas when Coupled with the XBee module, enables the communication between two or more units Arduino, or Arduino with PC.
The XBee adapter boards offer various advantages to the XBee modules such as breadboard-friendly standard 0.1-inch pin spacing, mounting holes, and easy-to-solder connections. Under certain cases, even if we are communicating point-to-point without a PC, highly recommended to always use at least one XBee USB Adapter Board. Hence you can easily configure and test each XBee module prior to putting it in a point-to-point application.
Applications:
- Â PC via a USB cable directly connected with XBee adapters.
- Bluetooth Bee configures or uses it as data transmission.
- Â For ARDUINO BOARD PRO MINI Downloader.
Reviews (0)
Shipping & Delivery
Related products
16 CHANNEL 5V RELAY
- 16 channel 5V relay board
- Operating voltage: 5V
- Supply current: 500mA
- Relay contact current capacity of 10A @250 V AC/10A@ 30V AC
- Optocoupler protection
- Low state voltage: 0V to 0.5V (relay is ON)
- High state voltage: 3.7V to 5V(relay is OFF)
- Single-chip design with reliable performance
- Strong anti-interferences
- Strong anti-jamming ability and stable performance
- The on-board power supply module doesn’t need any external power
- Common terminal(com) in each rely is user friendly and can be accessed by different signal
- Dimension: 180*90*20mm
- Weight: 100gm
4 CHANNEL 5V RELAY
- 4-Channel relay interface board
- Operating voltage range: 3.3V to5V
- Maximum current: 10A
- Supply current: 20 mA
- High current relay of 10A @250 V AC/10A@ 30V DC
- Control signal: TTL level
- For quick and easy connection high-quality screw terminals provided
- Pull-down circuit to avoid malfunction
- Power supply indicator
- Can control both AC & DC appliances such as DC motors, solenoid valves, lamps, etc.
- LED status indicates relay ON/OFF state.
- Standard interface that can be controlled by a microcontroller (Arduino, 8051, PIC, AVR, DSP, ARM)
- For easy accessibility input signal pin connected to burg sticks
- Operating temperature: -40 to 85 degrees Celsius
- Dimension: 76*56*17mm
- Weight: 7gm
8 CHANNEL 5V RELAY
- Relay operating voltage: 5V
- 8 channel
- High impedance controller pin
- One normally closed contact and one normally opened
- Useful for appliances control
- Power supply indicator and control indicator lamp
- Pull-down circuit to avoid malfunction
- Can control both DC and AC to 220v AC load
- Works with both 3.3 V and 5 V logic with the less current drive
- 3 terminals per SPDT relay
- Standard interface can be directly controlled by a microcontroller like Arduino, 8051, AVR, PIC, DSP, ARM, MSP430, TTL logic
- Dimension: 7*6.4*1 inch
CURRENT SENSOR ACS712 30AMPS
- Current sensor chip: ACS712ELC-30A
- Supply voltage: 4.5V to 5.5V DC
- Current range: -30A to 30A
- Sensitivity: 66 millivolt/ampere
- Low noise analogue signal path
- Output rise time: 5 micro sec
- Extremely stable output offset voltage
- Zero magnetic hysteresis
- Factory trimmed for accuracy
- Easy to interface with a microcontroller, since it outputs an analogue voltage
- Onboard power indicator
- Dimension: 7*5*5cm
- Weight: 400gm
DC-DC BOOST MODULE 0.9V-5V/5V 600MA USB MOBILE Power Supply Module
- Ultra-compact PFM chip
- Module properties: nonisolated step-up module
- Input voltage: 1v-5v
- Output voltage: 5.1v-5.2V
- Output current: rated 1A-1.5A
- Efficiency: 96%
- Output ripple: 30mv for 20M bandwidth
- Switching frequency: 500khz
- Voltage indication for led lights with load( for less than 2.7v led indicator off)
- Operating temperature:-40 degrees to 85 degrees Celsius
- Full load temperature rise: 30 degrees Celsius
- Quiescent current: 130ua
- Load regulation: +/-1%
- Voltage regulation: +/-0.5%
- Dynamic response speed: 5% 200Us
- Short circuit protection
- Reverse polarity protection
- Dimension: 2.5*1.8*1.8gm
- Weight: 400gm
HC-06 RF Wireless Bluetooth Bee V2.0 Module Xbee V03 Shield Board Arduino
- Power supply: 3.3V
- A power supply of more than 3.3V will destroy the module.
- Paring user’s name: HC-05
- Default baud rate: 9600
- Default slave model
- Default pairing password: 1234
- It can be used for an MCU system whose voltage is 3.3V.
- Users can set baud rate, paring password, and user’s information by AT command.
- Bluetooth adapter pairs with Bluetooth Bee salve device.
- With an efficient onboard antenna, the exposed antenna qualifies the transmit signal and make it farther.
- Be used with for Arduino Bluetooth Bee module, it can communicate with other Bluetooth device wireless
- Be used with Xbee module to achieve communication between more than two for Arduinos or communication between for Arduino and PC
- Dimension: : 3.3 x 2.5 x 0.9 cm
- Weight: 5g
Xbee Pro S2C Module XBP24CZ7WIT-004
- Operating voltage: 2.7V-3.6V
- Max data rate: 250kbps
- 63mW output (+17dBm)
- Range: 1 mile (1600m)
- ADC Channels: 6 10-bit ADC input pins
- Digital I/O: 8
- 128-bit encryption
- Transmit Current: 120mA at 3.3VDC
- Receive current: 31mA at 3.3VDC
- Data Rate: RF 250Kbps, serial up to 1Mbps
- Indoor/urban range up to 300ft (90m)
- outdoor/RF line of sight range up to 2miles (3200m)
- Transmit power is 63mW (+18dBm)
- Receiver sensitivity is -101dBm
- Local or over-air configuration
- AT or API command set
- External Antenna Required
- Firmware upgrades via UART, SPI or over the air (OTA)
- ISM 2.4GHz frequency band, DSSS (direct sequence spread spectrum) interference immunity
- Dimension: 2.438cm x 3.294cm
Reviews
There are no reviews yet.