I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
CHINT NCK3‑40 Definite Purpose Contactor
NCK3-40-3-SM Definite Purpose Contactor
-
Brand: CHINT
-
Type: Definite Purpose Contactor
-
Rated Current: 40A
-
Poles: 3 Pole (3P)
-
Category: AC-1 / AC-8a
-
Rated Insulation Voltage: 630V
-
Coil Voltage: Varies by model (confirm variant)
-
Application: HVAC, compressors, industrial control panels
-
Features: Compact design, high durability, reliable switching, easy panel mounting.
Description
✅ Key Specifications
-
Model: NCK3-40 series (40 A rated) in the family of definite purpose contactors. Moglix+4Chint Global+4Shreenath Technolab+4
-
Rated current (main contacts): 40 A. Moglix+3Industry Buying+3Chint Global+3
-
Poles: 3-pole (3P) version is common. Moglix+2Chint Global+2
-
Utilization categories: AC-1, AC-8a (suitable for HVAC/R and general industrial control) Chint Global+1
-
Rated insulation voltage: 630 V. Chint Global+1
-
Available coil/control voltages: examples include 24 V AC coil version. Moglix
-
Ambient conditions: Rated for –5 °C to +40 °C, altitude ≤ 2000 m, pollution degree 2. Chint Global+1
-
Mounting and connection details: For example, copper wire rigid 4–10 mm² for main circuit in this current rating bracket. Shreenath Technolab+1
Reviews (0)
Shipping & Delivery
Related products
Arduino LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino
- Microcontroller: ATmega168 or ATmega328V
- Operating Voltage: 2.7-5.5 V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40 mA
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
- The back side of the LilyPad is now completely flat!
ESP8266 WIFI Industrial stable version A full test board cloud function test Black board T5
- Support 802.11b / n / g wireless standard
- Independent development MCU platform
- High cost performance
- Support UART / GPIO data communication interface
- Support STA / AP / STA + AP coexistence mode of operation
- Support SmartLink intelligent networking (APP)
- Support wireless upgrade firmware
- Support WPS network configuration
- Built-in onboard antenna &Temperature and humidity sensor
- RGB three-color light adjustable
- Provide rich AT command set configuration
- Free AiCloud cloud service for debugging
- 3 AA batteries / 5V adapter power supply
- Size: 61.6mm x 56.2mm;
TB6560 4 Axis Cnc Controller 4 Axis Stepper Motor Driver DSP Controlled 3.5A 24V
- Rated maximum output: ± 4.5A, 40V, Peak 5A, low output impedance, source 0.5?,
- the receiving end of 0.4?, low voltage shutdown, thermal parking and circulation.
- circuit protection. After I design, you can set the current output of 0.5A 1A 1.8A 2.5A.
- 3.3A 4A 4.5A to accommodate more and different motor Current.
- The drive is suitable software mach2, mach3, (mach3 have support WIN7 system), KCAM4 like.
Text to Speech TTL Module (Serial to Speech)
- Single row 0.1″ header for easy connection to a host system
- Power requirements: +5 VDC
- 30 mA idle
- 46-220 mA active (depending on speech parameters and output load)
- Communication: Asynchronous 9600 bps serial (8N1)
- Dimensions: 1.25″x1.5″x0.37″
-
Text support rate is better
-
Interface operation is simpler
-
5V single power supply.
-
Output directly connected to the speaker, can drive 4 ohms 3W / 8 ohm 2W speakers
-
Busy status output, can be connected to the microcontroller IO or indicator light, no need to be left floating.
-
Voice effect optimization
-
Module miniaturization and easy integration
-
Dimension: 33*27.5mm
-
With mounting holes
Reviews
There are no reviews yet.