I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
C&S TC1D2510 Power Contactor
C&S TC1D2510 Power Contactor
– 25A, 3-pole contactor for reliable motor and load control. Compact design, long life, and high performance for industrial use.
C&S TC1D2510 Power Contactor
The C&S TC1D2510 is a high-performance power contactor designed for reliable control of electric motors and other heavy-duty electrical loads. Built with advanced engineering and durable materials, this contactor ensures excellent electrical conductivity, long operational life, and consistent performance under demanding industrial conditions.
Key Features:
-
Model: TC1D2510
-
Brand: C&S Electric
-
Rated Current: 25A
-
Voltage Rating: 230V / 415V AC (varies by coil type)
-
Poles: 3 Pole
-
Auxiliary Contact: 1 NO (Normally Open)
-
Frequency: 50/60 Hz
-
Mounting Type: DIN rail or panel mounting
-
Conformance: IEC/EN 60947-4-1
-
Applications: Motor control, lighting, heating, and switching of resistive or inductive loads
Benefits:
-
Compact design for easy installation in control panels
-
High mechanical and electrical endurance
-
Low power consumption coil
-
Compatible with overload relays for motor protection
-
Reliable performance in harsh industrial environments
Typical Uses:
Ideal for industrial automation systems, motor starters, HVAC systems, control panels, and power distribution setups where dependable switching and control are essential.

Related products
Arduino CNC Shield
- Shield type: Arduino Nano
- Firmware: GRBL
- Modular stepper motor drivers: 3
- Limit switches: 6
- Micro-stepping: 1/16
- Coolant enable
- Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825, and others) (Not Included)
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
- Please note that this is an unassembled kit and needs soldering.
- Latest Arduino CNC Shield Version 3.51
Creality CR-5 Pro 3D PRINTER/300*325*380mm/multiple materials supported
ESP8266 WIFI Industrial stable version A full test board cloud function test Black board T5
- Support 802.11b / n / g wireless standard
- Independent development MCU platform
- High cost performance
- Support UART / GPIO data communication interface
- Support STA / AP / STA + AP coexistence mode of operation
- Support SmartLink intelligent networking (APP)
- Support wireless upgrade firmware
- Support WPS network configuration
- Built-in onboard antenna &Temperature and humidity sensor
- RGB three-color light adjustable
- Provide rich AT command set configuration
- Free AiCloud cloud service for debugging
- 3 AA batteries / 5V adapter power supply
- Size: 61.6mm x 56.2mm;
Superbit expansion board for BBC Micro Bit Pocket Sized – Single Board Computer
TB6560 4 Axis Cnc Controller 4 Axis Stepper Motor Driver DSP Controlled 3.5A 24V
- Rated maximum output: ± 4.5A, 40V, Peak 5A, low output impedance, source 0.5?,
- the receiving end of 0.4?, low voltage shutdown, thermal parking and circulation.
- circuit protection. After I design, you can set the current output of 0.5A 1A 1.8A 2.5A.
- 3.3A 4A 4.5A to accommodate more and different motor Current.
- The drive is suitable software mach2, mach3, (mach3 have support WIN7 system), KCAM4 like.
Text to Speech TTL Module (Serial to Speech)
- Single row 0.1″ header for easy connection to a host system
- Power requirements: +5 VDC
- 30 mA idle
- 46-220 mA active (depending on speech parameters and output load)
- Communication: Asynchronous 9600 bps serial (8N1)
- Dimensions: 1.25″x1.5″x0.37″
-
Text support rate is better
-
Interface operation is simpler
-
5V single power supply.
-
Output directly connected to the speaker, can drive 4 ohms 3W / 8 ohm 2W speakers
-
Busy status output, can be connected to the microcontroller IO or indicator light, no need to be left floating.
-
Voice effect optimization
-
Module miniaturization and easy integration
-
Dimension: 33*27.5mm
-
With mounting holes

Reviews
There are no reviews yet.