I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Delta CliQ II series DIN rail power supplies
📋 Example Specification (model DRP024V480W1BA)
Here’s a detailed breakdown for one model in the series (24 V, 480 W) to illustrate what you can expect; use this as a baseline for other models (like the 48 V / 240 W one). deltapsu.com+1
| Parameter | Value |
|---|---|
| Output voltage | 24 Vdc deltapsu.com |
| Output current | 20 A deltapsu.com |
| Output power | 480 W deltapsu.com+1 |
| Input voltage range | 85–264 Vac, or 120–375 Vdc Mouser Electronics+1 |
| Efficiency | > 91% @ 115 Vac, > 92% @ 230 Vac (for this model) deltapsu.com |
| Dimensions (H × W × D) | 121 mm × 144 mm × 118.6 mm deltapsu.com |
| Unit weight | 1.37 kg deltapsu.com |
| Operating temperature | –25 °C to +75 °C (cold start to –40 °C) deltapsu.com |
| Protection / Certifications | Over-voltage, over-current, over-temperature protections; SELV output; ATEX/Class I Div 2 variant available. deltapsu.com+1 |
Description
Delta CliQ II series DIN rail power supplies
Key Features
-
Wide / universal AC input: 85–264 Vac (and DC input 120–375 Vdc) for many models. Mouser Electronics+2deltapsu.com+2
-
No power de-rating for full input voltage range (for many models). deltapsu.com+1
-
High efficiency: typically > 90% at full load. deltapsu.com+1
-
Power boost capability: e.g., 150% of rated power for 5 seconds and 200% for 2 seconds on some models. deltapsu.com+1
-
Rugged design: full aluminium housing, conformal coating on the PCB to enhance resistance against dust/chemicals, wide temperature range, and DIN-rail (TS35) mounting. Mouser Electronics
-
Safe and industrial certifications: e.g., SELV output, IP20 protection, models with ATEX/Class I Division 2 variants. deltapsu.com
- https://www.mathaelectronics.com/
Reviews (0)
Shipping & Delivery
Related products
Arduino LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino
- Microcontroller: ATmega168 or ATmega328V
- Operating Voltage: 2.7-5.5 V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40 mA
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
- The back side of the LilyPad is now completely flat!
Creality CR-5 Pro 3D PRINTER/300*325*380mm/multiple materials supported
• Print Size: 300*225*380mm
• Machine Size: 530*487*612mm
• Package Szie： 625*547*710mm
• Filament diameter: 1.75 mm PLA/ABS
• File Format: STL/OBJ/AMF
• Layer Heigh: 0.1-0.4mm
• Sicer software: Creality Slicer, Cura, Simplify3D, Repetier-Host
• Connectivity: Online/SD card
• Mainboard: ATmega2560 Silent board
• UI interface: 4.3inch touch screen
HC-06 4Pin Bluetooth Module Without Reset Switch
- Working current: matching for 30 mA, matching the communication for 8 mA.
- Dormancy current: no dormancy.
- Used for a GPS navigation system, water, and electricity gas meter reading system.
- With the computer and Bluetooth adapter, PDA, seamless connection equipment.
- Bluetooth module HC-08 Master and slave Two in one module.
- Use the CSR mainstream Bluetooth chip, Bluetooth V2.0 protocol standards.
- Potter default rate of 9600, the user can be set up.
- Bluetooth protocol: Bluetooth Specification v2.0+EDR
- Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps.
- Security: Authentication and encryption.
- Profiles: Bluetooth serial port.
Text to Speech TTL Module (Serial to Speech)
-  Single row 0.1″ header for easy connection to a host system
- Power requirements: +5 VDC
- 30 mA idle
- 46-220 mA active (depending on speech parameters and output load)
- Â Communication: Asynchronous 9600 bps serial (8N1)
- Dimensions: 1.25″x1.5″x0.37″
-
Text support rate is better
-
 Interface operation is simpler
-
5V single power supply.
-
Output directly connected to the speaker, can drive 4 ohms 3W / 8 ohm 2W speakers
-
Busy status output, can be connected to the microcontroller IO or indicator light, no need to be left floating.
-
 Voice effect optimization
-
 Module miniaturization and easy integration
-
Dimension: 33*27.5mm
-
With mounting holes
WH0201102 ABS 1.75 mm 1 kg Filament-Wanhao
- Material: ABS
- Color: White
- Material Diameter: 1.75mm
- Printing Temperature: 220° to 230°C
- Roundness Accuracy: +/- 0.5mm +/- 0.5mm
- Density: 1.31g/cm3 1.01g/cm3
- Mounted: Spool Mounted
- Net weight: 1kg
- Packaging Vacuum-sealed with desiccant to protect the filament from humidity
- Highly Detailed & Quality Outputs.
- Tried and Tested by Makenica.com
- Compatible with any FDM 3D Printer.
- ABS is stronger than PLA
- Easy to post-process.
- Environment friendly – ISO 9001 and ROHS certified
Reviews
There are no reviews yet.