I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Delta PMT‑2 Series SMPS
📋 Typical Specifications (example model)
Using the model PMT-12V100W2BA as a reference: deltapsu.com+1
-
Output Voltage: 12 V
-
Output Current: 8.5 A
-
Output Power: ~102 W
-
Output Voltage Adjustment Range: ~10.8 – 13.2 V
-
Input Voltage Range: 90 – 264 Vac
-
Efficiency: ~87.5% typ. @ 230 Vac
-
Hold-up time: ~42 ms @ 230 Vac
-
Ripple / Noise: <120 mVpp (0 °C to 70 °C)
-
Dimensions: 129 × 97 × 30 mm
-
Weight: ~0.285 kg
-
MTBF: >700,000 hrs (Telcordia SR-332)
-
Protections: Short circuit (hiccup, non-latching), Overload/Overcurrent (auto recovery), Over-temperature (latch)
Another example: PMT-24V350W2BR (higher power version) gives ~350.4 W, 24 V output, 14.6 A current, selectable input 90-132 / 180-264 Vac, dimensions 215×115×30 mm.
✅ Key Features
-
Low-profile panel mount design: height ≤ 30 mm, making it compact and suitable for space-constrained installations. Mouser Electronics India+2deltapsu.com+2
-
Wide AC input range: typically 90-264 Vac (universal) for most models. Mouser Electronics India+1
-
Operating temperature range from around –30 °C to +70 °C (some models support cold-start at –40 °C) — good for harsh industrial environments. Mouser Electronics India+1
-
Output voltage options typically from 12 V, 15 V, 24 V, 36 V, 48 V. analogcorporation.in+2indmall.in+2
-
Safety and compliance: Household appliance approvals (IEC/EN 60335-1, IEC/EN 61558-1/-2-16) for many models, high MTBF >700,000 hours. deltapsu.com+1
-
Very low no-load power consumption (<0.3 W for many models) — good for efficiency/energy saving. Mouser Electronics India
📋 Typical Specifications (example model)

Related products
2K2pf 2KV High Voltage Disc Capacitor (10 pcs)
Arduino CNC Shield
- Shield type: Arduino Nano
- Firmware: GRBL
- Modular stepper motor drivers: 3
- Limit switches: 6
- Micro-stepping: 1/16
- Coolant enable
- Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825, and others) (Not Included)
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
- Please note that this is an unassembled kit and needs soldering.
- Latest Arduino CNC Shield Version 3.51
Creality CR-5 Pro 3D PRINTER/300*325*380mm/multiple materials supported
ESP8266 WIFI Industrial stable version A full test board cloud function test Black board T5
- Support 802.11b / n / g wireless standard
- Independent development MCU platform
- High cost performance
- Support UART / GPIO data communication interface
- Support STA / AP / STA + AP coexistence mode of operation
- Support SmartLink intelligent networking (APP)
- Support wireless upgrade firmware
- Support WPS network configuration
- Built-in onboard antenna &Temperature and humidity sensor
- RGB three-color light adjustable
- Provide rich AT command set configuration
- Free AiCloud cloud service for debugging
- 3 AA batteries / 5V adapter power supply
- Size: 61.6mm x 56.2mm;
TB6560 4 Axis Cnc Controller 4 Axis Stepper Motor Driver DSP Controlled 3.5A 24V
- Rated maximum output: ± 4.5A, 40V, Peak 5A, low output impedance, source 0.5?,
- the receiving end of 0.4?, low voltage shutdown, thermal parking and circulation.
- circuit protection. After I design, you can set the current output of 0.5A 1A 1.8A 2.5A.
- 3.3A 4A 4.5A to accommodate more and different motor Current.
- The drive is suitable software mach2, mach3, (mach3 have support WIN7 system), KCAM4 like.

Reviews
There are no reviews yet.