I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-3%
Tenda N300 Wireless Router
Original price was: ₹1,500.00.₹1,300.00Current price is: ₹1,300.00. inc. GST
1.5 Inch DC Fan 5V
Original price was: ₹100.00.₹85.00Current price is: ₹85.00. inc. GST
MECO DIGITAL CLAMPMETER
Original price was: ₹5,000.00.₹4,850.00Current price is: ₹4,850.00. inc. GST
Related products
1000-4x HSS Flute Countersink Drill Bit Screw Woodworking Chamfer Home War
- Suitable for all hand and power drills
- Suitable for hardness lower material, such as wood
- 5 Flutes chamfering device Drill bit
- Material: HSS
- Surface treatment: Titanium
- Suitable for all Woods and Soft Metals.
- Four piece set includes bits for drilling location holes for screw sizes 3mm, 4mm, 5mm, 6mm.
- Adjustable counter sleeve depth with wrench.
- Drill and countersink for wood screws without changing bits.
- Drilling length can be adjusted for various length screws simply by loosening and tightening the setscrew.
3 Wires 0.28 inch Digital Voltmeter DC 0-100V Red Light LED Panel Voltage Meter
- Display ON Voltage: 3 V
- Measurable Voltage Range: 0 to 100V
- Current Consumption: 10 mA
- Refresh Speed: 200ms (one time)
- Minimum Input: 3 V
- Highest Input: 30 V
- Accuracy: 0.1 V
- Colour: Red
- Wires: 3
- Operating Temperature: -10 to 60 degrees C
- Holes for Mounting: 3 mm
- Very small and lightweight voltmeter module.
- Very handy and easy to use.
- Red LED display.
- Best operates in the working voltage range of 5V to 24V
- Dimension: 13*30*9mm
- Weight: 3gm
6pcs Hss Titanium Mane Drill Tap Combination Bit – 1/4 Hex Spiral Screw Tap
- Type: Center Drill Bit
- DIY Supplies: Woodworking
- Material: High Speed Steel
- Use: Wood Drilling,
- Shank: 1/4" (6.35mm) hex shank
- Size: 3.175mm, 3.97mm, 4.76mm, 6.35mm, 7.94mm, 9.53mm.
- Complete Hole Drilling
- Tapping And Deburring/Countersinking In One Operation With Power Drill
- Saves labour cost and time
Digital Voltmeter Ammeter DC 0-100V 10A Dual LED Monitor Panel, Red and Blue
- Input Voltage: 4.5V to 30V DC
- Input Current: <= 20mA
- Display Colour: Red (Voltage), Blue (Current)
- Measuring Voltage Range: 0V to 100V DC
- Measuring Current Range: 0A to 10A
- Measurement Accuracy: 1%
- Minimum Voltage Resolution: 0.1V
- Minimum Current Resolution: 0.01A
- Voltage error: ±0.1%
- Current error: ±1%
- Working temperature: -10℃ to 65℃. Blue
- 28’’ device with 5 wires divided into 2 sets.
- Black, Red are for the power supply and 3 wires to measure the Voltage and Current.
- Dimension: 48mm x 29mm x 22mm
HSS Steel Step Cone Drill Titanium Bit Set Hole Cutter Triangular Shank
- Material: high-speed steel
- Super-hard titanium coating lasts up to six times longer than high-speed steel
- Self-starting point starts on contact
- Titanium reduces heat for longer life
- Anti-skid tip eliminates the need for center punching or pilot hole drilling.
- Applicable scope: woodworking punch
- specification: 3/16 1/2 Size: 3/16 1/2 (3/11/5/13/7/11/2) 1/8 1/2 Size: (1/5/37/31/9/35/111/33/13/37/115/31/2mm) 1/4 3/4 Size: (1/5/13/7/11/9/15/11/13/4)
XH-W3001 DC 12V 120W Digital Microcomputer Thermostat Switch
- Rated Current: 10 Amp Max.
- Measurement Input: NTC10K
- Temp Probe Cable Length: 1 Meter
- Power Supply: DC12V
- Load Power: 120W
- Easy to install
- Output type: Direct output
- Output capacity: max 10A
- Temperature setting upper and lower limits
- Temperature measuring range: -50~110°C
- Temperature control range: -50~110°C
- Control precision: up to 0.1°C
- Up key: Press once to display the start temperature. Long press to set start temperature.
- Down key: Press once to display the stop temperature. Long press to set stop temperature.
- Temperature setting upper and lower limits
- Simple operation, suitable for seafood machines.
- Dimensions 60 x 45 x 31 (mm)
- Weight: 55gm
Reviews
There are no reviews yet.