I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
DS1307 64 X 8 Serial Real Time Clock IC
₹55.00 Original price was: ₹55.00.₹45.00Current price is: ₹45.00. inc. GST
- 64 X 8 Serial Real Time Clock
- Supply Voltage range: 4.5V to 5.5V
- Input Logic 1 Min Voltage: 2.2 V
- Input Logic 0 Min Voltage: -0.3V
- Output Logic 0 Max Voltage: 0.4V
- SCL Clock Frequency: 100kHz
- Active Supply Current: 1.5mA
- Rise Time: 1000ns
- Fall Time: 300ns
- Package: DIP-8
DS1307 64 X 8 Serial Real Time Clock IC is an 8 pin device with a full binary-coded decimal (BCD) using 56 bytes of battery-backed SRAM. In this module address and data transferred serially through an I2C, bidirectional bus. The DS1307 operates as a slave device on the I2C bus. The DS1307 RTC module is a low-power clock providing seconds, minutes, hours, day, date, month and year qualified data. It automatically adjusts the end date of each month especially for months with less than 31 days, including the corrections of a leap year.
In the DS1307 RTC module, access obtained by implementing a START condition and providing a device identification code followed by a registered address. Until a STOP condition executed the subsequent registers accessed sequentially. The DS1307 RTC provides a battery back-up function that keeps the clock running even if there is a power failure. RTCs used in a wide range of applications like embedded systems and computer motherboards, etc.
The DS1307 provides an inbuilt power-sense circuit that detects power failures, as a result automatically switches to the backup supply. Timekeeping operation continues even though the module is operating from the backup supply. The DS1307 consists of an external 32.768 kHz crystal. There is no need for any external resistors or capacitors to operate the oscillator.
When VCC falls below 1.25 x VBAT, the device resets the device address counter and terminates access in progress. Inputs to the device will not be recognized at this time to prevent erroneous data from being written to the device from an out-of-tolerance system. Under the condition when VCC falls below VBAT, the device switches into a low current battery-backup mode. As soon as the power-up, the device switches from battery to VCC.

Related products
120pcs 12 value 1uF-470uF Electrolytic Capacitor Kit 1UF 2.2UF 3.3UF 4.7UF 10UF 22UF 33UF 47UF 100UF 220UF
AP Extension pigtail SMA female socket jack to UFL IPX Connector
DC 50A 75mV Current Shunt Resistor for Amp Meter Gauge
HX711–24 Bit Analog to Digital Converter (ADC)
- It is an ADC converter with two differential input channels
- An active-low noise PGA is integrated inside the chip which provides the gain of 32, 64 and 128
- It has a power-on-reset capability which simplifies digital interface initialization.
- All controls to the IC are made through the pins. Programming is not needed.
- You can select a data rate of 10SPS or 80SPS at the output.
- Provides simultaneous supply rejection of 50Hz and 60Hz supply.
- Built-in analog power supply regulator
- The voltage supply range is from 2.6V to 5.5V
- The temperature range is from -40 °C to +85℃
Solid State Relay Module DC To AC SSR-40DA 3-32VDC/24-380VAC 40A
- Control mode: DC-AC
- Input voltage: 3-32V DC.
- Output voltage: 24-380V AC.
- Output current: 40A.
- Working voltage: 250V.
- Material: plastic + metal.
- Loading current: 40A
- Control current: 3-25mA DC
- On voltage: ≤1.5V AC
- One-off Time: ≤10ms
- Off Leakage Current: ≤2mA
- Dielectrics voltage-resistance: 2500VAC
- Environment temperature: -30 to +75
- Long service life and high reliability.
- Reduced electromagnetic interference.
- Highly reliable, compact size designed to offer users maximum simplicity.
Solid State Relay Module SSR-25DA 25A /250V 3-32V DC Input 24-380VAC Output
- Control mode: DC-AC
- Input voltage: 3-32V DC.
- Output voltage: 24-380V AC.
- Output current: 25A.
- Working voltage: 250V.
- Material: plastic + metal.
- Environment temperature: -30 to +75
- Long service life and high reliability.
- Reduced electromagnetic interference.
- Highly reliable, compact size designed to offer users maximum simplicity.
- Dimension: 6. 5Cm x 4. 5Cm x 2. 2Cm
TP5100 4.2v 8.4v Single Double Lithium Battery Charge Management Li-ion Battery Compatible 2A Charging Board
- Input voltage: 5-15V DC power supply.
- Charge status: full and unloaded blue lights, charging red.
- Double 8.4v / 4.2v lithium rechargeable single .
- Programmable charge current. 0. 1A-2A .
- Programmable steady precharge current 10% -100%.
- Wide operating voltage, maximum reach I8V.
- Red and green LED charge status indicator.
- Chip temperature protection, overcurrent protection, under voltage protection.
- Battery temperature protection, reverse battery shutdown, short circuit protection.
- Switching frequency 400Khz, usable inductance 20uH and more.
- PWR_ON Power battery for switching control.
XT60 Connector
- Manufacturer: AMASS
- Connector Series: XT60H
- Rated Voltage: DC 500V
- Metal Material: Brass Gold Plated
- Rated Current: 30A
- Momentary Current: 60A
- Number of pins: 2
- Colour: Yellow
- Contact Resistance: 0.55mΩ
- FR Level: UL94 V0
- Use Times: 1000 TIMES
- Temperature: -20℃ to 120℃
- Spatial Orientation Straight
- Compatible for Wire size up to 12AWG
- Mechanical mounting for cable
- Electrical mounting soldered
- Contact plating Gold flash

Reviews
There are no reviews yet.