I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Line Tracker following Robot Car kit and multiple gameplay
- Three programming tools are supported:Scratch,Mixly IDE and Arduino IDE
- The four-wheel-drive is powerful
- Support Bluetooth remote control
- APP supports muti-mode free switching
- Free lessons are provided
- Modular installation,simple assembly
- Integration of nine functions,a variety of way to play
- Two RGB headlights
- Support Android and IOS
This is Educational Robot STEAM Kit with an instruction manual – Line Tracker following Robot Car kit and multiple gameplay. This educational kit for beginners (kids) to urge hands-on experience about the soldering project knowledge of mechanical structure, electronic basis skills, the principle of the sensor, basic automatic control, soldering skill than on. This Learning & Education Line Tracker following Robot Car kit designed as an educational toy that integrates education, entertainment, and environmental protection, and can create a vivid and tangible course for children.
This robot car is unique for the overall structure, using the PH2.0 interface, making wiring more convenient. As it  does not require welding, not only can make the robot car look more beautiful, but also make it easier for children to get started. Additionally, it can be controlled by the mobile app (Android) via Bluetooth, as well as the PS2 controller (PS2 needs to be purchased separately), and remote control, so that children have a lot of fun in controlling the car. Moreover, the tracking module provided for it, which can be moved according to a certain line. Apart from these, this line robot car features WIFI control, Voice AI,RGB Ultrasonic,Cool Light,Light Tracking, Draw Line to Run,Gravity control,Obstacle avoidance,Infrared tracing,Infrared remote,Bluetooth module and more function.
This line robot car supports three programming ways: Arduino programming, mixed programming, scratch programming. And also the eyes of the robot car have the function of changing colors. It performs following functions:
- Searching light track by photosensitive
- Walking along the black line
- Avoiding obstacles by infrared
- Avoiding obstacles by ultrasonic
- Infrared remote control
- Bluetooth control
- PS2 remote control
- Two RGB headlights
- Support Android and IOS
- Wifi control(Need to purchase additional wifi module)

Related products
16×2 (1602) LCD Keypad Shield
- Operating Voltage:5V
- 5 Push buttons.
- RST button to reset Arduino program.
- Integrate a potentiometer for adjusting the backlight.
- Expanded available I/O pins.
- Blue light with white characters.
- Uses 4 Bit Arduino LCD Library
- Screen contrast adjustment
- Arduino Reset button
- The keypad consists of 6 keys select, up, right, down, left and reset.
- To save the digital IO pins, the keypad interface only uses one ADC channel.
- The key value is read out through a 5 stage voltage divider.
Arduino Duemilanove Development Board with USB Cable
- Microcontroller: ATmega168/ATmega 328
- Operating Voltage: 5V
- Input Voltage: 7-12V
- Input Voltage: 6-20V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 16 KB (ATmega168) or 32 KB (ATmega328) of which 2 KB used by the bootloader
- SRAM: 1 KB (ATmega168) or 2 KB (ATmega328)
- EEPROM: 512 bytes (ATmega168) or 1 KB (ATmega328)
- Clock Speed: 16 MHz
Arduino Leonardo R3
- Board Mode: LEONARDO R3
- Microcontroller: ATmega32u4
- Operating Voltage: 5V
- Input Voltage (Recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 20
- PWM Channels: 7
- Analog Input Channels: 12
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 32 KB
- SRAM: 2.5 KB (ATmega32u4)
- EEPROM: 1 KB (ATmega32u4)
- Clock Speed: 16 MHz
HC-05 Bluetooth Shield for Arduino
- Bluetooth serial port Profile
- Bluetooth protocol: Bluetooth Specification v2.0+EDR
- Frequency: 2.4GHz ISM band
- Communication Range: 10M
- Serial Bluetooth module for Arduino
- Can operate in Master, Slave or Master/Slave mode
- UART interface (TTL) with programmable baud rate (SPP firmware installed)
- Default baud rate: 38400(CMD MODE) / 9600(DATA MODE), data bits: 8, stop bit: 1, Parity: No parity
- Onboard PCB antenna
- FCC ID certificated
Joystick Shield
L293D Motor Driver Shield
- L293D motor driver chip & 74HC595 shift register
- Four H-bridges
- Terminal blocks and jumper to connect external power, for separate logic/motor supplies
- Up to 4 bi-directional DC motors with individual 8-bit speed selection
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC.
- Pull-down resistors keep motors disabled during power-up
- Big terminal block connectors to easily hook up wires (18-26AWG) and power
- Arduino reset button brought up top
- Tested compatible with Arduino Mega 1280 & 2560, Diecimila, Duemilanove, and UNO
- PCB Size: 69 x 53 mm
Pro Micro 5V 16M Mini Microcontroller Development Board For Arduino
SD Card shield V4.0 for Arduino UNO
- Standard SD card, SDHC card and TF card compatible
- 3.3v and 5v logical voltage compatible
- 2.6-3.6v DC power supply
- UART Grove & I2C connection compatible
- Fully supported SD Library
- Minimal number of SPI port
- Jumpers provided for configuring Arduino SPI port pins
- Onboard toggle switch for SD card select type
- Truly stackable
- Prototype expand Library support
- Size: 53mm x 47mm
- Weight: 35g

Reviews
There are no reviews yet.