I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
ESP32 DIY Drone Kit – Smart Flight Platform for Makers & Developers
ESP32 DIY Drone Kit – For Makers & Developers
Build, customize, and program your own drone with the ESP32 DIY Drone Kit. Featuring a powerful ESP32 controller with Wi-Fi & Bluetooth, this kit is perfect for makers, developers, and students to explore DIY drones, robotics, and IoT projects. Compatible with Arduino IDE and MicroPython, it’s ideal for learning, prototyping, and experimenting with autonomous flight.
Description
ESP32 DIY Drone Kit – Smart Flight Platform for Makers & Developers
Unleash your creativity with the ESP32 DIY Drone Kit, a powerful and flexible platform designed for makers, developers, and electronics enthusiasts. Built around the high-performance ESP32 microcontroller, this kit is perfect for learning, prototyping, and experimenting with drone technology, wireless control, and embedded systems.
The kit enables you to design and customize your own drone from the ground up—whether you’re exploring flight control algorithms, IoT integration, or autonomous features. With Wi-Fi and Bluetooth connectivity, you can easily program, monitor, and control your drone using Arduino IDE, PlatformIO, or MicroPython.
Key Features
-
ESP32-based controller with dual-core processing
-
Built-in Wi-Fi & Bluetooth for wireless control and telemetry
-
DIY-friendly design – ideal for learning and experimentation
-
Supports custom firmware and flight logic
-
Compatible with popular development tools (Arduino IDE, MicroPython)
-
Ideal for STEM education, robotics projects, and R&D
Ideal For
-
Makers & DIY enthusiasts
-
Engineering students & educators
-
Robotics and drone developers
-
IoT and embedded systems projects
Reviews (0)
Shipping & Delivery
Related products
Arduino CNC Shield
- Shield type: Arduino Nano
- Firmware: GRBL
- Modular stepper motor drivers: 3
- Limit switches: 6
- Micro-stepping: 1/16
- Coolant enable
- Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825, and others) (Not Included)
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
- Please note that this is an unassembled kit and needs soldering.
- Latest Arduino CNC Shield Version 3.51
ESP8266 WIFI Industrial stable version A full test board cloud function test Black board T5
- Support 802.11b / n / g wireless standard
- Independent development MCU platform
- High cost performance
- Support UART / GPIO data communication interface
- Support STA / AP / STA + AP coexistence mode of operation
- Support SmartLink intelligent networking (APP)
- Support wireless upgrade firmware
- Support WPS network configuration
- Built-in onboard antenna &Temperature and humidity sensor
- RGB three-color light adjustable
- Provide rich AT command set configuration
- Free AiCloud cloud service for debugging
- 3 AA batteries / 5V adapter power supply
- Size: 61.6mm x 56.2mm;
HC-06 4Pin Bluetooth Module Without Reset Switch
- Working current: matching for 30 mA, matching the communication for 8 mA.
- Dormancy current: no dormancy.
- Used for a GPS navigation system, water, and electricity gas meter reading system.
- With the computer and Bluetooth adapter, PDA, seamless connection equipment.
- Bluetooth module HC-08 Master and slave Two in one module.
- Use the CSR mainstream Bluetooth chip, Bluetooth V2.0 protocol standards.
- Potter default rate of 9600, the user can be set up.
- Bluetooth protocol: Bluetooth Specification v2.0+EDR
- Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps.
- Security: Authentication and encryption.
- Profiles: Bluetooth serial port.
Text to Speech TTL Module (Serial to Speech)
- Single row 0.1″ header for easy connection to a host system
- Power requirements: +5 VDC
- 30 mA idle
- 46-220 mA active (depending on speech parameters and output load)
- Communication: Asynchronous 9600 bps serial (8N1)
- Dimensions: 1.25″x1.5″x0.37″
-
Text support rate is better
-
Interface operation is simpler
-
5V single power supply.
-
Output directly connected to the speaker, can drive 4 ohms 3W / 8 ohm 2W speakers
-
Busy status output, can be connected to the microcontroller IO or indicator light, no need to be left floating.
-
Voice effect optimization
-
Module miniaturization and easy integration
-
Dimension: 33*27.5mm
-
With mounting holes
WH0201102 ABS 1.75 mm 1 kg Filament-Wanhao
- Material: ABS
- Color: White
- Material Diameter: 1.75mm
- Printing Temperature: 220° to 230°C
- Roundness Accuracy: +/- 0.5mm +/- 0.5mm
- Density: 1.31g/cm3 1.01g/cm3
- Mounted: Spool Mounted
- Net weight: 1kg
- Packaging Vacuum-sealed with desiccant to protect the filament from humidity
- Highly Detailed & Quality Outputs.
- Tried and Tested by Makenica.com
- Compatible with any FDM 3D Printer.
- ABS is stronger than PLA
- Easy to post-process.
- Environment friendly – ISO 9001 and ROHS certified
Reviews
There are no reviews yet.