I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-25%
LM317 DC-DC STEP DOWN CONVERTOR
Original price was: ₹375.00.₹250.00Current price is: ₹250.00. inc. GST
ACTIVE BUZZER ALARM
Original price was: ₹150.00.₹120.00Current price is: ₹120.00. inc. GST
LM386 LOW VOLTAGE AUDIO POWER AMPLIFIER
Original price was: ₹200.00.₹150.00Current price is: ₹150.00. inc. GST
- Supply Voltage: 4-15V
- Analog input voltage 0.4V (maximum)
- Quiescent Power: 24mW @ 6V
- Voltage Gain: 20 to 200 (26dB to 46dB)
- PSRR: 50dB
- Speaker impedance: 4Ω
- On board power indicator
- On board speaker wiring block
- On board 10k variable resistor, for volume adjustment
- 200 multiplier benefit circuit design
- Available in 8-Pin PDIP,SOIC and VSSOP packages
- Used in AM & FM radio amplifiers, music players, power amplifiers etc.
Dimension:41*13mm
Description
LM386 low voltage audio power amplifier is a mono audio amplifier ideal in the application which requires a small amplifier. LM386 chips are available as SO packages manufactured by TEXAS instruments. This module operates at a voltage range between 4V and 12V and has a maximum rating of 15v. This module can generate a dissipating power rate of 0.75w. LM386 low voltage audio power amplifier can provide a typical output of 325mW, under the condition supply voltage is 6v and the speaker load is 8ohm. An output power 500W generated for a 9V supply, as a result, it is a highly reliable and low-cost audio signaling device.
Power LED provided to indicate any troubleshooting. If the LED does not light up indicate the proper working of the circuit. LM386 audio amplifier IC also provides better signal gain, when a capacitor is connected between pin 1& 8. If there is no connection between these pins, the default gain will be 26db. Unnecessary oscillations avoided by the filtering capacitor in pin7.
The quiescent power drain is only 24mWÂ when operating from a 6V supply, this makes it ideal for battery operation. The LM386Â mono low voltage amplifier used in a variety of applications. It drives loads from 4ohm to 32ohm. The gain internally set as 20 and modifies from 20 to 200 using a resistor and a capacitor placed between pins 1 and 8. This device comes in three different 8-pin packages as PDIP, SOIC, and VSSOP to fit in different applications.
Reviews (0)
Shipping & Delivery
Related products
LM386N Audio Power Amplifier IC
- Wide supply voltage range: 4V–12V or 5V–18V
- Low quiescent current drain: 4mA
- Voltage gains from 20 to 200
- Ground referenced input
- Self-centering output quiescent voltage
- Low distortion: 0.2% (AV = 20, VS = 6V, RL = 8Ω, PO =125mW, f = 1kHz)
- Storage Temperature: −65˚C to +150˚C
- Operating Temperature: 0ËšC to +70ËšC
- Junction Temperature: +150ËšC
- Supply Voltage: (LM386N-4) 22V
- Vapor Phase :(60 sec) +215ËšC
- Infrared: (15 sec) +220ËšC
- Low Voltage Audio Power Amplifier
- Minimum external parts
PAM8403 DIGITAL AMPLIFIER BOARD
- 3W output at 10% THD with a 4ohm load & 5V power supply
- Output power: 3W
- Supply voltage: 2.5V-5.5V
- Low THD+N
- Superior low noise
- efficiency up to 96%
- Thermal shutdown
- Low quiescent current and low EMI
- Few external components to save space & cost
- High fidelity sound output 3W + 3W, is a rare good product
- High amplification efficiency of 85%
- Unique without LC filter class D digital power board
- Can use computer USB supply directly
- High life expectancy up to 15 years
- Dimension:24*15mm
POWER SUPPLY TDA2030 Audio Amplifier
- Operating voltage: 6V-12V
- Output peak current: 3A
- Onboard TDA2030A Audio amplifier Board
- Mono channel 18W Power amplifier circuit design
- Onboard horn socket
- Onboard 10 k adjustable resistance, can adjust the volume of the amplification
- Onboard power indicator light
- Low harmonic distortion
- Chip has lead to the main pin, can directly input audio signal
- Short circuit& thermal shutdown protection
- Dimension:32*24mm
- Weight:10gm
Red – 2 Channel 3W Digital Power PAM8403 Class D Audio Amplifier Board USB 5V
- Input Voltage: 2.5-5.5 V (USB power supply).
- Output Impedance: 4 ohm.
- Efficiency: 90%.
- Frequency Response: 150 Hz – 20 KHz.
- Input Impedance: 2 K ohm.
- A class D-type amplifier without a filter, low quiescent current, and low EMI.
- Good noise suppression.
- Input audio should be via sheilded wire.
- Dual channel stereo output 3 w + 3 w power.
- Works with 5v power supply.
- Can directly drive 4 /8 Ohm small speakers.
- When connects with a 4-ohm load and 5V power supply, the output power can be up to 3W.
- Low THD, low noise.
- Short circuit protectioN, thermal protection.
- Dimensions: 15 x 20 mm.
TDA7266 Dual Audio Channel 7W + 7W Amplifier Module
- Operating Voltage Range: 3 V to 18 V
- Power supply:14W
- On-board TDA7266 stereo audio amplifier chip
- Output: dual-channel 7W + 7W
- On-board 5.08 mm terminal blocks for the left and right audio channels
- On-board potentiometer for volume adjustment
- DC power jack
- Minimum external components
- On board TDA7266 audio power amplifier chip, double track 7W + 7W, suitable for 4-8 Euro, 5-15W speakers.
- The main pin has led chip, convenient external device control, onboard 2 road 5.08 (mm) distance between two p terminal, around a track connection output respectively.
- The on-board dial potentiometer, output size can adjust the volume.
- Support in DC, terminal blocks, row needles 3 power input mode, the default for the DC,
- Standby and mute functions
- Short-circuit protection
- Thermal overload protection
- Dimension:45mm * 33mm * 30mm
- Weight:7g
Reviews
There are no reviews yet.