I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Mini 0.36 Digital Voltmeter DC 4.7-32V 2 Wires Voltage Panel Meter LED Display – Red
₹200.00 Original price was: ₹200.00.₹175.00Current price is: ₹175.00. inc. GST
- Measurement range: 4.7V to 30V DC
- Only 2 wires, derives supply from the source
- Operation current: < 30mA
- Display colour: RED
- Measurement Error tolerance: +/- 2 percent
- Distance between mounting holes: 26mm
- Current Consumption: < 15 mA.
- Accuracy: 0.1 V.
- Wire length: 18cm.
- Refresh Speed : Approx. 200mS/time.
- Very small and lightweight voltmeter module.
- Very handy and easy to use.
- LED display.
- Best operates in the working voltage range of 5V to 24V
- Dimension: 30mm x 12mm x 8.5mm
This Mini 0.36 Digital Voltmeter DC 4.7-32V 2 Wires Voltage Panel Meter LED Display is designed explicitly for Vehicles Motor. This DC voltmeter is defined as one of the prominent devices used by an electronics technician. It is a perfect tool for most applications and consumes less than 30mA from the target voltage source to power itself. The 2 wires on the panel meter display module hook up to the target voltage point. And measure the voltage reading on the 3 digits seven segment display.
This is highly accurate and compact-sized digital voltmeter comes with an LED Display. In this module, the voltmeter uses 0.36-inch digital tube display, with a super small volume. To achieve the best measurement precision, voltage is measured according to the different automatic moving positions of the decimal point. During the connection, the red wire is to connect to the positive pole, and the black wire is to connect to the negative pole. As the module features reverse polarity protection, there is no need to worry if there exists any mismatch while connecting.
This voltmeter doesn’t need external drive working power, it can work with measuring voltage, the working voltage’s range is 4.5-30V. In order to obtain high measurement accuracy, the position of decimal points moved automatically according to the different measuring voltages. When the measured voltage is below 10V, it displays two places after the decimal point. Whereas when it measures above 10V, it will display one place after the decimal point.
This voltmeter is widely used to measure the storage battery’s voltage in motorcycles and cars and also can grasp the storage battery’s status. It also can be used to measure other voltages. As the 30V is the maximum operating limited voltage of voltmeter’s, during operating please leave enough margin. This avoids the voltmeter’s permanent damage due to an electrical spark, power supply ripple, or other too high abrupt change of voltage.

Related products
10 Pieces Diamond Burr Bits Drill Kit for Engraving Carving Rotary Tool Set
- High-quality diamond-coated bur set with 3.1mm shanks
- Suitable for the hanging mill, electric mill, engraving machines, electric machinery
- Can Carve wood, plastic and other soft materials
- Can be used to various applications including carving, grinding and etching on a variety materials
- Perfect For All Sorts Off Jobs Like Model Making,
- Compatible With Other Multi-Tool Machines
- Supporting assembly mainly used to polish glass, jade, repair abrasive and other hard objects electroplated diamond grinding
- 10 pieces assortment of various shapes and sizes bits
- Come in different sizes and coarseness to satisfy any technology fit most professional electric drills,
- Best for replacing nail drill bits can be used to various applications
- High efficiency, high-quality finish, long service life, good economic returns.
- Easy to use, safe and reliable, can reduce labor intensity.
- length: approx. 6cm
- Materials: HSS
Dc 4.5V-40V to 5V 2A USB Charger DC-DC Step-Down Buck Converter Voltmeter
- Input voltage: DC 4.5 ~ 40V.
- Output voltage: 5V (when the input voltage is between 6.5V ~ 40V).
- Output current: 2A.
- The voltmeter has an automatic calibration function.
- With reverse connection protection.
- With overheat protection and short circuit protection.
- The voltmeter has an automatic calibration function.
- With reverse connection protection.
- With overheat protection and short circuit protection.
- High efficiency and low ripple.
- With USB power indicator light.
DC-DC BOOST CONVERTER STEP UP I/P: 10V – 32V O/P: 12V -35V/6A
- Input voltage: 10V-32V DC
- Output voltage: 12V-35V DC
- Output Current: 6A
- Output ripple: 2% MAX
- Output power: 150 W
- Working temperature: -40 degree to 85 degree
- No load current:25mA
- Voltage regulation:+-0.5%
- Load regulation:+-0.5%
- Dynamic response speed: 200uS 5%
- The non-isolated step-up power conversion module
- Onboard LED illuminates when the voltage is applied to the module
- Equips Multi-turn Potentiometer.
- Easy to drive 65W 90W dual-core notebook.
- The output voltage is continuously adjustable on OUT+ and OUT- screw terminals
- Dimension:2 .60*1.85*1.1inch
Digital LCD Ampere Voltage Meter Ammeter Voltmeter AC 80 300V 100A
- Material: ABS
- Colour: White
- Voltage Measurement Range: AC 80-300V
- Current Measurement Range: AC 0-100.0A
- Power supply: < 0.2V*A
- Installation: Embedded installation
- Accuracy: 1% ± 2digit
- Measurement speed: about 2 times per second
- Display Type: LCD with blue backlight
- Operating Temperature: 10deg. C ~65deg. C
- Operating Humidity: 35~85 per cent RH
- Current Transformer: included
- Widely used in substation automation, distribution automation, test equipment, voltage     regulator and so on
- Dimension: Approx. 7x4.1x3.2cm
MA-3485 Pocket 60x LED Currency Detecting Microscope
- Light Source Type: LED
- Colour: Silver
- Material: ABS + Acrylic
- Lens Material: Glass
- Power Supply: 3* CR1620 Button
- Lens diameter: 10mm
- Magnification strength: 60x
- 2 x LED lights, 1 x UV light
- Comes with a faux leather pouch to protect from scratches and other damage
- Used for inspecting tiny objects and inspecting hallmarks.
- It is ideal for the watchmaking industry, Jewellery industry, coins, stamps, and the antique industry
- Dimensions: 37mm * 41mm * 18mm
Titanium HSS 9-Step Cone Drill 4-12MM Hex Shank 1/4 Hole Cutter Drilling Tool
- Shank: 1/4 Hex Shank
- Comes in 4-12MM ( 4,5,6,7,8,9,10,11,12MM )sizes
- Material: HSS
- The ladder of its unique structure, a bit can open a variety of specifications of aperture.
- No need to use center punch, compared with the ordinary twist drill is not easy to be broken.
- Deburring, chamfering, elliptic hole enlargement, twist drill, the function of them was unable, but it is possible.
- The usage of tools: drill, bench drill. Work while water cooling can effectively extend the service life of drill bit
- Do not need to use center punch, compared with the ordinary twist drill is not easy to be broken.
- Deburring, chamfering, elliptic hole enlargement, twist drill, the function of them was unable, but it is possible.
- Size: Approx. 72mm
- Weight: 21g
TM1637 4 Bits Digital Tube LED Display Module With Clock Display for Arduino
- Driver Chip: MAX7219
- Input Voltage: 3.7 to 5.3 V
- Input Current: 30 mA
- Display Dimensions: 42x24x12 (LxWxH) mm
- Ease to use.
- Ease of multiplexing.
- Can use as a 4 digit display unit.
- Can use as a clock display.
- The counter project uses 7 segment display.
- 4 M2 screws positioning holes for easy installation
Voltage Divider Module for boards compatible with Arduino
- Working Voltage: 5.0 V DC
- Measurement Accuracy: <=1%
- Input Range: 25V max
- Resistor Tolerance: 0.5%
- Temperature Coefficient: 50PPM/°C
- Ratio: 0.18 ( ADC reference voltage / 0.18)
- External voltage and grove interface
- Eliminates the need to connect resistance to the input interface
- Adjustable gain
- Easy to use

Reviews
There are no reviews yet.